| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 24 Feb 2023 13:51:13 +0100
From: Greg KH <gregkh@...uxfoundation.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Jiri Slaby <jslaby@...e.cz>,
Stephen Rothwell <sfr@...b.auug.org.au>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Subject: [GIT PULL] TTY/Serial driver updates for 6.3-rc1
The following changes since commit 4ec5183ec48656cec489c49f989c508b68b518e3:
Linux 6.2-rc7 (2023-02-05 13:13:28 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.3-rc1
for you to fetch changes up to 72206cc730b5c9208e9a99ace1c619f542035312:
tty: n_gsm: add keep alive support (2023-02-16 13:50:50 +0100)
----------------------------------------------------------------
TTY/Serial driver updates for 6.3-rc1
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
----------------------------------------------------------------
Andy Shevchenko (2):
serial: liteuart: Don't mix devm_*() with non-devm_*() calls
serial: liteuart: Remove a copy of UART id in private structure
Bartosz Golaszewski (14):
tty: serial: qcom-geni-serial: stop operations in progress at shutdown
tty: serial: qcom-geni-serial: drop unneeded forward definitions
tty: serial: qcom-geni-serial: remove unused symbols
tty: serial: qcom-geni-serial: align #define values
tty: serial: qcom-geni-serial: improve the to_dev_port() macro
tty: serial: qcom-geni-serial: remove stray newlines
tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()
tty: serial: qcom-geni-serial: remove unneeded tabs
tty: serial: qcom-geni-serial: split out the FIFO tx code
tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()
tty: serial: qcom-geni-serial: drop the return value from handle_rx
tty: serial: qcom-geni-serial: use of_device_id data
soc: qcom-geni-se: add more symbol definitions
tty: serial: qcom-geni-serial: add support for serial engine DMA
Basheer Ahmed Muddebihal (1):
fpga: dfl: Add DFHv1 Register Definitions
Bin Meng (3):
serial: earlycon-arm-semihost: Move smh_putc() variants in respective arch's semihost.h
riscv: Implement semihost.h for earlycon semihost driver
serial: Rename earlycon semihost driver
Brian King (6):
hvcs: Fix hvcs port reference counting
hvcs: Use dev_groups to manage hvcs device attributes
hvcs: Use driver groups to manage driver attributes
hvcs: Get reference to tty in remove
hvcs: Use vhangup in hotplug remove
hvcs: Synchronize hotplug remove with port free
Christoph Niedermaier (4):
dt-bindings: serial: rs485: Add GPIO controlling RX enable during TX
serial: core: Add option to output RS485 RX_DURING_TX state via GPIO
serial: imx: Add support for RS485 RX_DURING_TX output GPIO
serial: stm32: Add support for rs485 RX_DURING_TX output GPIO
Christophe JAILLET (1):
serial: sccnxp: Use devm_clk_get_enabled() helper
Conor Dooley (1):
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
Daniel Starke (4):
tty: n_gsm: mark unusable ioctl structure fields accordingly
tty: n_gsm: add RING/CD control support
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add keep alive support
Elliot Berman (1):
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
Gabriel Somlo (14):
serial: liteuart: use KBUILD_MODNAME as driver name
serial: liteuart: use bit number macros
serial: liteuart: remove unused uart_ops stubs
serial: liteuart: don't set unused port fields
serial: liteuart: minor style fix in liteuart_init()
serial: liteuart: move tty_flip_buffer_push() out of rx loop
serial: liteuart: rx loop should only ack rx events
serial: liteuart: simplify passing of uart_insert_char() flag
serial: liteuart: clean up rx loop variables
serial: liteuart: separate rx loop from poll timer
serial: liteuart: move function definitions
serial: liteuart: add IRQ support for the RX path
serial: liteuart: add IRQ support for the TX path
serial: liteuart: move polling putchar() function
Greg Kroah-Hartman (3):
Merge 6.2-rc5 into tty-next
Merge 6.2-rc7 into tty-next
tty: pcn_uart: fix memory leak with using debugfs_lookup()
Ilpo Järvinen (20):
serial: 8250: Use defined IER bits
serial: 8250: Name MSR literals
serial: 8250: Cleanup MCR literals
serial: 8250: Add IIR FIFOs enabled field properly
serial: 8250: Define IIR 64 byte bit & cleanup related code
