Date:   Thu, 16 Feb 2023 23:50:22 +0530
From:   Sunil V L <sunilvl@...tanamicro.com>
To:     Palmer Dabbelt <palmer@...belt.com>,
        Albert Ou <aou@...s.berkeley.edu>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        "Rafael J . Wysocki" <rafael@...nel.org>,
        Len Brown <lenb@...nel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Marc Zyngier <maz@...nel.org>, Jonathan Corbet <corbet@....net>
Cc:     linux-riscv@...ts.infradead.org, linux-acpi@...r.kernel.org,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        Conor Dooley <conor.dooley@...rochip.com>,
        Andrew Jones <ajones@...tanamicro.com>,
        Anup Patel <apatel@...tanamicro.com>,
        Atish Patra <atishp@...osinc.com>,
        Sunil V L <sunilvl@...tanamicro.com>
Subject: [PATCH V2 00/21] Add basic ACPI support for RISC-V

This patch series enables the basic ACPI infrastructure for RISC-V.
Supporting external interrupt controllers is in progress and hence it is
tested using poll based HVC SBI console and RAM disk.

The first patch in this series is one of the patch from Jisheng's
series [1] which is not merged yet. This patch is required to support
ACPI since efi_init() which gets called before sbi_init() can enable
static branches and hits panic.

The series depends on Anup's IPI improvement series [2].

[1] https://lore.kernel.org/all/20220821140918.3613-1-jszhang@kernel.org/
[2] https://lore.kernel.org/lkml/20230103141221.772261-7-apatel@ventanamicro.com/T/

Changes since V1:
	1) Dropped PCI changes and instead added dummy interfaces just to enable
	   building ACPI core when CONFIG_PCI is enabled. Actual PCI changes will
	   be added in future along with external interrupt controller support
	   in ACPI.
	2) Squashed couple of patches so that new code added gets built in each
	   commit.
	3) Fixed the missing wake_cpu code in timer refactor patch as pointed by
	   Conor
	4) Fixed an issue with SMP disabled.
	5) Addressed other comments from Conor.
	6) Updated documentation patch as per feedback from Sanjaya.
	7) Fixed W=1 and checkpatch --strict issues.
	8) Added ACK/RB tags

These changes are available at
https://github.com/vlsunil/linux/commits/acpi_b1_us_review_ipi17_V2

Testing:
1) Build Qemu with ACPI support using below branch
https://github.com/vlsunil/qemu/tree/acpi_b1_us_review_V3

2) Build EDK2 as per instructions in
https://github.com/vlsunil/riscv-uefi-edk2-docs/wiki/RISC-V-Qemu-Virt-support

3) Build Linux after enabling SBI HVC and SBI earlycon
CONFIG_RISCV_SBI_V01=y
CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
CONFIG_HVC_RISCV_SBI=y

4) Build buildroot.

Run with below command.
qemu-system-riscv64   -nographic \
-drive file=Build/RiscVVirtQemu/RELEASE_GCC5/FV/RISCV_VIRT.fd,if=pflash,format=raw,unit=1 \
-machine virt,acpi -smp 16 -m 2G \
-kernel arch/riscv/boot/Image \
-initrd buildroot/output/images/rootfs.cpio \
-append "root=/dev/ram ro console=hvc0 earlycon=sbi"


Jisheng Zhang (1):
  riscv: move sbi_init() earlier before jump_label_init()

Sunil V L (20):
  ACPICA: MADT: Add RISC-V INTC interrupt controller
  ACPICA: Add structure definitions for RISC-V RHCT
  RISC-V: Add support to build the ACPI core
  ACPI: Kconfig: Enable ACPI_PROCESSOR for RISC-V
  ACPI: OSL: Make should_use_kmap() 0 for RISC-V.
  ACPI: processor_core: RISC-V: Enable mapping processor to the hartid
  drivers/acpi: RISC-V: Add RHCT related code
  RISC-V: smpboot: Create wrapper smp_setup()
  RISC-V: smpboot: Add ACPI support in smp_setup()
  RISC-V: ACPI: Add a function to retrieve the hartid
  RISC-V: cpufeature: Add ACPI support in riscv_fill_hwcap()
  RISC-V: cpu: Enable cpuinfo for ACPI systems
  irqchip/riscv-intc: Add ACPI support
  clocksource/timer-riscv: Refactor riscv_timer_init_dt()
  clocksource/timer-riscv: Add ACPI support
  RISC-V: time.c: Add ACPI support for time_init()
  RISC-V: Add ACPI initialization in setup_arch()
  RISC-V: Enable ACPI in defconfig
  MAINTAINERS: Add entry for drivers/acpi/riscv
  Documentation/kernel-parameters.txt: Add RISC-V for ACPI parameter

 .../admin-guide/kernel-parameters.txt         |   8 +-
 MAINTAINERS                                   |   7 +
 arch/riscv/Kconfig                            |   5 +
 arch/riscv/configs/defconfig                  |   2 +
 arch/riscv/include/asm/acenv.h                |  11 +
 arch/riscv/include/asm/acpi.h                 |  87 ++++++
 arch/riscv/include/asm/cpu.h                  |   8 +
 arch/riscv/kernel/Makefile                    |   2 +
 arch/riscv/kernel/acpi.c                      | 248 ++++++++++++++++++
 arch/riscv/kernel/cpu.c                       |  31 ++-
 arch/riscv/kernel/cpufeature.c                |  41 ++-
 arch/riscv/kernel/setup.c                     |  27 +-
 arch/riscv/kernel/smpboot.c                   |  75 +++++-
 arch/riscv/kernel/time.c                      |  25 +-
 drivers/acpi/Kconfig                          |   2 +-
 drivers/acpi/Makefile                         |   2 +
 drivers/acpi/osl.c                            |   2 +-
 drivers/acpi/processor_core.c                 |  29 ++
 drivers/acpi/riscv/Makefile                   |   2 +
 drivers/acpi/riscv/rhct.c                     |  92 +++++++
 drivers/clocksource/timer-riscv.c             |  93 ++++---
 drivers/irqchip/irq-riscv-intc.c              |  78 +++++-
 include/acpi/actbl2.h                         |  68 ++++-
 23 files changed, 854 insertions(+), 91 deletions(-)
 create mode 100644 arch/riscv/include/asm/acenv.h
 create mode 100644 arch/riscv/include/asm/acpi.h
 create mode 100644 arch/riscv/include/asm/cpu.h
 create mode 100644 arch/riscv/kernel/acpi.c
 create mode 100644 drivers/acpi/riscv/Makefile
 create mode 100644 drivers/acpi/riscv/rhct.c

-- 
2.34.1

Powered by blists - more mailing lists