| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230216080423.513746-1-awkrail01@gmail.com>
Date: Thu, 16 Feb 2023 17:04:23 +0900
From: Taichi Nishimura <awkrail01@...il.com>
To: andrii@...nel.org, mykolal@...com, ast@...nel.org,
daniel@...earbox.net, martin.lau@...ux.dev, song@...nel.org,
yhs@...com, john.fastabend@...il.com, kpsingh@...nel.org,
sdf@...gle.com, haoluo@...gle.com, jolsa@...nel.org,
shuah@...nel.org, davem@...emloft.net, kuba@...nel.org,
hawk@...nel.org, nathan@...nel.org, ndesaulniers@...gle.com,
trix@...hat.com, awkrail01@...il.com, iii@...ux.ibm.com,
ytcoode@...il.com, deso@...teo.net, memxor@...il.com,
joannelkoong@...il.com, rdunlap@...radead.org
Cc: bpf@...r.kernel.org, linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
llvm@...ts.linux.dev
Subject: [PATCH bpf-next] Fix typos in selftest/bpf files
This patch is a re-submitting patch.
I cloned bpf-next repo, run spell checker, and fixed typos.
Included v1 and v2 patches to this one.
Could you review it again?
Let me know if I have any mistakes.
Best regards,
Taichi Nishimura
Signed-off-by: Taichi Nishimura <awkrail01@...il.com>
---
tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c | 2 +-
tools/testing/selftests/bpf/prog_tests/trampoline_count.c | 2 +-
.../testing/selftests/bpf/progs/btf_dump_test_case_syntax.c | 2 +-
tools/testing/selftests/bpf/progs/dynptr_fail.c | 2 +-
tools/testing/selftests/bpf/progs/strobemeta.h | 2 +-
tools/testing/selftests/bpf/progs/test_cls_redirect.c | 6 +++---
tools/testing/selftests/bpf/progs/test_subprogs.c | 2 +-
tools/testing/selftests/bpf/progs/test_xdp_vlan.c | 2 +-
tools/testing/selftests/bpf/test_cpp.cpp | 2 +-
tools/testing/selftests/bpf/veristat.c | 4 ++--
10 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
index eb2feaac81fe..653b0a20fab9 100644
--- a/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
+++ b/tools/testing/selftests/bpf/prog_tests/migrate_reuseport.c
@@ -488,7 +488,7 @@ static void run_test(struct migrate_reuseport_test_case *test_case,
goto close_servers;
}
- /* Tie requests to the first four listners */
+ /* Tie requests to the first four listeners */
err = start_clients(test_case);
if (!ASSERT_OK(err, "start_clients"))
goto close_clients;
diff --git a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c
index 8fd4c0d78089..e91d0d1769f1 100644
--- a/tools/testing/selftests/bpf/prog_tests/trampoline_count.c
+++ b/tools/testing/selftests/bpf/prog_tests/trampoline_count.c
@@ -79,7 +79,7 @@ void serial_test_trampoline_count(void)
if (!ASSERT_EQ(link, NULL, "ptr_is_null"))
goto cleanup;
- /* and finaly execute the probe */
+ /* and finally execute the probe */
prog_fd = bpf_program__fd(prog);
if (!ASSERT_GE(prog_fd, 0, "bpf_program__fd"))
goto cleanup;
diff --git a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
index 26fffb02ed10..ad21ee8c7e23 100644
--- a/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
+++ b/tools/testing/selftests/bpf/progs/btf_dump_test_case_syntax.c
@@ -84,7 +84,7 @@ typedef void (*printf_fn_t)(const char *, ...);
* typedef int (*fn_t)(int);
* typedef char * const * (*fn_ptr2_t)(s_t, fn_t);
*
- * - `fn_complext_t`: pointer to a function returning struct and accepting
+ * - `fn_complex_t`: pointer to a function returning struct and accepting
* union and struct. All structs and enum are anonymous and defined inline.
*
* - `signal_t: pointer to a function accepting a pointer to a function as an
diff --git a/tools/testing/selftests/bpf/progs/dynptr_fail.c b/tools/testing/selftests/bpf/progs/dynptr_fail.c
index 5950ad6ec2e6..aa5b69354b91 100644
--- a/tools/testing/selftests/bpf/progs/dynptr_fail.c
+++ b/tools/testing/selftests/bpf/progs/dynptr_fail.c
@@ -630,7 +630,7 @@ static int release_twice_callback_fn(__u32 index, void *data)
}
/* Test that releasing a dynptr twice, where one of the releases happens
- * within a calback function, fails
+ * within a callback function, fails
*/
SEC("?raw_tp")
__failure __msg("arg 1 is an unacquired reference")
diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h
index 753718595c26..e562be6356f3 100644
--- a/tools/testing/selftests/bpf/progs/strobemeta.h
+++ b/tools/testing/selftests/bpf/progs/strobemeta.h
@@ -135,7 +135,7 @@ struct strobe_value_loc {
* tpidr_el0 for aarch64).
