[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2551514.Lt9SDvczpP@steina-w>
Date: Wed, 15 Feb 2023 08:26:16 +0100
From: Alexander Stein <alexander.stein@...tq-group.com>
To: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Liu Ying <victor.liu@....com>
Cc: marex@...x.de, stefan@...er.ch, airlied@...il.com, daniel@...ll.ch,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com,
krzysztof.kozlowski@...aro.org, LW@...o-electronics.de
Subject: Re: [PATCH v3 1/6] dt-bindings: lcdif: Add i.MX93 LCDIF support
Hi Liu,
thanks for the update.
Am Montag, 13. Februar 2023, 09:56:07 CET schrieb Liu Ying:
> There is one LCDIF embedded in i.MX93 SoC to connect with
> MIPI DSI controller through LCDIF cross line pattern(controlled
> by mediamix blk-ctrl) or connect with LVDS display bridge(LDB)
> directly or connect with a parallel display through parallel
> display format(also controlled by mediamix blk-ctrl). i.MX93
> LCDIF IP is essentially the same to i.MX8MP LCDIF IP. Add device
> tree binding for i.MX93 LCDIF.
>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> Reviewed-by: Marek Vasut <marex@...x.de>
> Signed-off-by: Liu Ying <victor.liu@....com>
> ---
> v2->v3:
> * No change.
>
> v1->v2:
> * Add Krzysztof's A-b and Marek's R-b tags on patch 1/6.
>
> Documentation/devicetree/bindings/display/fsl,lcdif.yaml | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
> b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml index
> 75b4efd70ba8..fc11ab5fc465 100644
> --- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
> +++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
> @@ -21,6 +21,7 @@ properties:
> - fsl,imx28-lcdif
> - fsl,imx6sx-lcdif
> - fsl,imx8mp-lcdif
> + - fsl,imx93-lcdif
> - items:
> - enum:
> - fsl,imx6sl-lcdif
> @@ -88,7 +89,9 @@ allOf:
> properties:
> compatible:
> contains:
> - const: fsl,imx8mp-lcdif
> + enum:
> + - fsl,imx8mp-lcdif
> + - fsl,imx93-lcdif
> then:
> properties:
> clocks:
> @@ -107,6 +110,7 @@ allOf:
> enum:
> - fsl,imx6sx-lcdif
> - fsl,imx8mp-lcdif
> + - fsl,imx93-lcdif
> then:
> properties:
> clocks:
> @@ -123,6 +127,7 @@ allOf:
> - fsl,imx8mm-lcdif
> - fsl,imx8mn-lcdif
> - fsl,imx8mp-lcdif
> + - fsl,imx93-lcdif
> then:
> required:
> - power-domains
I would have expected that fsl,imx93-lcdif supports up to 3 endpoints (MIPI
DSI, LVDS, and parallel) in a 'ports' subnode. But this binding only supports
a single 'port' sub-node. Also an example for this case might be very helpful.
Best regards,
Alexander
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Powered by blists - more mailing lists