| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230219143657.241542-4-daniel.lezcano@linaro.org>
Date: Sun, 19 Feb 2023 15:36:43 +0100
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: rafael@...nel.org, daniel.lezcano@...aro.org
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
Miquel Raynal <miquel.raynal@...tlin.com>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Markus Mayer <mmayer@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Heiko Stuebner <heiko@...ech.de>,
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM7XXX
ARM ARCHITECTURE),
linux-rockchip@...ts.infradead.org (open list:ARM/Rockchip SoC support)
Subject: [PATCH v1 03/17] thermal: Remove debug or error messages in get_temp() ops
Some get_temp() ops implementation are showing an error or a debug
message if the reading of the sensor fails.
The debug message is already displayed from the call site of this
ops. So we can remove it.
On the other side, the error should not be displayed because in
production that can raise tons of messages.
Finally, some drivers are showing a debug message with the
temperature, this is also accessible through the trace from the core
code in the temperature_update() function.
Another benefit is the dev_* messages are accessing the thermal zone
device field from the structure, so we encapsulate even more the code
by preventing these accesses.
Remove those messages.
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
drivers/thermal/armada_thermal.c | 10 ++--------
drivers/thermal/broadcom/brcmstb_thermal.c | 4 +---
drivers/thermal/dove_thermal.c | 5 +----
drivers/thermal/hisi_thermal.c | 3 ---
drivers/thermal/imx_sc_thermal.c | 5 +----
drivers/thermal/imx_thermal.c | 4 +---
drivers/thermal/kirkwood_thermal.c | 5 +----
drivers/thermal/max77620_thermal.c | 4 +---
drivers/thermal/rockchip_thermal.c | 3 ---
drivers/thermal/st/st_thermal.c | 2 --
drivers/thermal/thermal-generic-adc.c | 5 ++---
11 files changed, 10 insertions(+), 40 deletions(-)
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 82d3e15d51f6..9bbebde09dc4 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -360,11 +360,8 @@ static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
* we must absolutely wait for the sensor validity bit to ensure we read
* actual data.
*/
- if (armada_wait_sensor_validity(priv)) {
- dev_err(priv->dev,
- "Temperature sensor reading not valid\n");
+ if (armada_wait_sensor_validity(priv))
return -EIO;
- }
return 0;
}
@@ -402,11 +399,8 @@ static int armada_get_temp_legacy(struct thermal_zone_device *thermal,
int ret;
/* Valid check */
- if (!armada_is_valid(priv)) {
- dev_err(priv->dev,
- "Temperature sensor reading not valid\n");
+ if (!armada_is_valid(priv))
return -EIO;
- }
/* Do the actual reading */
ret = armada_read_sensor(priv, temp);
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 668cdc16b108..ae1981506da0 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -158,10 +158,8 @@ static int brcmstb_get_temp(struct thermal_zone_device *tz, int *temp)
val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
- if (!(val & AVS_TMON_STATUS_valid_msk)) {
- dev_err(priv->dev, "reading not valid\n");
+ if (!(val & AVS_TMON_STATUS_valid_msk))
return -EIO;
- }
val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
index ed7d1173d9fd..9cd54740713f 100644
--- a/drivers/thermal/dove_thermal.c
+++ b/drivers/thermal/dove_thermal.c
@@ -91,11 +91,8 @@ static int dove_get_temp(struct thermal_zone_device *thermal,
/* Valid check */
reg = readl_relaxed(priv->control + PMU_TEMP_DIOD_CTRL1_REG);
- if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0) {
- dev_err(&thermal->device,
- "Temperature sensor reading not valid\n");
+ if ((reg & PMU_TDC1_TEMP_VALID_MASK) == 0x0)
return -EIO;
- }
/*
* Calculate temperature. According to Marvell internal
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 043751e6a31d..1e13fe80a9f3 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -436,9 +436,6 @@ static int hisi_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
*temp = data->ops->get_temp(sensor);
- dev_dbg(&data->pdev->dev, "tzd=%p, id=%d, temp=%d, thres=%d\n",
- sensor->tzd, sensor->id, *temp, sensor->thres_temp);
-
return 0;
}
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index ca10d6a68f0f..26102d1c6bde 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -58,11 +58,8 @@ static int imx_sc_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
hdr->size = 2;
ret = imx_scu_call_rpc(thermal_ipc_handle, &msg, true);
- if (ret) {
- dev_err(&sensor->tzd->device, "read temp sensor %d failed, ret %d\n",
- sensor->resource_id, ret);
+ if (ret)
return ret;
- }
*temp = msg.data.resp.celsius * 1000 + msg.data.resp.tenths * 100;
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index c3c14cd26aee..f621b778b0f0 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -265,10 +265,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
regmap_read(map, soc_data->temp_data, &val);
- if ((val & soc_data->temp_valid_mask) == 0) {
- dev_dbg(&tz->device, "temp measurement never finished\n");
+ if ((val & soc_data->temp_valid_mask) == 0)
return -EAGAIN;
- }
n_meas = (val & soc_data->temp_value_mask)
>> soc_data->temp_value_shift;
diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
index 8e39c875ba58..f8c098a262fa 100644
--- a/drivers/thermal/kirkwood_thermal.c
+++ b/drivers/thermal/kirkwood_thermal.c
@@ -33,11 +33,8 @@ static int kirkwood_get_temp(struct thermal_zone_device *thermal,
/* Valid check */
if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
- KIRKWOOD_THERMAL_VALID_MASK)) {
- dev_err(&thermal->device,
- "Temperature sensor reading not valid\n");
+ KIRKWOOD_THERMAL_VALID_MASK))
return -EIO;
- }
/*
* Calculate temperature. According to Marvell internal
diff --git a/drivers/thermal/max77620_thermal.c b/drivers/thermal/max77620_thermal.c
index 05b6e9a2a283..1dad8cb00735 100644
--- a/drivers/thermal/max77620_thermal.c
+++ b/drivers/thermal/max77620_thermal.c
@@ -51,10 +51,8 @@ static int max77620_thermal_read_temp(struct thermal_zone_device *tz, int *temp)
int ret;
ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val);
- if (ret < 0) {
- dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret);
+ if (ret < 0)
return ret;
- }
if (val & MAX77620_IRQ_TJALRM2_MASK)
*temp = MAX77620_TJALARM2_TEMP;
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index dafbdbb7c0c0..bd593ec712ee 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1233,9 +1233,6 @@ static int rockchip_thermal_get_temp(struct thermal_zone_device *tz, int *out_te
retval = tsadc->get_temp(&tsadc->table,
sensor->id, thermal->regs, out_temp);
- dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %d, retval: %d\n",
- sensor->id, *out_temp, retval);
-
return retval;
}
diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index 1009f08e64e3..4d39626a4345 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -127,8 +127,6 @@ static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
temp += sensor->cdata->temp_adjust_val;
temp = mcelsius(temp);
- dev_dbg(dev, "temperature: %d\n", temp);
-
*temperature = temp;
return 0;
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index 8e2ff0df7e64..7f3eda31d0fa 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -59,10 +59,9 @@ static int gadc_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
int ret;
ret = iio_read_channel_processed(gti->channel, &val);
- if (ret < 0) {
- dev_err(gti->dev, "IIO channel read failed %d\n", ret);
+ if (ret < 0)
return ret;
- }
+
*temp = gadc_thermal_adc_to_temp(gti, val);
return 0;
--
2.34.1
Powered by blists - more mailing lists