* TLS_IMM_EXEC: absolute address of GOT entry containing offset
* from thread pointer;
- * TLS_GENERAL_DYN: absolute addres of double GOT entry
+ * TLS_GENERAL_DYN: absolute address of double GOT entry
* containing tls_index_t struct;
*/
int64_t offset;
diff --git a/tools/testing/selftests/bpf/progs/test_cls_redirect.c b/tools/testing/selftests/bpf/progs/test_cls_redirect.c
index 2833ad722cb7..66b304982245 100644
--- a/tools/testing/selftests/bpf/progs/test_cls_redirect.c
+++ b/tools/testing/selftests/bpf/progs/test_cls_redirect.c
@@ -600,7 +600,7 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap,
return TC_ACT_SHOT;
}
- /* Skip the remainig next hops (may be zero). */
+ /* Skip the remaining next hops (may be zero). */
return skip_next_hops(pkt, encap->unigue.hop_count -
encap->unigue.next_hop - 1);
}
@@ -610,8 +610,8 @@ static INLINING ret_t get_next_hop(buf_t *pkt, encap_headers_t *encap,
*
* fill_tuple(&t, foo, sizeof(struct iphdr), 123, 321)
*
- * clang will substitue a costant for sizeof, which allows the verifier
- * to track it's value. Based on this, it can figure out the constant
+ * clang will substitute a constant for sizeof, which allows the verifier
+ * to track its value. Based on this, it can figure out the constant
* return value, and calling code works while still being "generic" to
* IPv4 and IPv6.
*/
diff --git a/tools/testing/selftests/bpf/progs/test_subprogs.c b/tools/testing/selftests/bpf/progs/test_subprogs.c
index f8e9256cf18d..a8d602d7c88a 100644
--- a/tools/testing/selftests/bpf/progs/test_subprogs.c
+++ b/tools/testing/selftests/bpf/progs/test_subprogs.c
@@ -47,7 +47,7 @@ static __noinline int sub5(int v)
return sub1(v) - 1; /* compensates sub1()'s + 1 */
}
-/* unfortunately verifier rejects `struct task_struct *t` as an unkown pointer
+/* unfortunately verifier rejects `struct task_struct *t` as an unknown pointer
* type, so we need to accept pointer as integer and then cast it inside the
* function
*/
diff --git a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
index cdf3c48d6cbb..4ddcb6dfe500 100644
--- a/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
+++ b/tools/testing/selftests/bpf/progs/test_xdp_vlan.c
@@ -98,7 +98,7 @@ bool parse_eth_frame(struct ethhdr *eth, void *data_end, struct parse_pkt *pkt)
return true;
}
-/* Hint, VLANs are choosen to hit network-byte-order issues */
+/* Hint, VLANs are chosen to hit network-byte-order issues */
#define TESTVLAN 4011 /* 0xFAB */
// #define TO_VLAN 4000 /* 0xFA0 (hint 0xOA0 = 160) */
diff --git a/tools/testing/selftests/bpf/test_cpp.cpp b/tools/testing/selftests/bpf/test_cpp.cpp
index 0bd9990e83fa..f4936834f76f 100644
--- a/tools/testing/selftests/bpf/test_cpp.cpp
+++ b/tools/testing/selftests/bpf/test_cpp.cpp
@@ -91,7 +91,7 @@ static void try_skeleton_template()
skel.detach();
- /* destructor will destory underlying skeleton */
+ /* destructor will destroy underlying skeleton */
}
int main(int argc, char *argv[])
diff --git a/tools/testing/selftests/bpf/veristat.c b/tools/testing/selftests/bpf/veristat.c
index f961b49b8ef4..83231456d3c5 100644
--- a/tools/testing/selftests/bpf/veristat.c
+++ b/tools/testing/selftests/bpf/veristat.c
@@ -144,7 +144,7 @@ static struct env {
struct verif_stats *prog_stats;
int prog_stat_cnt;
- /* baseline_stats is allocated and used only in comparsion mode */
+ /* baseline_stats is allocated and used only in comparison mode */
struct verif_stats *baseline_stats;
int baseline_stat_cnt;
@@ -882,7 +882,7 @@ static int process_obj(const char *filename)
* that BPF object file is incomplete and has to be statically
* linked into a final BPF object file; instead of bailing
* out, report it into stderr, mark it as skipped, and
- * proceeed
+ * proceed
*/
fprintf(stderr, "Failed to open '%s': %d\n", filename, -errno);
env.files_skipped++;
--
2.25.1
Powered by blists - more mailing lists