[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+HBbNHTGX1BBhQuOSfwo=j-+dY9KgDpYn4Ty9m0fU5aiMV-Zw@mail.gmail.com>
Date: Thu, 16 Feb 2023 11:59:17 +0100
From: Robert Marko <robert.marko@...tura.hr>
To: Konrad Dybcio <konrad.dybcio@...aro.org>
Cc: agross@...nel.org, andersson@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
luka.perkov@...tura.hr
Subject: Re: [PATCH 2/4] ARM: dts: qcom: ipq4018-ap120c-ac: align GPIO hog
with DT schema
On Thu, Feb 16, 2023 at 11:48 AM Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
>
>
>
> On 14.02.2023 17:12, Robert Marko wrote:
> > Align USB power GPIO hog node to DT schema.
> >
> > Signed-off-by: Robert Marko <robert.marko@...tura.hr>
> > ---
> Unless you submitted a separate patch for this, I only see
> hog being allowed in 845 TLMM.
No, cause there is a gpio-hog schema in dtschema and I did not
even look into the pinctrl bindings and dtbs_check is not throwing
a warning.
I dont really see a point further allowing it in pinctrl bindings.
Regards,
Robert
>
> Konrad
> > arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> > index 38efd45433da5..cd2a32d0d5548 100644
> > --- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> > +++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dtsi
> > @@ -76,7 +76,7 @@ mux_cs {
> > };
> > };
> >
> > - usb-power {
> > + usb-power-hog {
> > line-name = "USB-power";
> > gpios = <1 GPIO_ACTIVE_HIGH>;
> > gpio-hog;
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko@...tura.hr
Web: www.sartura.hr
Powered by blists - more mailing lists