Message-ID: <CAKMK7uHd7Lefc+ZjvuHtrttkQFYDF8XSsKUV2gfGs9=cw1GTKw@mail.gmail.com>
Date:   Thu, 16 Feb 2023 13:49:23 +0100
From:   Daniel Vetter <daniel@...ll.ch>
To:     neil.armstrong@...aro.org
Cc:     Konrad Dybcio <konrad.dybcio@...aro.org>,
        linux-arm-msm@...r.kernel.org, andersson@...nel.org,
        agross@...nel.org, krzysztof.kozlowski@...aro.org,
        marijn.suijten@...ainline.org,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Sam Ravnborg <sam@...nborg.org>,
        David Airlie <airlied@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/2] gpu/drm/panel: Add Sony TD4353 JDI panel driver

On Thu, 16 Feb 2023 at 13:47, Neil Armstrong <neil.armstrong@...aro.org> wrote:
>
> On 16/02/2023 13:32, Daniel Vetter wrote:
> > On Thu, 16 Feb 2023 at 12:59, Konrad Dybcio <konrad.dybcio@...aro.org> wrote:
> >>
> >>
> >>
> >> On 19.01.2023 17:32, Konrad Dybcio wrote:
> >>> From: Konrad Dybcio <konrad.dybcio@...ainline.org>
> >>>
> >>> Add support for the Sony TD4353 JDI 2160x1080 display panel used in
> >>> some Sony Xperia XZ2 and XZ2 Compact smartphones. Due to the specifics
> >>> of smartphone manufacturing, it is impossible to retrieve a better name
> >>> for this panel.
> >>>
> >>> This revision adds support for the default 60 Hz configuration, however
> >>> there could possibly be some room for expansion, as the display panels
> >>> used on Sony devices have historically been capable of >2x refresh rate
> >>> overclocking.
> >>>
> >>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
> >>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> >>> Reviewed-by: Marijn Suijten <marijn.suijten@...ainline.org>
> >>> ---
> >> Are there any outstanding issues with this driver, or perhaps I did
> >> not CC some important list? It has gotten very little activity ever
> >> since its initial submission around Sept'22..
> >
> > Sam is usually picking up panel drivers these days, but maybe we need
> > a bit more help in this area? If anyone from linaro has a handful of
> > drm patches landed in upstream they could apply for drm-misc commit
> > rights and help push these. I think linaro has lost a few of the
> > drm-misc committers so things tend to be stuck a bit more :-/
>
> I usually wait for Sam to comment before applying my panel patches drivers to drm-misc-next,
> but yeah panels would need some more help...
>
> If needed I can add myself to the panel drivers maintainance aswell.

I think that would be great, maybe just send out the MAINTAINERS patch
and ask Sam to ack?
-Daniel

>
> Neil
>
> > -Daniel
> >
> >>
> >> Konrad
> >>> v3 -> v4:
> >>> - De-magicize some numbers
> >>> - Pick up rb
> >>>   drivers/gpu/drm/panel/Kconfig                 |  10 +
> >>>   drivers/gpu/drm/panel/Makefile                |   1 +
> >>>   drivers/gpu/drm/panel/panel-sony-td4353-jdi.c | 329 ++++++++++++++++++
> >>>   3 files changed, 340 insertions(+)
> >>>   create mode 100644 drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
> >>>
> >>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> >>> index d03a64155d15..8da741f1c2ba 100644
> >>> --- a/drivers/gpu/drm/panel/Kconfig
> >>> +++ b/drivers/gpu/drm/panel/Kconfig
> >>> @@ -677,6 +677,16 @@ config DRM_PANEL_SONY_ACX565AKM
> >>>          Say Y here if you want to enable support for the Sony ACX565AKM
> >>>          800x600 3.5" panel (found on the Nokia N900).
> >>>
> >>> +config DRM_PANEL_SONY_TD4353_JDI
> >>> +     tristate "Sony TD4353 JDI panel"
> >>> +     depends on GPIOLIB && OF
> >>> +     depends on DRM_MIPI_DSI
> >>> +     depends on BACKLIGHT_CLASS_DEVICE
> >>> +     help
> >>> +       Say Y here if you want to enable support for the Sony Tama
> >>> +       TD4353 JDI command mode panel as found on some Sony Xperia
> >>> +       XZ2 and XZ2 Compact smartphones.
