Message-Id: <20230223153655.262783-1-bryan.odonoghue@linaro.org>
Date:   Thu, 23 Feb 2023 15:36:50 +0000
From:   Bryan O'Donoghue <bryan.odonoghue@...aro.org>
To:     agross@...nel.org, andersson@...nel.org, konrad.dybcio@...aro.org,
        djakov@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org
Cc:     bryan.odonoghue@...aro.org, linux-arm-msm@...r.kernel.org,
        linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, benl@...areup.com,
        shawn.guo@...aro.org, fabien.parent@...aro.org, leo.yan@...aro.org,
        dmitry.baryshkov@...aro.org, stephan@...hold.net
Subject: [PATCH v7 0/5] Add MSM8939 SoC support with two devices

V7:
- Addresses all of Konrad's asks on V6
- Adds Konrad's RB for patch #3
Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-23-msm8939-nocpr
Previous: https://lore.kernel.org/lkml/20230222120411.55197-2-bryan.odonoghue@linaro.org/T/

V6:
- Adds Krzysztof's Ack for Square vendor addition - Krzysztof
- Incorporates all of Stephan's comments from V5, including
  dropping CPR dummy given the dependent patch [1] has been merged, now.

Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-21-msm8939-nocpr
Previous: https://lore.kernel.org/lkml/20230206012336.2130341-1-bryan.odonoghue@linaro.org/T/
[1]: https://lore.kernel.org/linux-arm-msm/20230208153913.24436-2-ansuelsmth@gmail.com/

V5:
- Adds Square as a vendor - Krzysztof

- typec_pd: usb-pd@38 - Krzysztof

- Drops gcc clock controller extension. It looks like phy0 actually
  provides a PLL to phy1 for its byte clock. - Bryan, Krzysztof, Stephan

- Adds RB Konrad as indicated - Konrad

- wcnss VDDMX_AO -> VDDMX - Bjorn

- Adds dsi_phy0 as clock-parent to dsi1

- mdss interconnect drops Androidism "register-mem" - Stephan

- cpu power-domain. I've retained the "dummy" cpr reference to
  satiate dtbs_check [1] but renamed &vreg_cpr_stub to remove any confusion
  between now and when we finish off CPR on 8939.

Bootable: https://git.codelinaro.org/bryan.odonoghue/kernel/-/commits/linux-next-23-02-02-msm8939-nocpr
Previous: https://lore.kernel.org/linux-arm-msm/20230123023127.1186619-1-bryan.odonoghue@linaro.org/
[1] https://lore.kernel.org/linux-arm-msm/20230126150026.14590-1-ansuelsmth@gmail.com/ 

V4:
- Adds Krzysztof's RB to snoc-mm
- Re-orders alphabetically missed nodes in previous iteration - Bjorn
- Adds LK address/size cells comment - Bjorn

- Left _AO for wcnss as downstream reference uses this - Bjorn/Bryan
- Uses qcom,ids.h and QCOM_ID_SOCNAME for qcom,msm-id - Bjorn
- Revises comment from "Regulator" to "Power supply" - Bjorn
- Leaves dummy power-domain reference in cpu defintion as this

- Relabels "cpu" to "CPU" to be more consistent with other dtsi - Bryan
- Moves msm8939 gcc to its own yaml file to capture 8939 specific form - Bryan

  is a required property and the dt checker complains - Stephan/Bryan
- Removes CPR entries from qfprom - Stephan
- Left MDSS interconnects. I don't see a bug to fix here - Stephan/Bryan
- power-domain in MDSS - dropped its not longer required after
  commit a6f033938beb ("dt-bindings: msm: dsi-controller-main: Fix power-domain constraint") - Stephan
- Adds gcc dsi1pll and dsi1pllbyte to gcc clock list.
  Reviewing the silicon documentation we see dsi0_phy_pll is used to clock
  GCC_BYTE1_CFG_RCGR : SRC_SEL
  Root Source Select
  000 : cxo
  001 : dsi0_phy_pll_out_byteclk
  010 : GPLL0_OUT_AUX
  011 : gnd
  100 : gnd
  101 : gnd
  110 : gnd
  111 : reserved - Stephan/Bryan

- pm8916_l16 -> pm8916_l6 in dsi definition, typo - Konrad
- Moved regulator_set_load location - Konrad

Previous: https://lore.kernel.org/lkml/20230118050948.bibhq26s6sgzullg@builder.lan/T/
Bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-23-msm8939-nocpr

V3:
- Happily I don't currently depend on any other series to be merged.
  Bjorn and Chanwoo picked up everything I need to unblock this series. ＼(^o^)／

