| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y/Xg4T+Zw3jW0/Lb@shell.armlinux.org.uk>
Date: Wed, 22 Feb 2023 09:31:13 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: Clark Wang <xiaoning.wang@....com>
Cc: peppe.cavallaro@...com, alexandre.torgue@...s.st.com,
joabreu@...opsys.com, davem@...emloft.net, edumazet@...gle.com,
kuba@...nel.org, pabeni@...hat.com, mcoquelin.stm32@...il.com,
andrew@...n.ch, hkallweit1@...il.com, netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-imx@....com
Subject: Re: [PATCH net-next V4 1/2] net: phylink: add a function to resume
PHY alone to fix resume issue with WoL enabled
net-next is closed due to the merge window. Please resubmit after
6.3-rc1. Thanks.
On Wed, Feb 22, 2023 at 05:26:35PM +0800, Clark Wang wrote:
> Issue we met:
> On some platforms, MAC cannot work after resumed from the suspend with WoL
> enabled.
>
> The cause of the issue:
> 1. phylink_resolve() is in a workqueue which will not be executed immediately.
> This is the call sequence:
> phylink_resolve()->phylink_link_up()->pl->mac_ops->mac_link_up()
> For stmmac driver, mac_link_up() will set the correct speed/duplex...
> values which are from link_state.
> 2. In stmmac_resume(), it will call stmmac_hw_setup() after called the
> phylink_resume(), because MAC need PHY rx_clk to do the reset.
> stmmac_core_init() is called in function stmmac_hw_setup(), which will
> reset the MAC and set the speed/duplex... to default value.
> Conclusion: Because phylink_resolve() cannot determine when it is called, it
> cannot be guaranteed to be called after stmmac_core_init().
> Once stmmac_core_init() is called after phylink_resolve(),
> the MAC will be misconfigured and cannot be used.
>
> In order to avoid this problem, add a function called phylink_phy_resume()
> to resume PHY separately. This eliminates the need to call phylink_resume()
> before stmmac_hw_setup().
>
> Add another judgement before called phy_start() in phylink_start(). This way
> phy_start() will not be called multiple times when resumes. At the same time,
> it may not affect other drivers that do not use phylink_phy_resume().
>
> Signed-off-by: Clark Wang <xiaoning.wang@....com>
> ---
> V2 change:
> - add mac_resume_phy_separately flag to struct phylink to mark if the MAC
> driver uses the phylink_phy_resume() first.
> V3 change:
> - add brace to avoid ambiguous 'else'
> Reported-by: kernel test robot <lkp@...el.com>
> V4:
> Many thanks to Jakub and Russel for their suggestions, here are the changes for V4.
> - Unify MAC and PHY in comments and subject to uppercase.
> - Add subject of the sentence.
> - Move && to the end of the line
> - Add notice in the comment of function phylink_phy_resume()
> ---
> drivers/net/phy/phylink.c | 35 +++++++++++++++++++++++++++++++++--
> include/linux/phylink.h | 1 +
> 2 files changed, 34 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index ea8fcce5b2d9..0be57e9463d9 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -80,6 +80,8 @@ struct phylink {
> DECLARE_PHY_INTERFACE_MASK(sfp_interfaces);
> __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
> u8 sfp_port;
> +
> + bool mac_resume_phy_separately;
> };
>
> #define phylink_printk(level, pl, fmt, ...) \
> @@ -1509,6 +1511,7 @@ struct phylink *phylink_create(struct phylink_config *config,
> return ERR_PTR(-EINVAL);
> }
>
> + pl->mac_resume_phy_separately = false;
> pl->using_mac_select_pcs = using_mac_select_pcs;
> pl->phy_state.interface = iface;
> pl->link_interface = iface;
> @@ -1942,8 +1945,12 @@ void phylink_start(struct phylink *pl)
> }
> if (poll)
> mod_timer(&pl->link_poll, jiffies + HZ);
> - if (pl->phydev)
> - phy_start(pl->phydev);
> + if (pl->phydev) {
> + if (!pl->mac_resume_phy_separately)
> + phy_start(pl->phydev);
> + else
> + pl->mac_resume_phy_separately = false;
> + }
> if (pl->sfp_bus)
> sfp_upstream_start(pl->sfp_bus);
> }
> @@ -2023,6 +2030,30 @@ void phylink_suspend(struct phylink *pl, bool mac_wol)
> }
> EXPORT_SYMBOL_GPL(phylink_suspend);
>
> +/**
> + * phylink_phy_resume() - resume PHY alone
> + * @pl: a pointer to a &struct phylink returned from phylink_create()
> + *
> + * In the MAC driver using phylink, if the MAC needs the clock of the PHY
> + * when it resumes, it can call this function to resume the PHY separately.
> + * Then proceed to MAC resume operations.
> + *
> + * Note: This function MUST ONLY be called before calling phylink_start()
> + * in the MAC resume function.
> + */
> +void phylink_phy_resume(struct phylink *pl)
> +{
> + ASSERT_RTNL();
> +
> + if (!test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state) &&
> + pl->phydev) {
> + phy_start(pl->phydev);
> + pl->mac_resume_phy_separately = true;
> + }
> +
> +}
> +EXPORT_SYMBOL_GPL(phylink_phy_resume);
> +
> /**
> * phylink_resume() - handle a network device resume event
> * @pl: a pointer to a &struct phylink returned from phylink_create()
> diff --git a/include/linux/phylink.h b/include/linux/phylink.h
> index c492c26202b5..6edfab5f754c 100644
> --- a/include/linux/phylink.h
> +++ b/include/linux/phylink.h
> @@ -589,6 +589,7 @@ void phylink_stop(struct phylink *);
>
> void phylink_suspend(struct phylink *pl, bool mac_wol);
> void phylink_resume(struct phylink *pl);
> +void phylink_phy_resume(struct phylink *pl);
>
> void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *);
> int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *);
> --
> 2.34.1
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists