| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230220094339.47370-1-krzysztof.kozlowski@linaro.org>
Date: Mon, 20 Feb 2023 10:43:38 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 1/2] arm64: dts: qcom: msm8996: move WCD9335 audio codec to boards
The WCD9335 audio codec on Slimbus is a property of a board, not SoC,
thus it should not be present in MSM8996 DTSI. Keep it in specific
boards, so it won't appear incomplete in the boards not having it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 56 +++++++++++++----
.../boot/dts/qcom/msm8996-oneplus-common.dtsi | 56 +++++++++++++----
.../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 60 ++++++++++++++-----
arch/arm64/boot/dts/qcom/msm8996.dtsi | 30 +---------
4 files changed, 135 insertions(+), 67 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index fe6c415e8229..ce189dea2760 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -974,6 +974,50 @@ dai@2 {
};
};
+&slim_msm {
+ status = "okay";
+
+ slim@1 {
+ reg = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ tasha_ifd: tas-ifd@0,0 {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
+ };
+
+ wcd9335: codec@1,0 {
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ slim-ifc-dev = <&tasha_ifd>;
+
+ #sound-dai-cells = <1>;
+
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ };
+ };
+};
+
&sound {
compatible = "qcom,apq8096-sndcard";
model = "DB820c";
@@ -1101,15 +1145,3 @@ &usb3phy {
&venus {
status = "okay";
};
-
-&wcd9335 {
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
-
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-buck-sido-supply = <&vreg_s4a_1p8>;
- vdd-tx-supply = <&vreg_s4a_1p8>;
- vdd-rx-supply = <&vreg_s4a_1p8>;
- vdd-io-supply = <&vreg_s4a_1p8>;
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index 2994337c6046..104deaee74e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -504,6 +504,50 @@ vreg_l32a_1p8: l32 {
};
};
+&slim_msm {
+ status = "okay";
+
+ slim@1 {
+ reg = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ tasha_ifd: tas-ifd@0,0 {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
+ };
+
+ wcd9335: codec@1,0 {
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ slim-ifc-dev = <&tasha_ifd>;
+
+ #sound-dai-cells = <1>;
+
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ };
+ };
+};
+
&slpi_pil {
status = "okay";
};
@@ -772,15 +816,3 @@ &usb3_dwc3 {
&venus {
status = "okay";
};
-
-&wcd9335 {
- clock-names = "mclk", "slimbus";
- clocks = <&div1_mclk>,
- <&rpmcc RPM_SMD_BB_CLK1>;
-
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-buck-sido-supply = <&vreg_s4a_1p8>;
- vdd-tx-supply = <&vreg_s4a_1p8>;
- vdd-rx-supply = <&vreg_s4a_1p8>;
- vdd-io-supply = <&vreg_s4a_1p8>;
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 2acfed28e3cb..446b1d23dec0 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -337,6 +337,52 @@ led@3 {
};
};
+&slim_msm {
+ status = "okay";
+
+ slim@1 {
+ reg = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ tasha_ifd: tas-ifd@0,0 {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
+ };
+
+ wcd9335: codec@1,0 {
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+
+ clock-names = "mclk", "slimbus";
+ clocks = <&divclk1_cdc>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ slim-ifc-dev = <&tasha_ifd>;
+
+ #sound-dai-cells = <1>;
+
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-vbat-supply = <&vph_pwr>;
+ vdd-micbias-supply = <&vph_pwr_bbyp>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+ };
+ };
+};
+
&slpi_pil {
status = "okay";
@@ -395,20 +441,6 @@ &venus {
status = "okay";
};
-&wcd9335 {
- clock-names = "mclk", "slimbus";
- clocks = <&divclk1_cdc>,
- <&rpmcc RPM_SMD_BB_CLK1>;
-
- vdd-buck-supply = <&vreg_s4a_1p8>;
- vdd-buck-sido-supply = <&vreg_s4a_1p8>;
- vdd-rx-supply = <&vreg_s4a_1p8>;
- vdd-tx-supply = <&vreg_s4a_1p8>;
- vdd-vbat-supply = <&vph_pwr>;
- vdd-micbias-supply = <&vph_pwr_bbyp>;
- vdd-io-supply = <&vreg_s4a_1p8>;
-};
-
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm8994-regulators";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6f180a8efe77..dfc7153c9d8a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -3383,36 +3383,8 @@ slim_msm: slim-ngd@...0000 {
dma-names = "rx", "tx";
#address-cells = <1>;
#size-cells = <0>;
- slim@1 {
- reg = <1>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- tasha_ifd: tas-ifd@0,0 {
- compatible = "slim217,1a0";
- reg = <0 0>;
- };
-
- wcd9335: codec@1,0 {
- pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
- pinctrl-names = "default";
-
- compatible = "slim217,1a0";
- reg = <1 0>;
- interrupt-parent = <&tlmm>;
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
- <53 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "intr1", "intr2";
- interrupt-controller;
- #interrupt-cells = <1>;
- reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
-
- slim-ifc-dev = <&tasha_ifd>;
-
- #sound-dai-cells = <1>;
- };
- };
+ status = "disabled";
};
adsp_pil: remoteproc@...0000 {
--
2.34.1
Powered by blists - more mailing lists