linux-kernel - Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-oneplus: add alert-slider

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 Feb 2023 11:17:30 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Gergo Koteles <soyer@....hu>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Jonathan Corbet <corbet@....net>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Jiri Kosina <jikos@...nel.org>,
        Benjamin Tissoires <benjamin.tissoires@...hat.com>
Cc:     linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        Caleb Connolly <caleb@...nolly.tech>
Subject: Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-oneplus: add alert-slider



On 20.02.2023 01:13, Gergo Koteles wrote:
> The alert-slider is a tri-state sound profile switch found on the OnePlus 6,
> Android maps the states to "silent", "vibrate" and "ring". Expose them as
> ABS_SND_PROFILE events.
> The previous GPIO numbers were wrong. Update them to the correct
> ones.
> 
> Co-developed-by: Caleb Connolly <caleb@...nolly.tech>
> Signed-off-by: Caleb Connolly <caleb@...nolly.tech>
> Signed-off-by: Gergo Koteles <soyer@....hu>
> ---
>  .../boot/dts/qcom/sdm845-oneplus-common.dtsi  | 43 ++++++++++++++++++-
>  1 file changed, 41 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> index 64638ea94db7..ff982dd853a9 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> @@ -52,6 +52,45 @@ key-vol-up {
>  		};
>  	};
>  
> +	alert-slider {
This is out of order, alphabetically.

> +		compatible = "gpio-keys";
> +		label = "Alert slider";
> +
> +		pinctrl-0 = <&alert_slider_default>;
> +		pinctrl-names = "default";
> +
> +		switch-top {
> +			label = "Silent";
> +			linux,input-type = <EV_ABS>;
> +			linux,code = <ABS_SND_PROFILE>;
> +			linux,input-value = <SND_PROFILE_SILENT>;
> +			gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <50>;
Is there a reason it can't be the default 5ms, since it should
more or less be a simple input ping to the userspace?

Other than that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
> +			linux,can-disable;
> +		};
> +
> +		switch-middle {
> +			label = "Vibrate";
> +			linux,input-type = <EV_ABS>;
> +			linux,code = <ABS_SND_PROFILE>;
> +			linux,input-value = <SND_PROFILE_VIBRATE>;
> +			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <50>;
> +			linux,can-disable;
> +
> +		};
> +
> +		switch-bottom {
> +			label = "Ring";
> +			linux,input-type = <EV_ABS>;
> +			linux,code = <ABS_SND_PROFILE>;
> +			linux,input-value = <SND_PROFILE_RING>;
> +			gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <50>;
> +			linux,can-disable;
> +		};
> +	};
> +
>  	reserved-memory {
>  		/*
>  		 * The rmtfs_mem needs to be guarded due to "XPU limitations"
> @@ -753,8 +792,8 @@ &usb_1_hsphy {
>  &tlmm {
>  	gpio-reserved-ranges = <0 4>, <81 4>;
>  
> -	tri_state_key_default: tri-state-key-default-state {
> -		pins = "gpio40", "gpio42", "gpio26";
> +	alert_slider_default: alert-slider-default-state {
> +		pins = "gpio126", "gpio52", "gpio24";
>  		function = "gpio";
>  		drive-strength = <2>;
>  		bias-disable;