Message-ID: <TYZPR06MB52741EB5CD43327A877CA20FF2A69@TYZPR06MB5274.apcprd06.prod.outlook.com>
Date:   Sat, 18 Feb 2023 01:19:51 +0000
From:   Ryan Chen <ryan_chen@...eedtech.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Joel Stanley <joel@....id.au>,
        Andrew Jeffery <andrew@...id.au>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        "openbmc@...ts.ozlabs.org" <openbmc@...ts.ozlabs.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-aspeed@...ts.ozlabs.org" <linux-aspeed@...ts.ozlabs.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v4 2/3] dt-bindings: i2c-ast2600: Add support for AST2600
 i2C driver

Hello Krzysztof,


> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> Sent: Friday, February 17, 2023 4:37 PM
> To: Ryan Chen <ryan_chen@...eedtech.com>; Rob Herring
> <robh+dt@...nel.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@...aro.org>; Joel Stanley <joel@....id.au>; Andrew
> Jeffery <andrew@...id.au>; Philipp Zabel <p.zabel@...gutronix.de>;
> openbmc@...ts.ozlabs.org; linux-arm-kernel@...ts.infradead.org;
> linux-aspeed@...ts.ozlabs.org; linux-kernel@...r.kernel.org
> Subject: Re: [PATCH v4 2/3] dt-bindings: i2c-ast2600: Add support for AST2600
> i2C driver
> 
> On 16/02/2023 10:26, Ryan Chen wrote:
> > Hello Krzysztof
> >
> >> -----Original Message-----
> >> From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> >> Sent: Thursday, February 16, 2023 5:22 PM
> >> To: Ryan Chen <ryan_chen@...eedtech.com>; Rob Herring
> >> <robh+dt@...nel.org>; Krzysztof Kozlowski
> >> <krzysztof.kozlowski+dt@...aro.org>; Joel Stanley <joel@....id.au>;
> >> Andrew Jeffery <andrew@...id.au>; Philipp Zabel
> >> <p.zabel@...gutronix.de>; openbmc@...ts.ozlabs.org;
> >> linux-arm-kernel@...ts.infradead.org;
> >> linux-aspeed@...ts.ozlabs.org; linux-kernel@...r.kernel.org
> >> Subject: Re: [PATCH v4 2/3] dt-bindings: i2c-ast2600: Add support for
> >> AST2600 i2C driver
> >>
> >> On 16/02/2023 10:20, Ryan Chen wrote:
> >>> Hello Krzysztof
> >>>
> >>>> -----Original Message-----
> >>>> From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> >>>> Sent: Thursday, February 16, 2023 4:18 AM
> >>>> To: Ryan Chen <ryan_chen@...eedtech.com>; Rob Herring
> >>>> <robh+dt@...nel.org>; Krzysztof Kozlowski
> >>>> <krzysztof.kozlowski+dt@...aro.org>; Joel Stanley <joel@....id.au>;
> >>>> Andrew Jeffery <andrew@...id.au>; Philipp Zabel
> >>>> <p.zabel@...gutronix.de>; openbmc@...ts.ozlabs.org;
> >>>> linux-arm-kernel@...ts.infradead.org;
> >>>> linux-aspeed@...ts.ozlabs.org; linux-kernel@...r.kernel.org
> >>>> Subject: Re: [PATCH v4 2/3] dt-bindings: i2c-ast2600: Add support
> >>>> for
> >>>> AST2600 i2C driver
> >>>>
> >>>> On 15/02/2023 06:43, Ryan Chen wrote:
> >>>>>>> +  - $ref: /schemas/i2c/i2c-controller.yaml#
> >>>>>>> +
> >>>>>>> +properties:
> >>>>>>> +  compatible:
> >>>>>>> +    enum:
> >>>>>>> +      - aspeed,ast2600-i2c
> >>>>>>
> >>>>>> NAK. It's already there. Please do not waste our time in
> >>>>>> submitting duplicated drivers.
> >>>>>
> >>>>> It is not duplicated, as my description in cover " This series add
> >>>>> AST2600 i2c
> >>>> new register set driver"
> >>>>> So, this will be different driver compatible.
> >>>>> The original compatible is
> >>>>>       - aspeed,ast2400-i2c-bus
> >>>>>       - aspeed,ast2500-i2c-bus
> >>>>>       - aspeed,ast2600-i2c-bus
> >>>>> So the new register set compatible is "- aspeed,ast2600-i2c",
> >>>>> remove
> >> "bus".
> >>>>
> >>>> Bindings are documenting hardware, so I claim - we already have
> >>>> this hardware described and this is duplicated. Otherwise - what
> >>>> are these two I2C controllers and what are the differences? Why
> >>>> they do not have really different name? Bus looks more like a
> >>>> mistake than a
> >> differentiating name.
> >>> For misunderstanding, or mistaken.
> >>> I purpose to be aspeed,ast2600-i2cv2, will it more clear way ?
> >>
> >> I don't know. I still did not get answers. I asked here several questions.
> > Those are different i2c controller, as I description in cover letter.
> 
> The cover letter does not explain here anything. It barely mentions "new
> register set" and "separate register set". This is really short, so without proper
> explanations you will get all these questions. Are they compatible? Do they
> overlap? Are they completely different? If so, why datasheet uses same name
> for them? So many questions but cover letter is basically two sentences and
> here:

