lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230216140747.445477-3-tomi.valkeinen@ideasonboard.com>
Date:   Thu, 16 Feb 2023 16:07:41 +0200
From:   Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To:     linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Wolfram Sang <wsa@...nel.org>,
        Luca Ceresoli <luca.ceresoli@...tlin.com>,
        Andy Shevchenko <andriy.shevchenko@...el.com>,
        Matti Vaittinen <Matti.Vaittinen@...rohmeurope.com>,
        Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Cc:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Peter Rosin <peda@...ntia.se>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Michael Tretter <m.tretter@...gutronix.de>,
        Shawn Tu <shawnx.tu@...el.com>,
        Hans Verkuil <hverkuil@...all.nl>,
        Mike Pagano <mpagano@...too.org>,
        Krzysztof HaƂasa <khalasa@...p.pl>,
        Marek Vasut <marex@...x.de>,
        Satish Nagireddy <satish.nagireddy@...cruise.com>,
        Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH v9 2/8] media: subdev: Split V4L2_SUBDEV_ROUTING_NO_STREAM_MIX

V4L2_SUBDEV_ROUTING_NO_STREAM_MIX routing validation flag means that all
routes from a sink pad must go to the same source pad and all routes
going to the same source pad must originate from the same sink pad.

This does not cover all use cases. For example, if a device routes
all streams from a single sink pad to any of the source pads, but
streams from multiple sink pads can go to the same source pad, the
current flag is too restrictive.

Split the flag into two parts, V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX
and V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX, which add the restriction
only on one side of the device. Together they mean the same as
V4L2_SUBDEV_ROUTING_NO_STREAM_MIX.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
 drivers/media/v4l2-core/v4l2-subdev.c | 17 +++++++++++++----
 include/media/v4l2-subdev.h           | 16 +++++++++++++---
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
index dd3c2d86f96e..e513b859a7df 100644
--- a/drivers/media/v4l2-core/v4l2-subdev.c
+++ b/drivers/media/v4l2-core/v4l2-subdev.c
@@ -1661,10 +1661,11 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,
 		}
 
 		/*
-		 * V4L2_SUBDEV_ROUTING_NO_STREAM_MIX: Streams on the same pad
-		 * may not be routed to streams on different pads.
+		 * V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX: Streams on the same
+		 * sink pad may not be routed to streams on different source
+		 * pads.
 		 */
-		if (disallow & V4L2_SUBDEV_ROUTING_NO_STREAM_MIX) {
+		if (disallow & V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX) {
 			if (remote_pads[route->sink_pad] != U32_MAX &&
 			    remote_pads[route->sink_pad] != route->source_pad) {
 				dev_dbg(sd->dev,
@@ -1673,6 +1674,15 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,
 				goto out;
 			}
 
+			remote_pads[route->sink_pad] = route->source_pad;
+		}
+
+		/*
+		 * V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX: Streams on the same
+		 * source pad may not be routed to streams on different sink
+		 * pads.
+		 */
+		if (disallow & V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX) {
 			if (remote_pads[route->source_pad] != U32_MAX &&
 			    remote_pads[route->source_pad] != route->sink_pad) {
 				dev_dbg(sd->dev,
@@ -1681,7 +1691,6 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd,
 				goto out;
 			}
 
-			remote_pads[route->sink_pad] = route->source_pad;
 			remote_pads[route->source_pad] = route->sink_pad;
 		}
 
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 6a77aa9bb1da..f11103122e53 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -1638,19 +1638,29 @@ u64 v4l2_subdev_state_xlate_streams(const struct v4l2_subdev_state *state,
  * @V4L2_SUBDEV_ROUTING_NO_N_TO_1:
  *	multiple input streams may not be routed to the same output stream
  *	(stream merging)
- * @V4L2_SUBDEV_ROUTING_NO_STREAM_MIX:
- *	streams on the same pad may not be routed to streams on different pads
+ * @V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX:
+ *	streams on the same sink pad may not be routed to streams on different
+ *	source pads
+ * @V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX:
+ *	streams on the same source pad may not be routed to streams on different
+ *	sink pads
  * @V4L2_SUBDEV_ROUTING_ONLY_1_TO_1:
  *	only non-overlapping 1-to-1 stream routing is allowed (a combination of
  *	@V4L2_SUBDEV_ROUTING_NO_1_TO_N and @V4L2_SUBDEV_ROUTING_NO_N_TO_1)
+ * @V4L2_SUBDEV_ROUTING_NO_STREAM_MIX:
+ *	streams on the same pad may not be routed to streams on different pads
  */
 enum v4l2_subdev_routing_restriction {
 	V4L2_SUBDEV_ROUTING_NO_1_TO_N = BIT(0),
 	V4L2_SUBDEV_ROUTING_NO_N_TO_1 = BIT(1),
-	V4L2_SUBDEV_ROUTING_NO_STREAM_MIX = BIT(2),
+	V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX = BIT(2),
+	V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX = BIT(3),
 	V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 =
 		V4L2_SUBDEV_ROUTING_NO_1_TO_N |
 		V4L2_SUBDEV_ROUTING_NO_N_TO_1,
+	V4L2_SUBDEV_ROUTING_NO_STREAM_MIX =
+		V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX |
+		V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX,
 };
 
 /**
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