[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230215200213.GA467386-robh@kernel.org>
Date: Wed, 15 Feb 2023 14:02:13 -0600
From: Rob Herring <robh@...nel.org>
To: Frieder Schrempf <frieder@...s.de>
Cc: devicetree@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org, Mark Brown <broonie@...nel.org>,
Robin Gong <yibin.gong@....com>, Marek Vasut <marex@...x.de>,
Frieder Schrempf <frieder.schrempf@...tron.de>,
Per-Daniel Olsson <perdo@...s.com>,
Rickard x Andersson <rickaran@...s.com>
Subject: Re: [PATCH 1/6] dt-bindings: regulator: pca9450: Document new usage
of sd-vsel-gpios
On Mon, Feb 13, 2023 at 04:58:19PM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@...tron.de>
>
> The sd-vsel-gpios property is abandoned in its current meaning as an
> output. We now use it to specify an optional signal that can be
> evaluated by the driver in order to retrieve the current status
> of the SD_VSEL signal that is used to select the control register
> of LDO5.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@...tron.de>
> ---
> .../regulator/nxp,pca9450-regulator.yaml | 23 ++++++++++++++-----
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
> index 835b53302db8..c86534538a4e 100644
> --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
> @@ -40,8 +40,24 @@ properties:
> description: |
> list of regulators provided by this controller
>
> + properties:
> + LDO5:
> + type: object
> + $ref: regulator.yaml#
> + description:
> + Properties for single LDO5 regulator.
> +
> + properties:
> + sd-vsel-gpios:
It is a pin on the device, right? Then it belongs in the device node as
it was.
Can't the direction of the signal tell you how it is used? Assuming the
pin is bidirectional?
The binding should support any possible way the device is wired, not
just what's been seen so far on some boards.
Rob
Powered by blists - more mailing lists