Sorry my misunderstanding.
The legacy register layout is mix master/slave register control together.
So will let confuse about register.
The following is add more detail description about new register layout.
And new feature set add for register.

-Add new clock divider option for more flexible and accurate clock rate generation
-Add tCKHighMin timing to guarantee SCL high pulse width.
-Add support dual pool buffer mode, split 32 bytes pool buffer of each device into 2 x 16 bytes for Tx and Rx individually.
-Increase DMA buffer size to 4096 bytes and support byte alignment.
-Re-define the base address of BUS1 ~ BUS16 and Pool buffer.
-Re-define registers for separating master and slave mode control.
-Support 4 individual DMA buffers for master Tx and Rx, slave Tx and Rx.

And following is new register set for package transfer sequence.
New Master operation mode: S -> Aw -> P {S: Start, Sr: Repeat Start, Aw/r: Address for write/read, P: Stop}.
New Master operation mode: S -> Aw -> TxD -> P
New Master operation mode: S -> Ar -> RxD -> P
New Slave  operation mode: S -> Aw -> RxD -> Sr -> Ar -> TxD -> P.
-Bus SDA lock auto-release capability for new master DMA command mode.
-Bus auto timeout for new master/slave DMA mode.

The following is two versus register layout.
Old:
{I2CD00}: Function Control Register     
{I2CD04}: Clock and AC Timing Control Register \#1  
{I2CD08}: Clock and AC Timing Control Register \#2 
{I2CD0C}: Interrupt Control Register   
{I2CD10}: Interrupt Status Register  
{I2CD14}: Command/Status Register     
{I2CD18}: Slave Device Address Register   
{I2CD1C}: Pool Buffer Control Register   
{I2CD20}: Transmit/Receive Byte Buffer Register 
{I2CD24}: DMA Mode Buffer Address Register  
{I2CD28}: DMA Transfer Length Register 
{I2CD2C}: Original DMA Mode Buffer Address Setting     
{I2CD30}: Original DMA Transfer Length Setting and Final Status  

New Register mode 
{I2CC00}: Master/Slave Function Control Register    
{I2CC04}: Master/Slave Clock and AC Timing Control Register  
{I2CC08}: Master/Slave Transmit/Receive Byte Buffer Register    
{I2CC0C}: Master/Slave Pool Buffer Control Register   
{I2CM10}: Master Interrupt Control Register       
{I2CM14}: Master Interrupt Status Register   
{I2CM18}: Master Command/Status Register 
{I2CM1C}: Master DMA Buffer Length Register   
{I2CS20}: Slave~ Interrupt Control Register        
{I2CS24}: Slave~ Interrupt Status Register          
{I2CS28}: Slave~ Command/Status Register          
{I2CS2C}: Slave~ DMA Buffer Length Register          
{I2CM30}: Master DMA Mode Tx Buffer Base Address     
{I2CM34}: Master DMA Mode Rx Buffer Base Address        
{I2CS38}: Slave~ DMA Mode Tx Buffer Base Address           
{I2CS3C}: Slave~ DMA Mode Rx Buffer Base Address        
{I2CS40}: Slave Device Address Register                  
{I2CM48}: Master DMA Length Status Register                 
{I2CS4C}: Slave  DMA Length Status Register              
{I2CC50}: Current DMA Operating Address Status           
{I2CC54}: Current DMA Operating Length  Status     

Sorry Krzysztof, I will add those in cover letter, it will more clear picture for review.
Thanks a lot.

> > The i2c new register mode, there have two separate slave/master register.
> > And different register with old register.
> 
> you repeat the same.
> 
> > So now, avoid misunderstanding, or mistaken.
> > I purpose to be aspeed,ast2600-i2cv2.
> 
> 
> Best regards,
> Krzysztof

Powered by blists - more mailing lists