[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20230223162635.19747-4-kyarlagadda@nvidia.com>
Date: Thu, 23 Feb 2023 21:56:35 +0530
From: Krishna Yarlagadda <kyarlagadda@...dia.com>
To: <robh+dt@...nel.org>, <broonie@...nel.org>, <peterhuewe@....de>,
<jgg@...pe.ca>, <jarkko@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <linux-spi@...r.kernel.org>,
<linux-tegra@...r.kernel.org>, <linux-integrity@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <thierry.reding@...il.com>, <jonathanh@...dia.com>,
<skomatineni@...dia.com>, <ldewangan@...dia.com>,
Krishna Yarlagadda <kyarlagadda@...dia.com>
Subject: [Patch V3 3/3] spi: tegra210-quad: Enable TPM wait polling
Trusted Platform Module requires flow control. As defined in TPM
interface specification, client would drive MISO line at same cycle as
last address bit on MOSI.
Tegra241 QSPI controller has TPM wait state detection feature which is
enabled for TPM client devices reported in SPI device mode bits.
Set half duplex flag for TPM device to detect and send entire message
to controller in one shot.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@...dia.com>
---
drivers/spi/spi-tegra210-quad.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
index b967576b6c96..fe15fa6eecd1 100644
--- a/drivers/spi/spi-tegra210-quad.c
+++ b/drivers/spi/spi-tegra210-quad.c
@@ -142,6 +142,7 @@
#define QSPI_GLOBAL_CONFIG 0X1a4
#define QSPI_CMB_SEQ_EN BIT(0)
+#define QSPI_TPM_WAIT_POLL_EN BIT(1)
#define QSPI_CMB_SEQ_ADDR 0x1a8
#define QSPI_ADDRESS_VALUE_SET(X) (((x) & 0xFFFF) << 0)
@@ -164,6 +165,7 @@
struct tegra_qspi_soc_data {
bool has_dma;
bool cmb_xfer_capable;
+ bool tpm_wait_poll;
unsigned int cs_count;
};
@@ -991,6 +993,14 @@ static void tegra_qspi_dump_regs(struct tegra_qspi *tqspi)
dev_dbg(tqspi->dev, "TRANS_STAT: 0x%08x | FIFO_STATUS: 0x%08x\n",
tegra_qspi_readl(tqspi, QSPI_TRANS_STATUS),
tegra_qspi_readl(tqspi, QSPI_FIFO_STATUS));
+ dev_dbg(tqspi->dev, "GLOBAL_CFG: 0x%08x\n",
+ tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG));
+ dev_dbg(tqspi->dev, "CMB_CMD: 0x%08x | CMB_CMD_CFG: 0x%08x\n",
+ tegra_qspi_readl(tqspi, QSPI_CMB_SEQ_CMD),
+ tegra_qspi_readl(tqspi, QSPI_CMB_SEQ_CMD_CFG));
+ dev_dbg(tqspi->dev, "CMB_ADDR: 0x%08x | CMB_ADDR_CFG: 0x%08x\n",
+ tegra_qspi_readl(tqspi, QSPI_CMB_SEQ_ADDR),
+ tegra_qspi_readl(tqspi, QSPI_CMB_SEQ_ADDR_CFG));
}
static void tegra_qspi_handle_error(struct tegra_qspi *tqspi)
@@ -1065,6 +1075,12 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi,
/* Enable Combined sequence mode */
val = tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG);
+ if (spi->mode & SPI_TPM_HW_FLOW) {
+ if (tqspi->soc_data->tpm_wait_poll)
+ val |= QSPI_TPM_WAIT_POLL_EN;
+ else
+ return -EIO;
+ }
val |= QSPI_CMB_SEQ_EN;
tegra_qspi_writel(tqspi, val, QSPI_GLOBAL_CONFIG);
/* Process individual transfer list */
@@ -1192,6 +1208,7 @@ static int tegra_qspi_non_combined_seq_xfer(struct tegra_qspi *tqspi,
/* Disable Combined sequence mode */
val = tegra_qspi_readl(tqspi, QSPI_GLOBAL_CONFIG);
val &= ~QSPI_CMB_SEQ_EN;
+ val &= ~QSPI_TPM_WAIT_POLL_EN;
tegra_qspi_writel(tqspi, val, QSPI_GLOBAL_CONFIG);
list_for_each_entry(transfer, &msg->transfers, transfer_list) {
struct spi_transfer *xfer = transfer;
@@ -1450,24 +1467,28 @@ static irqreturn_t tegra_qspi_isr_thread(int irq, void *context_data)
static struct tegra_qspi_soc_data tegra210_qspi_soc_data = {
.has_dma = true,
.cmb_xfer_capable = false,
+ .tpm_wait_poll = false,
.cs_count = 1,
};
static struct tegra_qspi_soc_data tegra186_qspi_soc_data = {
.has_dma = true,
.cmb_xfer_capable = true,
+ .tpm_wait_poll = false,
.cs_count = 1,
};
static struct tegra_qspi_soc_data tegra234_qspi_soc_data = {
.has_dma = false,
.cmb_xfer_capable = true,
+ .tpm_wait_poll = true,
.cs_count = 1,
};
static struct tegra_qspi_soc_data tegra241_qspi_soc_data = {
.has_dma = false,
.cmb_xfer_capable = true,
+ .tpm_wait_poll = true,
.cs_count = 4,
};
--
2.17.1
Powered by blists - more mailing lists