| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 20 Feb 2023 13:59:03 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Elliot Berman <quic_eberman@...cinc.com>,
Alex Elder <elder@...aro.org>,
Prakruthi Deepak Heragu <quic_pheragu@...cinc.com>,
Jonathan Corbet <corbet@....net>,
Jassi Brar <jassisinghbrar@...il.com>
Cc: Murali Nalajala <quic_mnalajal@...cinc.com>,
Trilok Soni <quic_tsoni@...cinc.com>,
Srivatsa Vaddagiri <quic_svaddagi@...cinc.com>,
Carl van Schaik <quic_cvanscha@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bagas Sanjaya <bagasdotme@...il.com>,
Catalin Marinas <catalin.marinas@....com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v10 07/26] mailbox: Add Gunyah message queue mailbox
On 14/02/2023 21:23, Elliot Berman wrote:
> Gunyah message queues are a unidirectional inter-VM pipe for messages up
> to 1024 bytes. This driver supports pairing a receiver message queue and
> a transmitter message queue to expose a single mailbox channel.
>
> Signed-off-by: Elliot Berman <quic_eberman@...cinc.com>
> ---
> Documentation/virt/gunyah/message-queue.rst | 8 +
> drivers/mailbox/Makefile | 2 +
> drivers/mailbox/gunyah-msgq.c | 214 ++++++++++++++++++++
> include/linux/gunyah.h | 56 +++++
> 4 files changed, 280 insertions(+)
> create mode 100644 drivers/mailbox/gunyah-msgq.c
>
> diff --git a/Documentation/virt/gunyah/message-queue.rst b/Documentation/virt/gunyah/message-queue.rst
> index 0667b3eb1ff9..082085e981e0 100644
> --- a/Documentation/virt/gunyah/message-queue.rst
> +++ b/Documentation/virt/gunyah/message-queue.rst
> @@ -59,3 +59,11 @@ vIRQ: two TX message queues will have two vIRQs (and two capability IDs).
> | | | | | |
> | | | | | |
> +---------------+ +-----------------+ +---------------+
> +
> +Gunyah message queues are exposed as mailboxes. To create the mailbox, create
> +a mbox_client and call `gh_msgq_init`. On receipt of the RX_READY interrupt,
> +all messages in the RX message queue are read and pushed via the `rx_callback`
> +of the registered mbox_client.
> +
> +.. kernel-doc:: drivers/mailbox/gunyah-msgq.c
> + :identifiers: gh_msgq_init
> diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
> index fc9376117111..5f929bb55e9a 100644
> --- a/drivers/mailbox/Makefile
> +++ b/drivers/mailbox/Makefile
> @@ -55,6 +55,8 @@ obj-$(CONFIG_MTK_CMDQ_MBOX) += mtk-cmdq-mailbox.o
>
> obj-$(CONFIG_ZYNQMP_IPI_MBOX) += zynqmp-ipi-mailbox.o
>
> +obj-$(CONFIG_GUNYAH) += gunyah-msgq.o
Why are we reusing CONFIG_GUNYAH Kconfig symbol for mailbox, why not
CONFIG_GUNYAH_MBOX?
> +
> obj-$(CONFIG_SUN6I_MSGBOX) += sun6i-msgbox.o
>
> obj-$(CONFIG_SPRD_MBOX) += sprd-mailbox.o
> diff --git a/drivers/mailbox/gunyah-msgq.c b/drivers/mailbox/gunyah-msgq.c
> new file mode 100644
> index 000000000000..03ffaa30ce9b
> --- /dev/null
> +++ b/drivers/mailbox/gunyah-msgq.c
> @@ -0,0 +1,214 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/mailbox_controller.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gunyah.h>
> +#include <linux/printk.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/wait.h>
...
> +/* Fired when message queue transitions from "full" to "space available" to send messages */
> +static irqreturn_t gh_msgq_tx_irq_handler(int irq, void *data)
> +{
> + struct gh_msgq *msgq = data;
> +
> + mbox_chan_txdone(gh_msgq_chan(msgq), 0);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/* Fired after sending message and hypercall told us there was more space available. */
> +static void gh_msgq_txdone_tasklet(struct tasklet_struct *tasklet)
Tasklets have been long deprecated, consider using workqueues in this
particular case.
> +{
> + struct gh_msgq *msgq = container_of(tasklet, struct gh_msgq, txdone_tasklet);
> +
> + mbox_chan_txdone(gh_msgq_chan(msgq), msgq->last_ret);
> +}
> +
> +static int gh_msgq_send_data(struct mbox_chan *chan, void *data)
> +{
..