> >>> +
> >>>   config DRM_PANEL_SONY_TULIP_TRULY_NT35521
> >>>        tristate "Sony Tulip Truly NT35521 panel"
> >>>        depends on GPIOLIB && OF
> >>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> >>> index 1630dd0c69ae..22155d62bec0 100644
> >>> --- a/drivers/gpu/drm/panel/Makefile
> >>> +++ b/drivers/gpu/drm/panel/Makefile
> >>> @@ -68,6 +68,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
> >>>   obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
> >>>   obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> >>>   obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
> >>> +obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
> >>>   obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
> >>>   obj-$(CONFIG_DRM_PANEL_SONY_SYNAPTICS_JDI) += panel-sony-synaptics-jdi.o
> >>>   obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
> >>> diff --git a/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
> >>> new file mode 100644
> >>> index 000000000000..8d8813dbaa45
> >>> --- /dev/null
> >>> +++ b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
> >>> @@ -0,0 +1,329 @@
> >>> +// SPDX-License-Identifier: GPL-2.0-only
> >>> +/*
> >>> + * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@...ainline.org>
> >>> + *
> >>> + * Generated with linux-mdss-dsi-panel-driver-generator with a
> >>> + * substantial amount of manual adjustments.
> >>> + *
> >>> + * SONY Downstream kernel calls this one:
> >>> + * - "JDI ID3" for Akari  (XZ2)
> >>> + * - "JDI ID4" for Apollo (XZ2 Compact)
> >>> + */
> >>> +
> >>> +#include <linux/delay.h>
> >>> +#include <linux/gpio/consumer.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/of.h>
> >>> +#include <linux/of_device.h>
> >>> +#include <linux/regulator/consumer.h>
> >>> +
> >>> +#include <video/mipi_display.h>
> >>> +
> >>> +#include <drm/drm_mipi_dsi.h>
> >>> +#include <drm/drm_modes.h>
> >>> +#include <drm/drm_panel.h>
> >>> +
> >>> +enum {
> >>> +     TYPE_TAMA_60HZ,
> >>> +     /*
> >>> +      * Leaving room for expansion - SONY very often uses
> >>> +      * *truly reliably* overclockable panels on their flagships!
> >>> +      */
> >>> +};
> >>> +
> >>> +struct sony_td4353_jdi {
> >>> +     struct drm_panel panel;
> >>> +     struct mipi_dsi_device *dsi;
> >>> +     struct regulator_bulk_data supplies[3];
> >>> +     struct gpio_desc *panel_reset_gpio;
> >>> +     struct gpio_desc *touch_reset_gpio;
> >>> +     bool prepared;
> >>> +     int type;
> >>> +};
> >>> +
> >>> +static inline struct sony_td4353_jdi *to_sony_td4353_jdi(struct drm_panel *panel)
> >>> +{
> >>> +     return container_of(panel, struct sony_td4353_jdi, panel);
> >>> +}
> >>> +
> >>> +static int sony_td4353_jdi_on(struct sony_td4353_jdi *ctx)
> >>> +{
> >>> +     struct mipi_dsi_device *dsi = ctx->dsi;
> >>> +     struct device *dev = &dsi->dev;
> >>> +     int ret;
> >>> +
> >>> +     dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 1080 - 1);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set column address: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 2160 - 1);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set page address: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set tear scanline: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set tear on: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set pixel format: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PARTIAL_ROWS,
> >>> +                       0x00, 0x00, 0x08, 0x6f);
> >>> +
> >>> +     ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +     msleep(70);
> >>> +
> >>> +     mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_display_on(dsi);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to turn display on: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static int sony_td4353_jdi_off(struct sony_td4353_jdi *ctx)
