[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y/Xc9RCmO8P8eKtL@valkosipuli.retiisi.eu>
Date: Wed, 22 Feb 2023 11:14:29 +0200
From: Sakari Ailus <sakari.ailus@....fi>
To: shravan kumar <shravan.chippa@...rochip.com>
Cc: paul.j.murphy@...el.com, daniele.alessandrelli@...el.com,
mchehab@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com,
linux-imx@....com, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Jacopo Mondi <jacopo.mondi@...asonboard.com>,
Conor Dooley <conor.dooley@...rochip.com>,
Prakash Battu <Prakash.Battu@...rochip.com>
Subject: Re: [PATCH v11 3/5] media: i2c: imx334: support lower bandwidth mode
Hi Shravan,
On Wed, Feb 08, 2023 at 10:39:13AM +0530, shravan kumar wrote:
> From: Shravan Chippa <shravan.chippa@...rochip.com>
>
> Some platforms may not be capable of supporting the bandwidth
> required for 12 bit or 3840x2160@60 resolutions.
>
> Add support for dynamically selecting 10 bit and 1920x1080@30
> resolutions while leaving the existing configuration as default.
>
> Reviewed-by: Jacopo Mondi <jacopo.mondi@...asonboard.com>
> CC: Conor Dooley <conor.dooley@...rochip.com>
> Signed-off-by: Prakash Battu <Prakash.Battu@...rochip.com>
> Signed-off-by: Shravan Chippa <shravan.chippa@...rochip.com>
> ---
> drivers/media/i2c/imx334.c | 296 +++++++++++++++++++++++++++++++++----
> 1 file changed, 269 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c
> index 40ece08f20f5..309c706114d2 100644
> --- a/drivers/media/i2c/imx334.c
> +++ b/drivers/media/i2c/imx334.c
> @@ -79,7 +79,6 @@ struct imx334_reg_list {
> * struct imx334_mode - imx334 sensor mode structure
> * @width: Frame width
> * @height: Frame height
> - * @code: Format code
> * @hblank: Horizontal blanking in lines
> * @vblank: Vertical blanking in lines
> * @vblank_min: Minimal vertical blanking in lines
> @@ -91,7 +90,6 @@ struct imx334_reg_list {
> struct imx334_mode {
> u32 width;
> u32 height;
> - u32 code;
> u32 hblank;
> u32 vblank;
> u32 vblank_min;
> @@ -119,6 +117,7 @@ struct imx334_mode {
> * @vblank: Vertical blanking in lines
> * @cur_mode: Pointer to current selected sensor mode
> * @mutex: Mutex for serializing sensor controls
> + * @cur_code: current selected format code
> * @streaming: Flag indicating streaming state
> */
> struct imx334 {
> @@ -140,6 +139,7 @@ struct imx334 {
> u32 vblank;
> const struct imx334_mode *cur_mode;
> struct mutex mutex;
> + u32 cur_code;
> bool streaming;
> };
>
> @@ -147,7 +147,170 @@ static const s64 link_freq[] = {
> IMX334_LINK_FREQ,
> };
>
> -/* Sensor mode registers */
> +/* Sensor mode registers for 1920x1080@...ps */
> +static const struct imx334_reg mode_1920x1080_regs[] = {
> + {0x3000, 0x01},
> + {0x3018, 0x04},
> + {0x3030, 0xca},
> + {0x3031, 0x08},
> + {0x3032, 0x00},
> + {0x3034, 0x4c},
> + {0x3035, 0x04},
> + {0x302c, 0xf0},
> + {0x302d, 0x03},
> + {0x302e, 0x80},
> + {0x302f, 0x07},
> + {0x3074, 0xcc},
> + {0x3075, 0x02},
> + {0x308e, 0xcd},
> + {0x308f, 0x02},
> + {0x3076, 0x38},
> + {0x3077, 0x04},
> + {0x3090, 0x38},
> + {0x3091, 0x04},
> + {0x3308, 0x38},
> + {0x3309, 0x04},
> + {0x30C6, 0x00},
