| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 22 Feb 2023 16:12:38 +0100
From: Richard Gobert <richardbgobert@...il.com>
To: davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
pabeni@...hat.com, dsahern@...nel.org, alexanderduyck@...com,
lixiaoyan@...gle.com, steffen.klassert@...unet.com,
lucien.xin@...il.com, ye.xingchen@....com.cn, iwienand@...hat.com,
leon@...nel.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] gro: optimise redundant parsing of packets
Currently the IPv6 extension headers are parsed twice: first in
ipv6_gro_receive, and then again in ipv6_gro_complete.
By using the new ->transport_proto field, and also storing the size of the
network header, we can avoid parsing extension headers a second time in
ipv6_gro_complete (which saves multiple memory dereferences and conditional
checks inside ipv6_exthdrs_len for a varying amount of extension headers in IPv6
packets).
The implementation had to handle both inner and outer layers in case of
encapsulation (as they can't use the same field).
Performance tests for TCP stream over IPv6 with a varying amount of extension
headers demonstrate throughput improvement of ~0.7%.
In addition, I fixed a potential existing problem:
- The call to skb_set_inner_network_header at the beginning of
ipv6_gro_complete calculates inner_network_header based on skb->data by
calling skb_set_inner_network_header, and setting it to point to the beginning
of the ip header.
- If a packet is going to be handled by BIG TCP, the following code block is
going to shift the packet header, and skb->data is going to be changed as
well.
When the two flows are combined, inner_network_header will point to the wrong
place.
The fix is to place the whole encapsulation branch after the BIG TCP code block.
This way, inner_network_header is calculated with a correct value of skb->data.
Also, by arranging the code that way, the optimisation does not add an additional
branch.
Signed-off-by: Richard Gobert <richardbgobert@...il.com>
---
include/net/gro.h | 9 +++++++++
net/ethernet/eth.c | 14 +++++++++++---
net/ipv6/ip6_offload.c | 20 +++++++++++++++-----
3 files changed, 35 insertions(+), 8 deletions(-)
diff --git a/include/net/gro.h b/include/net/gro.h
index 7b47dd6ce94f..35f60ea99f6c 100644
--- a/include/net/gro.h
+++ b/include/net/gro.h
@@ -86,6 +86,15 @@ struct napi_gro_cb {
/* used to support CHECKSUM_COMPLETE for tunneling protocols */
__wsum csum;
+
+ /* Used in ipv6_gro_receive() */
+ u16 network_len;
+
+ /* Used in eth_gro_receive() */
+ __be16 network_proto;
+
+ /* Used in ipv6_gro_receive() */
+ u8 transport_proto;
};
#define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb)
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 2edc8b796a4e..c2b77d9401e4 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -439,6 +439,9 @@ struct sk_buff *eth_gro_receive(struct list_head *head, struct sk_buff *skb)
goto out;
}
+ if (!NAPI_GRO_CB(skb)->encap_mark)
+ NAPI_GRO_CB(skb)->network_proto = type;
+
skb_gro_pull(skb, sizeof(*eh));
skb_gro_postpull_rcsum(skb, eh, sizeof(*eh));
@@ -455,13 +458,18 @@ EXPORT_SYMBOL(eth_gro_receive);
int eth_gro_complete(struct sk_buff *skb, int nhoff)
{
- struct ethhdr *eh = (struct ethhdr *)(skb->data + nhoff);
- __be16 type = eh->h_proto;
struct packet_offload *ptype;
+ struct ethhdr *eh;
int err = -ENOSYS;
+ __be16 type;
- if (skb->encapsulation)
+ if (skb->encapsulation) {
+ eh = (struct ethhdr *)(skb->data + nhoff);
skb_set_inner_mac_header(skb, nhoff);
+ type = eh->h_proto;
+ } else {
+ type = NAPI_GRO_CB(skb)->network_proto;
+ }
ptype = gro_find_complete_by_type(type);
if (ptype != NULL)
diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c
index 00dc2e3b0184..6e3a923ad573 100644
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -232,6 +232,11 @@ INDIRECT_CALLABLE_SCOPE struct sk_buff *ipv6_gro_receive(struct list_head *head,
flush--;
nlen = skb_network_header_len(skb);
+ if (!NAPI_GRO_CB(skb)->encap_mark) {
+ NAPI_GRO_CB(skb)->transport_proto = proto;
+ NAPI_GRO_CB(skb)->network_len = nlen;
+ }
+
list_for_each_entry(p, head, list) {
const struct ipv6hdr *iph2;
__be32 first_word; /* <Version:4><Traffic_Class:8><Flow_Label:20> */
@@ -324,10 +329,6 @@ INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff)
int err = -ENOSYS;
u32 payload_len;
- if (skb->encapsulation) {
- skb_set_inner_protocol(skb, cpu_to_be16(ETH_P_IPV6));
- skb_set_inner_network_header(skb, nhoff);
- }
payload_len = skb->len - nhoff - sizeof(*iph);
if (unlikely(payload_len > IPV6_MAXPLEN)) {
@@ -341,6 +342,7 @@ INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff)
skb->len += hoplen;
skb->mac_header -= hoplen;
skb->network_header -= hoplen;
+ NAPI_GRO_CB(skb)->network_len += hoplen;
iph = (struct ipv6hdr *)(skb->data + nhoff);
hop_jumbo = (struct hop_jumbo_hdr *)(iph + 1);
@@ -358,7 +360,15 @@ INDIRECT_CALLABLE_SCOPE int ipv6_gro_complete(struct sk_buff *skb, int nhoff)
iph->payload_len = htons(payload_len);
}
- nhoff += sizeof(*iph) + ipv6_exthdrs_len(iph, &ops);
+ if (skb->encapsulation) {
+ skb_set_inner_protocol(skb, cpu_to_be16(ETH_P_IPV6));
+ skb_set_inner_network_header(skb, nhoff);
+ nhoff += sizeof(*iph) + ipv6_exthdrs_len(iph, &ops);
+ } else {
+ ops = rcu_dereference(inet6_offloads[NAPI_GRO_CB(skb)->transport_proto]);
+ nhoff += NAPI_GRO_CB(skb)->network_len;
+ }
+
if (WARN_ON(!ops || !ops->callbacks.gro_complete))
goto out;
--
2.36.1
Powered by blists - more mailing lists