> >>> +{
> >>> +     struct mipi_dsi_device *dsi = ctx->dsi;
> >>> +     struct device *dev = &dsi->dev;
> >>> +     int ret;
> >>> +
> >>> +     dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_display_off(dsi);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set display off: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +     msleep(22);
> >>> +
> >>> +     ret = mipi_dsi_dcs_set_tear_off(dsi);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to set tear off: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +     msleep(80);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static void sony_td4353_assert_reset_gpios(struct sony_td4353_jdi *ctx, int mode)
> >>> +{
> >>> +     gpiod_set_value_cansleep(ctx->touch_reset_gpio, mode);
> >>> +     gpiod_set_value_cansleep(ctx->panel_reset_gpio, mode);
> >>> +     usleep_range(5000, 5100);
> >>> +}
> >>> +
> >>> +static int sony_td4353_jdi_prepare(struct drm_panel *panel)
> >>> +{
> >>> +     struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
> >>> +     struct device *dev = &ctx->dsi->dev;
> >>> +     int ret;
> >>> +
> >>> +     if (ctx->prepared)
> >>> +             return 0;
> >>> +
> >>> +     ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to enable regulators: %d\n", ret);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     msleep(100);
> >>> +
> >>> +     sony_td4353_assert_reset_gpios(ctx, 1);
> >>> +
> >>> +     ret = sony_td4353_jdi_on(ctx);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to power on panel: %d\n", ret);
> >>> +             sony_td4353_assert_reset_gpios(ctx, 0);
> >>> +             regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     ctx->prepared = true;
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static int sony_td4353_jdi_unprepare(struct drm_panel *panel)
> >>> +{
> >>> +     struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
> >>> +     struct device *dev = &ctx->dsi->dev;
> >>> +     int ret;
> >>> +
> >>> +     if (!ctx->prepared)
> >>> +             return 0;
> >>> +
> >>> +     ret = sony_td4353_jdi_off(ctx);
> >>> +     if (ret < 0)
> >>> +             dev_err(dev, "Failed to power off panel: %d\n", ret);
> >>> +
> >>> +     sony_td4353_assert_reset_gpios(ctx, 0);
> >>> +     regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> >>> +
> >>> +     ctx->prepared = false;
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static const struct drm_display_mode sony_td4353_jdi_mode_tama_60hz = {
> >>> +     .clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000,
> >>> +     .hdisplay = 1080,
> >>> +     .hsync_start = 1080 + 4,
> >>> +     .hsync_end = 1080 + 4 + 8,
> >>> +     .htotal = 1080 + 4 + 8 + 8,
> >>> +     .vdisplay = 2160,
> >>> +     .vsync_start = 2160 + 259,
> >>> +     .vsync_end = 2160 + 259 + 8,
> >>> +     .vtotal = 2160 + 259 + 8 + 8,
> >>> +     .width_mm = 64,
> >>> +     .height_mm = 128,
> >>> +};
> >>> +
> >>> +static int sony_td4353_jdi_get_modes(struct drm_panel *panel,
> >>> +                                struct drm_connector *connector)
> >>> +{
> >>> +     struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
> >>> +     struct drm_display_mode *mode = NULL;
> >>> +
> >>> +     if (ctx->type == TYPE_TAMA_60HZ)
> >>> +             mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_tama_60hz);
> >>> +     else
> >>> +             return -EINVAL;
> >>> +
> >>> +     if (!mode)
> >>> +             return -ENOMEM;
> >>> +
> >>> +     drm_mode_set_name(mode);
> >>> +
> >>> +     mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> >>> +     connector->display_info.width_mm = mode->width_mm;
> >>> +     connector->display_info.height_mm = mode->height_mm;
> >>> +     drm_mode_probed_add(connector, mode);
> >>> +
> >>> +     return 1;
> >>> +}