> + {0x30c7, 0x00},
> + {0x30ce, 0x00},
> + {0x30cf, 0x00},
> + {0x30d8, 0x18},
> + {0x30d9, 0x0a},
> + {0x304c, 0x00},
> + {0x304e, 0x00},
> + {0x304f, 0x00},
> + {0x3050, 0x00},
> + {0x30b6, 0x00},
> + {0x30b7, 0x00},
> + {0x3116, 0x08},
> + {0x3117, 0x00},
> + {0x31a0, 0x20},
> + {0x31a1, 0x0f},
> + {0x300c, 0x3b},
> + {0x300d, 0x29},
> + {0x314c, 0x29},
> + {0x314d, 0x01},
> + {0x315a, 0x06},
> + {0x3168, 0xa0},
> + {0x316a, 0x7e},
> + {0x319e, 0x02},
> + {0x3199, 0x00},
> + {0x319d, 0x00},
> + {0x31dd, 0x03},
> + {0x3300, 0x00},
> + {0x341c, 0xff},
> + {0x341d, 0x01},
> + {0x3a01, 0x03},
> + {0x3a18, 0x7f},
> + {0x3a19, 0x00},
> + {0x3a1a, 0x37},
> + {0x3a1b, 0x00},
> + {0x3a1c, 0x37},
> + {0x3a1d, 0x00},
> + {0x3a1e, 0xf7},
> + {0x3a1f, 0x00},
> + {0x3a20, 0x3f},
> + {0x3a21, 0x00},
> + {0x3a20, 0x6f},
> + {0x3a21, 0x00},
> + {0x3a20, 0x3f},
> + {0x3a21, 0x00},
> + {0x3a20, 0x5f},
> + {0x3a21, 0x00},
> + {0x3a20, 0x2f},
> + {0x3a21, 0x00},
> + {0x3078, 0x02},
> + {0x3079, 0x00},
> + {0x307a, 0x00},
> + {0x307b, 0x00},
> + {0x3080, 0x02},
> + {0x3081, 0x00},
> + {0x3082, 0x00},
> + {0x3083, 0x00},
> + {0x3088, 0x02},
> + {0x3094, 0x00},
> + {0x3095, 0x00},
> + {0x3096, 0x00},
> + {0x309b, 0x02},
> + {0x309c, 0x00},
> + {0x309d, 0x00},
> + {0x309e, 0x00},
> + {0x30a4, 0x00},
> + {0x30a5, 0x00},
> + {0x3288, 0x21},
> + {0x328a, 0x02},
> + {0x3414, 0x05},
> + {0x3416, 0x18},
> + {0x35Ac, 0x0e},
> + {0x3648, 0x01},
> + {0x364a, 0x04},
> + {0x364c, 0x04},
> + {0x3678, 0x01},
> + {0x367c, 0x31},
> + {0x367e, 0x31},
> + {0x3708, 0x02},
> + {0x3714, 0x01},
> + {0x3715, 0x02},
> + {0x3716, 0x02},
> + {0x3717, 0x02},
> + {0x371c, 0x3d},
> + {0x371d, 0x3f},
> + {0x372c, 0x00},
> + {0x372d, 0x00},
> + {0x372e, 0x46},
> + {0x372f, 0x00},
> + {0x3730, 0x89},
> + {0x3731, 0x00},
> + {0x3732, 0x08},
> + {0x3733, 0x01},
> + {0x3734, 0xfe},
> + {0x3735, 0x05},
> + {0x375d, 0x00},
> + {0x375e, 0x00},
> + {0x375f, 0x61},
> + {0x3760, 0x06},
> + {0x3768, 0x1b},
> + {0x3769, 0x1b},
> + {0x376a, 0x1a},
> + {0x376b, 0x19},
> + {0x376c, 0x18},
> + {0x376d, 0x14},
> + {0x376e, 0x0f},
> + {0x3776, 0x00},
> + {0x3777, 0x00},
> + {0x3778, 0x46},
> + {0x3779, 0x00},
> + {0x377a, 0x08},
> + {0x377b, 0x01},
> + {0x377c, 0x45},
> + {0x377d, 0x01},
> + {0x377e, 0x23},
> + {0x377f, 0x02},
> + {0x3780, 0xd9},
> + {0x3781, 0x03},
> + {0x3782, 0xf5},
> + {0x3783, 0x06},
> + {0x3784, 0xa5},
> + {0x3788, 0x0f},
> + {0x378a, 0xd9},
> + {0x378b, 0x03},
> + {0x378c, 0xeb},
> + {0x378d, 0x05},
> + {0x378e, 0x87},
> + {0x378f, 0x06},
> + {0x3790, 0xf5},
> + {0x3792, 0x43},
> + {0x3794, 0x7a},
> + {0x3796, 0xa1},
> + {0x37b0, 0x37},
> + {0x3e04, 0x0e},
> + {0x30e8, 0x50},
> + {0x30e9, 0x00},
> + {0x3e04, 0x0e},
> + {0x3002, 0x00},
> +};
> +
> +/* Sensor mode registers for 3840x2160@...ps */
> static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3000, 0x01},
> {0x3002, 0x00},
> @@ -263,20 +426,53 @@ static const struct imx334_reg mode_3840x2160_regs[] = {
> {0x3a29, 0x00},
> };
>
> +static const struct imx334_reg raw10_framefmt_regs[] = {
> + {0x3050, 0x00},
