linux-kernel - [PATCH v2] cpufreq: qcom-hw: Simplify counting frequency domains

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230216105140.3938749-1-konrad.dybcio@linaro.org>
Date:   Thu, 16 Feb 2023 11:51:40 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     linux-arm-msm@...r.kernel.org, andersson@...nel.org,
        agross@...nel.org
Cc:     marijn.suijten@...ainline.org,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        "Rafael J. Wysocki" <rafael@...nel.org>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2] cpufreq: qcom-hw: Simplify counting frequency domains

For quite some time, this driver has been performing some quite
low-level DT operations. Simplify that using platform_get_resource.

Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
v1 -> v2:
- remove stray newline near probe return
- s/doing performing/performing/

v1: https://lore.kernel.org/linux-arm-msm/20230216102956.3933639-1-konrad.dybcio@linaro.org/T/#u

 drivers/cpufreq/qcom-cpufreq-hw.c | 29 ++++++-----------------------
 1 file changed, 6 insertions(+), 23 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 2f581d2d617d..575a4461c25a 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -29,6 +29,8 @@
 
 #define GT_IRQ_STATUS			BIT(2)
 
+#define MAX_FREQ_DOMAINS		3
+
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
 	u32 reg_domain_state;
@@ -651,10 +653,9 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 {
 	struct clk_hw_onecell_data *clk_data;
 	struct device *dev = &pdev->dev;
-	struct device_node *soc_node;
 	struct device *cpu_dev;
 	struct clk *clk;
-	int ret, i, num_domains, reg_sz;
+	int ret, i, num_domains;
 
 	clk = clk_get(dev, "xo");
 	if (IS_ERR(clk))
@@ -681,24 +682,9 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
-	soc_node = of_get_parent(dev->of_node);
-	if (!soc_node)
-		return -EINVAL;
-
-	ret = of_property_read_u32(soc_node, "#address-cells", &reg_sz);
-	if (ret)
-		goto of_exit;
-
-	ret = of_property_read_u32(soc_node, "#size-cells", &i);
-	if (ret)
-		goto of_exit;
-
-	reg_sz += i;
-
-	num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * reg_sz);
-	if (num_domains <= 0)
-		return num_domains;
+	for (num_domains = 0; num_domains < MAX_FREQ_DOMAINS; num_domains++)
+		if (!platform_get_resource(pdev, IORESOURCE_MEM, num_domains))
+			break;
 
 	qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains,
 					 GFP_KERNEL);
@@ -762,9 +748,6 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
 	else
 		dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n");
 
-of_exit:
-	of_node_put(soc_node);
-
 	return ret;
 }
 
-- 
2.39.1