- Moves xo_board to RPM/PMIC clock gated CXO, not including rpmcc: obvs - Konrad/Bjorn
- qcom,msm-id = <239 0> - left as in V2 valid according to Sony references - bod
- cpu-release-addr - as stated below we rely on lk2nd to take the second cluster
  out of reset - bod
- smem child node update - Konrad
- Whitespace updates - Konrad
- gpu no interconnect - Konrad - No bod
- 19.2 MHz dropped from timer@...0000 - Konrad
- Added vreg_dummy comment - Konrad
- sdc_pins grouped - Konrad
- startup-delay-us = <0> - left as is
- bias - added no-bias - Konrad
- :g/msmgpio/s//tlmm/g - Konrad
- mdss/s//display-controller - Konrad
- l11 set-load - Korad

- l12 upper voltage raised to 3.3v since this is what the
  downstream kernel says when I boot and interrogate it - bod

- sdhc@...ress - Discussed with Krzysztof and implemented as discussed
- snoc-mm fix - Discussed with Krzysztof implemented if:then:else:not
- dtc -I dtb -fs apq8039-t2.dtb prodcues
  /soc@...2c@...5000: duplicate unit-address
  as does every other component that uses this polymorphic dts node
- Renamed type-c i2c port manager IC to "typec" - Krzysztof

  /smsm/hexagon@1: Missing #address-cells in interrupt provider
  Same output as other upstream and recently upstreamed SoCs
  I left these alone for now

link: https://lore.kernel.org/lkml/20230103010904.3201835-1-bryan.odonoghue@linaro.org/T/
bootable: https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-16-msm8939-nocpr

V2:
- Sorts core dtsi node list by address followed by alpahbetical sorting
  within address sorted nodes - Bjorn
- Drops use of 8916-pins - Bjorn
- Adds msm8939-pm8916.dtsi - Stephan
- Fixes every dts splat from previous submission minus non-converted
  .txt compat strings [1] and one yaml error in Bjorn's tree not in -next yet
- I haven't applied Dmitry's change for tsens since that's not been
  picked up yet
- Picks up a number of suggestions and fixes from Stephan Gerhold and Vincent Knecht

- Depends on

  Applied:
  [PATCH v4 0/7] remoteproc: qcom_q6v5_mss: Add MSM8909 and MSM8953 
  https://lore.kernel.org/linux-arm-msm/167216232800.738877.17567287056128563074.b4-ty@kernel.org/

  [PATCH v6 0/5] remoteproc: qcom: Add support for pronto-v3
  https://lore.kernel.org/linux-arm-msm/167216232801.738877.15895916910585144737.b4-ty@kernel.org/

  [PATCH v6 00/18] mdss-dsi-ctrl binding and dts fixes
  https://lore.kernel.org/linux-arm-msm/167233461766.1099840.17628700245792986354.b4-ty@kernel.org/

  Awaiting application:
  https://lore.kernel.org/linux-arm-msm/20221228133058.213886-1-bryan.odonoghue@linaro.org/

- Previous
  https://lore.kernel.org/linux-arm-msm/20220419010903.3109514-1-bryan.odonoghue@linaro.org/

- Bootable tree
  https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=linux-next-23-01-03-msm8939-no-cpr

- [1] DTC_CHK arch/arm64/boot/dts/qcom/apq8039-t2.dtb

  Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
  qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:0: 'qcom,idle-state-spc' is not one of ['arm,idle-state', 'riscv,idle-state']
        From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml
  qcom/apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible: ['qcom,idle-state-spc', 'arm,idle-state'] is too long
        From schema: Documentation/devicetree/bindings/cpu/idle-states.yaml
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /cpus/idle-states/cpu-sleep-0: failed to match any schema with compatible: ['qcom,idle-state-spc', 'arm,idle-state']

  Documentation/devicetree/bindings/iommu/qcom,iommu.txt
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...ommu@...0000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...ommu@...0000/iommu-ctx@...0: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...ommu@...0000/iommu-ctx@...0: failed to match any schema with compatible: ['qcom,msm-iommu-v1-sec']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...ommu@...8000: failed to match any schema with compatible: ['qcom,msm8916-iommu', 'qcom,msm-iommu-v1']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...ommu@...8000/iommu-ctx@...0: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...ommu@...8000/iommu-ctx@...0: failed to match any schema with compatible: ['qcom,msm-iommu-v1-ns']