> + {0x319d, 0x00},
> + {0x341c, 0xff},
> + {0x341d, 0x01},
> +};
> +
> +static const struct imx334_reg raw12_framefmt_regs[] = {
> + {0x3050, 0x01},
> + {0x319d, 0x01},
> + {0x341c, 0x47},
> + {0x341d, 0x00},
> +};
> +
> +static const u32 imx334_mbus_codes[] = {
> + MEDIA_BUS_FMT_SRGGB12_1X12,
> + MEDIA_BUS_FMT_SRGGB10_1X10,
> +};
> +
> /* Supported sensor mode configurations */
> -static const struct imx334_mode supported_mode = {
> - .width = 3840,
> - .height = 2160,
> - .hblank = 560,
> - .vblank = 2340,
> - .vblank_min = 90,
> - .vblank_max = 132840,
> - .pclk = 594000000,
> - .link_freq_idx = 0,
> - .code = MEDIA_BUS_FMT_SRGGB12_1X12,
> - .reg_list = {
> - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> - .regs = mode_3840x2160_regs,
> +static const struct imx334_mode supported_modes[] = {
> + {
> + .width = 3840,
> + .height = 2160,
> + .hblank = 560,
> + .vblank = 2340,
> + .vblank_min = 90,
> + .vblank_max = 132840,
> + .pclk = 594000000,
> + .link_freq_idx = 0,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs),
> + .regs = mode_3840x2160_regs,
> + },
> + }, {
> + .width = 1920,
> + .height = 1080,
> + .hblank = 2480,
> + .vblank = 1170,
> + .vblank_min = 45,
> + .vblank_max = 132840,
> + .pclk = 297000000,
> + .link_freq_idx = 0,
> + .reg_list = {
> + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs),
> + .regs = mode_1920x1080_regs,
> + },
> },
> };
>
> @@ -518,6 +714,18 @@ static const struct v4l2_ctrl_ops imx334_ctrl_ops = {
> .s_ctrl = imx334_set_ctrl,
> };
>
> +static int imx334_get_format_code(struct imx334 *imx334, u32 code)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); i++) {
> + if (imx334_mbus_codes[i] == code)
> + return imx334_mbus_codes[i];
> + }
> +
> + return imx334_mbus_codes[0];
> +}
> +
> /**
> * imx334_enum_mbus_code() - Enumerate V4L2 sub-device mbus codes
> * @sd: pointer to imx334 V4L2 sub-device structure
> @@ -530,10 +738,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_mbus_code_enum *code)
> {
> - if (code->index > 0)
> + if (code->index >= ARRAY_SIZE(imx334_mbus_codes))
> return -EINVAL;
>
> - code->code = supported_mode.code;
> + code->code = imx334_mbus_codes[code->index];
>
> return 0;
> }
> @@ -550,15 +758,20 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_frame_size_enum *fsize)
> {
> - if (fsize->index > 0)
> + struct imx334 *imx334 = to_imx334(sd);
> + u32 code;
> +
> + if (fsize->index >= ARRAY_SIZE(supported_modes))
> return -EINVAL;
>
> - if (fsize->code != supported_mode.code)
> + code = imx334_get_format_code(imx334, fsize->code);
> +
> + if (fsize->code != code)
> return -EINVAL;
>
> - fsize->min_width = supported_mode.width;
> + fsize->min_width = supported_modes[fsize->index].width;
> fsize->max_width = fsize->min_width;
> - fsize->min_height = supported_mode.height;
> + fsize->min_height = supported_modes[fsize->index].height;
> fsize->max_height = fsize->min_height;
>
> return 0;
> @@ -577,7 +790,6 @@ static void imx334_fill_pad_format(struct imx334 *imx334,
> {
> fmt->format.width = mode->width;
> fmt->format.height = mode->height;
> - fmt->format.code = mode->code;
