linux-kernel - Re: [RESEND PATCH 01/12] arm64: dts: qcom: sdm845: Supply clock from cpufreq node to CPUs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e8f1110e-7f60-3031-25d4-d4993fa04cb9@linaro.org>
Date:   Thu, 16 Feb 2023 11:33:09 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        andersson@...nel.org
Cc:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, viresh.kumar@...aro.org
Subject: Re: [RESEND PATCH 01/12] arm64: dts: qcom: sdm845: Supply clock from
 cpufreq node to CPUs



On 15.02.2023 08:03, Manivannan Sadhasivam wrote:
> Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
> to the CPU cores. But this relationship is not represented in DTS so far.
> 
> So let's make cpufreq node as the clock provider and CPU nodes as the
> consumers. The clock index for each CPU node is based on the frequency
> domain index.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 479859bd8ab3..1d5e6ade8ae7 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -92,6 +92,7 @@ CPU0: cpu@0 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <611>;
>  			dynamic-power-coefficient = <290>;
> @@ -118,6 +119,7 @@ CPU1: cpu@100 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x100>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <611>;
>  			dynamic-power-coefficient = <290>;
> @@ -140,6 +142,7 @@ CPU2: cpu@200 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x200>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <611>;
>  			dynamic-power-coefficient = <290>;
> @@ -162,6 +165,7 @@ CPU3: cpu@300 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x300>;
> +			clocks = <&cpufreq_hw 0>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <611>;
>  			dynamic-power-coefficient = <290>;
> @@ -184,6 +188,7 @@ CPU4: cpu@400 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x400>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <442>;
> @@ -206,6 +211,7 @@ CPU5: cpu@500 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x500>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <442>;
> @@ -228,6 +234,7 @@ CPU6: cpu@600 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x600>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <442>;
> @@ -250,6 +257,7 @@ CPU7: cpu@700 {
>  			device_type = "cpu";
>  			compatible = "qcom,kryo385";
>  			reg = <0x0 0x700>;
> +			clocks = <&cpufreq_hw 1>;
>  			enable-method = "psci";
>  			capacity-dmips-mhz = <1024>;
>  			dynamic-power-coefficient = <442>;
> @@ -5232,6 +5240,7 @@ cpufreq_hw: cpufreq@...43000 {
>  			clock-names = "xo", "alternate";
>  
>  			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
>  		};
>  
>  		wifi: wifi@...00000 {