  arch/arm64/boot/dts/qcom/pm8916.dtsi f5d7bca55425c8
  qcom/apq8039-t2.dtb: pmic@0: 'extcon@...0' does not match any of the regexes: '(.*)?(wled|leds)@[0-9a-f]+$', '^adc-tm@[0-9a-f]+$', '^adc@[0-9a-f]+$', '^audio-codec@[0-9a-f]+$', '^charger@[0-9a-f]+$', '^mpps@[0-9a-f]+$', '^rtc@[0-9a-f]+$', '^temp-alarm@[0-9a-f]+$', '^usb-detect@[0-9a-f]+$', '^usb-vbus-regulator@[0-9a-f]+$', '^vibrator@[0-9a-f]+$', 'gpio@[0-9a-f]+$', 'pinctrl-[0-9]+', 'pon@[0-9a-f]+$'
        From schema: Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml

  Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...pmi@...f000/pmic@...udio-codec@...0: failed to match any schema with compatible: ['qcom,pm8916-wcd-analog-codec']

  yaml documentation error not yet in -next
  arm64/boot/dts/qcom/apq8039-t2.dtb: remoteproc@...0000: qcom,halt-regs:0: [33] is too short
        From schema: Documentation/devicetree/bindings/remoteproc/qcom,msm8916-mss-pil.yaml

  Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...sb@...9000: failed to match any schema with compatible: ['qcom,ci-hdrc']

  Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt:            compatible = "qcom,kpss-acc-v2";
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']
  arch/arm64/boot/dts/qcom/apq8039-t2.dtb:0:0: /soc@...lock-controller@...8000: failed to match any schema with compatible: ['qcom,kpss-acc-v2']

V1:
This series adds in MSM8939 SoC support with two supported devices.

- CPU
  MSM8939 is a non-PSCI compliant device. As such in the downstreaming
  shipped image custom code is used to bring non-boot cores out of reset.

  This drop specifies the boot-method as spin-table instead and is
  completely standard. To accomplish this, we rely on lk2nd.

  https://github.com/msm8916-mainline/lk2nd/pull/142

- Serial
- i2c
- USB
- eMMC
- MDP/DSI
- WiFi
- Bluetooth

What's not included

- CPR
  We have CPR working in a 4.19 kernel quite well but for now it feels like
  putting the cart before the horse to gate the SoC and boards on CPR.

- Venus
  I've been told this works but I haven't tried it myself and right now
  consider it maybe working but probably not 100%.

- Sound
  We have a copy-exactly from the 4.19 kernel here in the DTS.
  I haven't run the sound through any sort of reasonable test.
  Vincent Knecht has some PostmarketOS kernels which use a 5.17 version of
  this DTS to get sound up so, I think sound is in good shape.

- CAMSS
  There are slight differences between msm8916 and msm8939 for CAMSS. It
  doesn't feel like tons of work but, right now it is work we haven't even
  started.

- Devices
  I've booted on the Square device obviously and this is my regular
  hardware for upstream development. I've also booted on the Sony Xperia M4
  Aqua including mutli-core bring-up, WiFi and ADB.

Dependencies for this drop:

qcom-cpufreq-nvmem: Add msm8939 with some fixups
link: https://lore.kernel.org/linux-arm-msm/20220418162226.2983117-1-bryan.odonoghue@linaro.org/T/#t

Fix apq8016 compat string
link: https://lore.kernel.org/linux-arm-msm/20220418230956.3059563-1-bryan.odonoghue@linaro.org/T/#t

dt-bindings: soc: qcom: smd-rpm: Fix missing MSM8936 compatible
link: https://lore.kernel.org/linux-arm-msm/20220418231857.3061053-1-bryan.odonoghue@linaro.org/T/#u

Bootable tree here:
https://git.linaro.org/people/bryan.odonoghue/kernel.git/log/?h=v5.18-rc2%2bapq8039-without-cpr

Bryan O'Donoghue (4):
  dt-bindings: vendor-prefixes: Add Square
  arm64: dts: qcom: Add msm8939 SoC
  arm64: dts: qcom: Add Square apq8039-t2 board
  arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua

Stephan Gerhold (1):
  arm64: dts: qcom: Add msm8939-pm8916.dtsi include

 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 arch/arm64/boot/dts/qcom/Makefile             |    2 +
 arch/arm64/boot/dts/qcom/apq8039-t2.dts       |  550 ++++
 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi  |   82 +
 .../qcom/msm8939-sony-xperia-kanuti-tulip.dts |  457 +++
 arch/arm64/boot/dts/qcom/msm8939.dtsi         | 2456 +++++++++++++++++
 6 files changed, 3549 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts
 create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi

-- 
2.39.1

Powered by blists - more mailing lists