[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <69f4a50b-9566-f892-f1b2-831cf20c6938@linaro.org>
Date: Fri, 17 Feb 2023 21:51:35 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, andersson@...nel.org,
agross@...nel.org
Cc: marijn.suijten@...ainline.org, Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>,
Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Akhil P Oommen <quic_akhilpo@...cinc.com>,
Chia-I Wu <olvaffe@...il.com>,
Douglas Anderson <dianders@...omium.org>,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 02/14] drm/msm/a6xx: Extend UBWC config
On 17.02.2023 21:46, Dmitry Baryshkov wrote:
> On 14/02/2023 19:31, Konrad Dybcio wrote:
>> Port setting min_access_length, ubwc_mode and upper_bit from downstream.
>> Values were validated using downstream device trees for SM8[123]50 and
>> left default (as per downstream) elsewhere.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>> ---
>> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 29 +++++++++++++++++++--------
>> 1 file changed, 21 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> index c5f5d0bb3fdc..8855d798bbb3 100644
>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> @@ -786,17 +786,25 @@ static void a6xx_set_cp_protect(struct msm_gpu *gpu)
>> static void a6xx_set_ubwc_config(struct msm_gpu *gpu)
>> {
>> struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>> - u32 lower_bit = 2;
>> + u32 lower_bit = 1;
>
> Any reason to change the default value here?
> If it is to match chipsets you are adding, it might be worth splitting this change to that patch.
Not really now that I think about it, especially since the
correct default value should be zero:
-- part of msm-4.19 --
bit = adreno_dev->highest_bank_bit ? adreno_dev->highest_bank_bit - 13 : 0;
lower_bit = bit & 0x3;
upper_bit = (bit >> 0x2) & 1;
where adreno_dev->highest_bank_bit is read from the dt property
"qcom,highest-bank-bit"
Anyway, I should be able to verify it for all the SoCs which
we support.
Konrad
>
>> + u32 upper_bit = 0;
>> u32 amsbc = 0;
>> u32 rgb565_predicator = 0;
>> u32 uavflagprd_inv = 0;
>> + u32 min_acc_len = 0;
>> + u32 ubwc_mode = 0;
>> /* a618 is using the hw default values */
>> if (adreno_is_a618(adreno_gpu))
>> return;
>> - if (adreno_is_a640_family(adreno_gpu))
>> + if (adreno_is_a630(adreno_gpu))
>> + lower_bit = 2;
>> +
>> + if (adreno_is_a640_family(adreno_gpu)) {
>> amsbc = 1;
>> + lower_bit = 2;
>> + }
>> if (adreno_is_a650(adreno_gpu) || adreno_is_a660(adreno_gpu)) {
>> /* TODO: get ddr type from bootloader and use 2 for LPDDR4 */
>> @@ -807,18 +815,23 @@ static void a6xx_set_ubwc_config(struct msm_gpu *gpu)
>> }
>> if (adreno_is_7c3(adreno_gpu)) {
>> - lower_bit = 1;
>> amsbc = 1;
>> rgb565_predicator = 1;
>> uavflagprd_inv = 2;
>> }
>> gpu_write(gpu, REG_A6XX_RB_NC_MODE_CNTL,
>> - rgb565_predicator << 11 | amsbc << 4 | lower_bit << 1);
>> - gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, lower_bit << 1);
>> - gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL,
>> - uavflagprd_inv << 4 | lower_bit << 1);
>> - gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, lower_bit << 21);
>> + rgb565_predicator << 11 | upper_bit << 10 | amsbc << 4 |
>> + min_acc_len << 3 | lower_bit << 1 | ubwc_mode);
>> +
>> + gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, upper_bit << 4 |
>> + min_acc_len << 3 | lower_bit << 1 | ubwc_mode);
>> +
>> + gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL, upper_bit << 10 |
>> + uavflagprd_inv << 4 | min_acc_len << 3 |
>> + lower_bit << 1 | ubwc_mode);
>> +
>> + gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, min_acc_len << 23 | lower_bit << 21);
>> }
>> static int a6xx_cp_init(struct msm_gpu *gpu)
>
Powered by blists - more mailing lists