lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230215065520.5535-2-manivannan.sadhasivam@linaro.org>
Date:   Wed, 15 Feb 2023 12:25:12 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     andersson@...nel.org
Cc:     konrad.dybcio@...aro.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        viresh.kumar@...aro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 01/12] arm64: dts: qcom: sdm845: Supply clock from cpufreq node to CPUs

Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.

So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 479859bd8ab3..1d5e6ade8ae7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -92,6 +92,7 @@ CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x0>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -118,6 +119,7 @@ CPU1: cpu@100 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x100>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -140,6 +142,7 @@ CPU2: cpu@200 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x200>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -162,6 +165,7 @@ CPU3: cpu@300 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x300>;
+			clocks = <&cpufreq_hw 0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <611>;
 			dynamic-power-coefficient = <290>;
@@ -184,6 +188,7 @@ CPU4: cpu@400 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x400>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -206,6 +211,7 @@ CPU5: cpu@500 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x500>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -228,6 +234,7 @@ CPU6: cpu@600 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x600>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -250,6 +257,7 @@ CPU7: cpu@700 {
 			device_type = "cpu";
 			compatible = "qcom,kryo385";
 			reg = <0x0 0x700>;
+			clocks = <&cpufreq_hw 1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <442>;
@@ -5232,6 +5240,7 @@ cpufreq_hw: cpufreq@...43000 {
 			clock-names = "xo", "alternate";
 
 			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
 		};
 
 		wifi: wifi@...00000 {
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