> >>> +
> >>> +static const struct drm_panel_funcs sony_td4353_jdi_panel_funcs = {
> >>> +     .prepare = sony_td4353_jdi_prepare,
> >>> +     .unprepare = sony_td4353_jdi_unprepare,
> >>> +     .get_modes = sony_td4353_jdi_get_modes,
> >>> +};
> >>> +
> >>> +static int sony_td4353_jdi_probe(struct mipi_dsi_device *dsi)
> >>> +{
> >>> +     struct device *dev = &dsi->dev;
> >>> +     struct sony_td4353_jdi *ctx;
> >>> +     int ret;
> >>> +
> >>> +     ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> >>> +     if (!ctx)
> >>> +             return -ENOMEM;
> >>> +
> >>> +     ctx->type = (uintptr_t)of_device_get_match_data(dev);
> >>> +
> >>> +     ctx->supplies[0].supply = "vddio";
> >>> +     ctx->supplies[1].supply = "vsp";
> >>> +     ctx->supplies[2].supply = "vsn";
> >>> +     ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> >>> +                                   ctx->supplies);
> >>> +     if (ret < 0)
> >>> +             return dev_err_probe(dev, ret, "Failed to get regulators\n");
> >>> +
> >>> +     ctx->panel_reset_gpio = devm_gpiod_get(dev, "panel-reset", GPIOD_ASIS);
> >>> +     if (IS_ERR(ctx->panel_reset_gpio))
> >>> +             return dev_err_probe(dev, PTR_ERR(ctx->panel_reset_gpio),
> >>> +                                  "Failed to get panel-reset-gpios\n");
> >>> +
> >>> +     ctx->touch_reset_gpio = devm_gpiod_get(dev, "touch-reset", GPIOD_ASIS);
> >>> +     if (IS_ERR(ctx->touch_reset_gpio))
> >>> +             return dev_err_probe(dev, PTR_ERR(ctx->touch_reset_gpio),
> >>> +                                  "Failed to get touch-reset-gpios\n");
> >>> +
> >>> +     ctx->dsi = dsi;
> >>> +     mipi_dsi_set_drvdata(dsi, ctx);
> >>> +
> >>> +     dsi->lanes = 4;
> >>> +     dsi->format = MIPI_DSI_FMT_RGB888;
> >>> +     dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
> >>> +
> >>> +     drm_panel_init(&ctx->panel, dev, &sony_td4353_jdi_panel_funcs,
> >>> +                    DRM_MODE_CONNECTOR_DSI);
> >>> +
> >>> +     ret = drm_panel_of_backlight(&ctx->panel);
> >>> +     if (ret)
> >>> +             return dev_err_probe(dev, ret, "Failed to get backlight\n");
> >>> +
> >>> +     drm_panel_add(&ctx->panel);
> >>> +
> >>> +     ret = mipi_dsi_attach(dsi);
> >>> +     if (ret < 0) {
> >>> +             dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> >>> +             drm_panel_remove(&ctx->panel);
> >>> +             return ret;
> >>> +     }
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static void sony_td4353_jdi_remove(struct mipi_dsi_device *dsi)
> >>> +{
> >>> +     struct sony_td4353_jdi *ctx = mipi_dsi_get_drvdata(dsi);
> >>> +     int ret;
> >>> +
> >>> +     ret = mipi_dsi_detach(dsi);
> >>> +     if (ret < 0)
> >>> +             dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
> >>> +
> >>> +     drm_panel_remove(&ctx->panel);
> >>> +}
> >>> +
> >>> +static const struct of_device_id sony_td4353_jdi_of_match[] = {
> >>> +     { .compatible = "sony,td4353-jdi-tama", .data = (void *)TYPE_TAMA_60HZ },
> >>> +     { /* sentinel */ }
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, sony_td4353_jdi_of_match);
> >>> +
> >>> +static struct mipi_dsi_driver sony_td4353_jdi_driver = {
> >>> +     .probe = sony_td4353_jdi_probe,
> >>> +     .remove = sony_td4353_jdi_remove,
> >>> +     .driver = {
> >>> +             .name = "panel-sony-td4353-jdi",
> >>> +             .of_match_table = sony_td4353_jdi_of_match,
> >>> +     },
> >>> +};
> >>> +module_mipi_dsi_driver(sony_td4353_jdi_driver);
> >>> +
> >>> +MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@...ainline.org>");
> >>> +MODULE_DESCRIPTION("DRM panel driver for SONY Xperia XZ2/XZ2c JDI panel");
> >>> +MODULE_LICENSE("GPL");
> >
> >
> >
>


-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

Powered by blists - more mailing lists