| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAK00qKDVm=KyPknEPV+GL6Zq5nsq0-Pk2Hfw7a2H3jpFZtWyJQ@mail.gmail.com>
Date: Fri, 24 Feb 2023 18:22:49 +0800
From: Victor Shih <victorshihgli@...il.com>
To: Adrian Hunter <adrian.hunter@...el.com>
Cc: ulf.hansson@...aro.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, benchuanggli@...il.com,
HL.Liu@...esyslogic.com.tw, Greg.tu@...esyslogic.com.tw,
takahiro.akashi@...aro.org, dlunev@...omium.org,
Victor Shih <victor.shih@...esyslogic.com.tw>,
Ben Chuang <ben.chuang@...esyslogic.com.tw>
Subject: Re: [PATCH V6 17/24] mmc: sdhci-uhs2: add uhs2_control() to
initialise the interface
Hi, Adrian
On Fri, Jan 6, 2023 at 5:28 AM Adrian Hunter <adrian.hunter@...el.com> wrote:
>
> On 13/12/22 11:00, Victor Shih wrote:
> > This is a sdhci version of mmc's uhs2_set_reg operation.
> > UHS-II interface (related registers) will be initialised here.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
> > Signed-off-by: Victor Shih <victor.shih@...esyslogic.com.tw>
> > ---
> > drivers/mmc/host/sdhci-uhs2.c | 92 +++++++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci.c | 11 +++++
> > 2 files changed, 103 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index c7e411fa0a6e..de15a6559702 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -276,6 +276,48 @@ static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > sdhci_set_clock(host, host->clock);
> > }
> >
> > +static void sdhci_uhs2_set_config(struct sdhci_host *host)
> > +{
> > + u32 value;
> > + u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR);
> > + u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
> > + u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
> > + u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
> > + u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
> > +
> > + /* Set Gen Settings */
> > + value = FIELD_PREP(SDHCI_UHS2_GEN_SETTINGS_N_LANES_MASK, host->mmc->uhs2_caps.n_lanes_set);
> > + sdhci_writel(host, value, sdhci_uhs2_gen_set_reg);
> > +
> > + /* Set PHY Settings */
> > + value = FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_DIR_MASK, host->mmc->uhs2_caps.n_lss_dir_set) |
> > + FIELD_PREP(SDHCI_UHS2_PHY_N_LSS_SYN_MASK, host->mmc->uhs2_caps.n_lss_sync_set);
> > + if (host->mmc->flags & MMC_UHS2_SPEED_B)
> > + value |= SDHCI_UHS2_PHY_SET_SPEED_B;
> > + sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
> > +
> > + /* Set LINK-TRAN Settings */
> > + value = FIELD_PREP(SDHCI_UHS2_TRAN_RETRY_CNT_MASK, host->mmc->uhs2_caps.max_retry_set) |
> > + FIELD_PREP(SDHCI_UHS2_TRAN_N_FCU_MASK, host->mmc->uhs2_caps.n_fcu_set);
> > + sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
> > + sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set, sdhci_uhs2_tran_set_1_reg);
> > +}
> > +
> > +static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
> > +{
> > + u32 val;
> > + /* 100ms */
> > + int timeout = 100000;
> > +
> > + if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
> > + 100, timeout, true, host, SDHCI_PRESENT_STATE)) {
> > + pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
> > + sdhci_dumpregs(host);
> > + return -EIO;
> > + }
> > + return 0;
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * MMC callbacks *
> > @@ -361,6 +403,55 @@ static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
> > return 0;
> > }
> >
> > +static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
> > +
> > +static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + int err = 0;
> > + u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SETTINGS_PTR);
> > + u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
> > +
> > + DBG("Begin uhs2 control, act %d.\n", op);
> > +
> > + switch (op) {
> > + case UHS2_PHY_INIT:
> > + err = sdhci_uhs2_do_detect_init(mmc);
> > + break;
> > + case UHS2_SET_CONFIG:
> > + sdhci_uhs2_set_config(host);
> > + break;
> > + case UHS2_ENABLE_INT:
> > + sdhci_uhs2_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
> > + break;
> > + case UHS2_DISABLE_INT:
> > + sdhci_uhs2_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
> > + break;
> > + case UHS2_SET_SPEED_B:
> > + sdhci_writeb(host, SDHCI_UHS2_PHY_SET_SPEED_B, sdhci_uhs2_phy_set_reg);
> > + break;
> > + case UHS2_CHECK_DORMANT:
> > + err = sdhci_uhs2_check_dormant(host);
> > + break;
> > + case UHS2_DISABLE_CLK:
> > + err = sdhci_uhs2_disable_clk(mmc);
> > + break;
> > + case UHS2_ENABLE_CLK:
> > + err = sdhci_uhs2_enable_clk(mmc);
> > + break;
> > + case UHS2_POST_ATTACH_SD:
> > + host->ops->uhs2_post_attach_sd(host);
> > + break;
> > + default:
> > + pr_err("%s: input sd uhs2 operation %d is wrong!\n",
> > + mmc_hostname(host->mmc), op);
> > + err = -EIO;
> > + break;
> > + }
> > +
> > + return err;
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * Driver init/exit *
> > @@ -489,6 +580,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> > host->mmc_host_ops.start_signal_voltage_switch =
> > sdhci_uhs2_start_signal_voltage_switch;
> > host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
> > + host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
> >
> > return 0;
> > }
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index 49bbdc155b2b..3656e66fcca7 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -234,6 +234,17 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_reset);
> >
> > +void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
> > +{
> > + u32 ier;
> > +
> > + ier = sdhci_readl(host, SDHCI_INT_ENABLE);
> > + ier &= ~clear;
> > + ier |= set;
> > + sdhci_writel(host, ier, SDHCI_INT_ENABLE);
> > + sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
> > +}
>
> Not used anymore
>
I will drop it and update in V7 version.
> > +
> > static bool sdhci_do_reset(struct sdhci_host *host, u8 mask)
> > {
> > if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
>
Thanks, Victor Shih
Powered by blists - more mailing lists