> + tasklet_schedule(&msgq->txdone_tasklet);
> +
> + return 0;
> +}
> +
> +static struct mbox_chan_ops gh_msgq_ops = {
> + .send_data = gh_msgq_send_data,
> +};
> +
> +/**
> + * gh_msgq_init() - Initialize a Gunyah message queue with an mbox_client
> + * @parent: optional, device parent used for the mailbox controller
> + * @msgq: Pointer to the gh_msgq to initialize
> + * @cl: A mailbox client to bind to the mailbox channel that the message queue creates
> + * @tx_ghrsc: optional, the transmission side of the message queue
> + * @rx_ghrsc: optional, the receiving side of the message queue
> + *
> + * At least one of tx_ghrsc and rx_ghrsc should be not NULL. Most message queue use cases come with
> + * a pair of message queues to facilitate bidirectional communication. When tx_ghrsc is set,
> + * the client can send messages with mbox_send_message(gh_msgq_chan(msgq), msg). When rx_ghrsc
> + * is set, the mbox_client should register an .rx_callback() and the message queue driver will
> + * push all available messages upon receiving the RX ready interrupt. The messages should be
> + * consumed or copied by the client right away as the gh_msgq_rx_data will be replaced/destroyed
> + * after the callback.
> + *
> + * Returns - 0 on success, negative otherwise
> + */
> +int gh_msgq_init(struct device *parent, struct gh_msgq *msgq, struct mbox_client *cl,
> + struct gunyah_resource *tx_ghrsc, struct gunyah_resource *rx_ghrsc)
> +{
> + int ret;
> +
> + /* Must have at least a tx_ghrsc or rx_ghrsc and that they are the right device types */
> + if ((!tx_ghrsc && !rx_ghrsc) ||
> + (tx_ghrsc && tx_ghrsc->type != GUNYAH_RESOURCE_TYPE_MSGQ_TX) ||
> + (rx_ghrsc && rx_ghrsc->type != GUNYAH_RESOURCE_TYPE_MSGQ_RX))
> + return -EINVAL;
> +
> + if (gh_api_version() != GUNYAH_API_V1) {
> + pr_err("Unrecognized gunyah version: %u. Currently supported: %d\n",
dev_err(parent
would make this more useful
> + gh_api_version(), GUNYAH_API_V1);
> + return -EOPNOTSUPP;
> + }
> +
> + if (!gh_api_has_feature(GH_API_FEATURE_MSGQUEUE))
> + return -EOPNOTSUPP;
> +
> + msgq->tx_ghrsc = tx_ghrsc;
> + msgq->rx_ghrsc = rx_ghrsc;
> +
> + msgq->mbox.dev = parent;
> + msgq->mbox.ops = &gh_msgq_ops;
> + msgq->mbox.num_chans = 1;
> + msgq->mbox.txdone_irq = true;
> + msgq->mbox.chans = kcalloc(msgq->mbox.num_chans, sizeof(*msgq->mbox.chans), GFP_KERNEL);
> + if (!msgq->mbox.chans)
> + return -ENOMEM;
> +
> + if (msgq->tx_ghrsc) {
> + ret = request_irq(msgq->tx_ghrsc->irq, gh_msgq_tx_irq_handler, 0, "gh_msgq_tx",
> + msgq);
> + if (ret)
> + goto err_chans;
> + }
> +
> + if (msgq->rx_ghrsc) {
> + ret = request_threaded_irq(msgq->rx_ghrsc->irq, NULL, gh_msgq_rx_irq_handler,
> + IRQF_ONESHOT, "gh_msgq_rx", msgq);
> + if (ret)
> + goto err_tx_irq;
> + }
> +
> + tasklet_setup(&msgq->txdone_tasklet, gh_msgq_txdone_tasklet);
> +
> + ret = mbox_controller_register(&msgq->mbox);
> + if (ret)
> + goto err_rx_irq;
> +
> + ret = mbox_bind_client(gh_msgq_chan(msgq), cl);
> + if (ret)
> + goto err_mbox;
> +
> + return 0;
> +err_mbox:
> + mbox_controller_unregister(&msgq->mbox);
> +err_rx_irq:
> + if (msgq->rx_ghrsc)
> + free_irq(msgq->rx_ghrsc->irq, msgq);
> +err_tx_irq:
> + if (msgq->tx_ghrsc)
> + free_irq(msgq->tx_ghrsc->irq, msgq);
> +err_chans:
> + kfree(msgq->mbox.chans);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(gh_msgq_init);
> +
> +void gh_msgq_remove(struct gh_msgq *msgq)
> +{
> + mbox_controller_unregister(&msgq->mbox);
> +
> + if (msgq->rx_ghrsc)
> + free_irq(msgq->rx_ghrsc->irq, msgq);
> +
> + if (msgq->tx_ghrsc)
> + free_irq(msgq->tx_ghrsc->irq, msgq);
> +
> + kfree(msgq->mbox.chans);
> +}
> +EXPORT_SYMBOL_GPL(gh_msgq_remove);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Gunyah Message Queue Driver");
Powered by blists - more mailing lists