> fmt->format.field = V4L2_FIELD_NONE;
> fmt->format.colorspace = V4L2_COLORSPACE_RAW;
> fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
> @@ -607,6 +819,7 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd,
> framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> fmt->format = *framefmt;
> } else {
> + fmt->format.code = imx334->cur_code;
> imx334_fill_pad_format(imx334, imx334->cur_mode, fmt);
> }
>
> @@ -633,15 +846,21 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd,
>
> mutex_lock(&imx334->mutex);
>
> - mode = &supported_mode;
> + mode = v4l2_find_nearest_size(supported_modes,
> + ARRAY_SIZE(supported_modes),
> + width, height,
> + fmt->format.width, fmt->format.height);
> +
> imx334_fill_pad_format(imx334, mode, fmt);
> + fmt->format.code = imx334_get_format_code(imx334, fmt->format.code);
>
> if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> struct v4l2_mbus_framefmt *framefmt;
>
> framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> *framefmt = fmt->format;
> - } else {
> + } else if (imx334->cur_mode != mode || imx334->cur_code != fmt->format.code) {
> + imx334->cur_code = fmt->format.code;
> ret = imx334_update_controls(imx334, mode);
> if (!ret)
> imx334->cur_mode = mode;
> @@ -666,11 +885,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd,
> struct v4l2_subdev_format fmt = { 0 };
>
> fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> - imx334_fill_pad_format(imx334, &supported_mode, &fmt);
> + imx334_fill_pad_format(imx334, &supported_modes[0], &fmt);
Now that there are multiple modes supported, this would appear to get the
width, height as well as the other fields (apart from mbus code) from the
first mode.
>
> return imx334_set_pad_format(sd, sd_state, &fmt);
> }
>
> +static int imx334_set_framefmt(struct imx334 *imx334)
> +{
> + switch (imx334->cur_code) {
> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> + return imx334_write_regs(imx334, raw10_framefmt_regs,
> + ARRAY_SIZE(raw10_framefmt_regs));
> +
> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> + return imx334_write_regs(imx334, raw12_framefmt_regs,
> + ARRAY_SIZE(raw12_framefmt_regs));
> + }
> +
> + return -EINVAL;
> +}
> +
> /**
> * imx334_start_streaming() - Start sensor stream
> * @imx334: pointer to imx334 device
> @@ -691,6 +925,13 @@ static int imx334_start_streaming(struct imx334 *imx334)
> return ret;
> }
>
> + ret = imx334_set_framefmt(imx334);
> + if (ret) {
> + dev_err(imx334->dev, "%s failed to set frame format: %d\n",
> + __func__, ret);
> + return ret;
> + }
> +
> /* Setup handler will write actual exposure and gain */
> ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler);
> if (ret) {
> @@ -1061,7 +1302,8 @@ static int imx334_probe(struct i2c_client *client)
> }
>
> /* Set default mode to max resolution */
> - imx334->cur_mode = &supported_mode;
> + imx334->cur_mode = &supported_modes[0];
> + imx334->cur_code = imx334_mbus_codes[0];
> imx334->vblank = imx334->cur_mode->vblank;
>
> ret = imx334_init_controls(imx334);
--
Regards,
Sakari Ailus
Powered by blists - more mailing lists