serial: 8250_early: Convert literals to use defines
tty: Cleanup tty_port_set_initialized() bool parameter
tty: Cleamup tty_port_set_suspended() bool parameter
tty: Cleanup tty_port_set_active() bool parameter
tty: moxa: Make local var storing tty_port_initialized() bool
serial: Convert uart_{,port_}startup() init_hw param to bool
tty: Convert ->carrier_raised() and callchains to bool
tty: Convert ->dtr_rts() to take bool argument
tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool active
serial: Make uart_handle_cts_change() status param bool active
tty: Return bool from tty_termios_hw_change()
tty: Call ->dtr_rts() parameter active consistently
tty: moxa: Rename dtr/rts parameters/variables to active
serial: qcom_geni: Fix variable naming
serial: liteuart: Correct error rollback
Isaac True (1):
serial: sc16is7xx: setup GPIO controller later in probe
Jean Delvare (1):
serial: liteuart: drop obsolete dependency on COMPILE_TEST
Jiri Slaby (SUSE) (11):
tty: vt: remove vc_uniscr_debug_check()
tty: vt: drop get_vc_uniscr()
tty: vt: remove reference to undefined NO_VC_UNI_SCREEN
tty: vt: use sizeof(*variable) where possible
tty: vt: remove char32_t typedef
tty: vt: remove struct uni_screen
tty: vt: replace BUG_ON() by WARN_ON_ONCE()
tty: vt: simplify some unicode conditions
tty: vt: separate array juggling to juggle_array()
tty: vt: saner names for more scroll variables
tty: vt: cache row count in con_scroll()
Krzysztof Kozlowski (14):
dt-bindings: serial: qcom,msm-uart: Convert to DT schema
serial: msm: add lock annotation to msm_set_baud_rate()
dt-bindings: serial: amlogic,meson-uart: allow other serial properties
dt-bindings: serial: 8250: correct Nuvoton NPCM850 compatible
dt-bindings: serial: pl011: allow ARM Primecell properties
dt-bindings: serial: correct ref to serial.yaml
dt-bindings: serial: cdsn,uart: add power-domains
dt-bindings: serial: 8250_omap: drop rs485 properties
dt-bindings: serial: fsl-imx-uart: drop common properties
dt-bindings: serial: fsl-lpuart: drop rs485 properties
dt-bindings: serial: fsl-lpuart: allow other serial properties
dt-bindings: serial: st,stm32-uart: drop common properties
dt-bindings: serial: drop unneeded quotes
dt-bindings: serial: example cleanup
Kumaravel Thiagarajan (4):
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
Liang He (1):
serial: ucc_uart: Add of_node_put() in ucc_uart_remove()
Matthew Gerlach (3):
Documentation: fpga: dfl: Add documentation for DFHv1
fpga: dfl: add basic support for DFHv1
tty: serial: 8250: add DFL bus driver for Altera 16550.
Nate Drude (1):
tty: serial: fsl_lpuart: increase maximum uart_nr to eight
Peng Fan (1):
tty: serial: imx: disable Ageing Timer interrupt request irq
Ricardo Ribalda (2):
earlycon: Let users set the clock frequency
earlycon: Increase options size
Rob Herring (1):
dt-bindings: serial: 8250: Fix 'aspeed,lpc-io-reg' differing types
Samuel Thibault (3):
VT: Add height parameter to con_font_get/set consw operations
VT: Add KD_FONT_OP_SET/GET_TALL operations
VT: Bump font size limitation to 64x128 pixels
Sergey Organov (8):
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: imx: work-around for hardware RX flood
serial: imx: do not sysrq broken chars
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: refine local variables in rxint()
serial: imx: get rid of registers shadowing
Shenwei Wang (1):
serial: fsl_lpuart: fix RS485 RTS polariy inverse issue
Sherry Sun (13):
tty: serial: fsl_lpuart: only enable Idle Line Interrupt for non-dma case
tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()
tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown()
tty: serial: fsl_lpuart: disable the CTS when send break signal
tty: serial: fsl_lpuart: disable the break condition when shutdown the uart port
tty: serial: imx: disable the break condition when shutdown the uart port
tty: serial: fsl_lpuart: don't enable receiver/transmitter before rx/tx dma ready
tty: serial: fsl_lpuart: make rx_watermark configurable for different platforms
tty: serial: fsl_lpuart: set receive watermark for imx8qxp platform
tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case
tty: serial: fsl_lpuart: Enable Receiver Idle Empty function for LPUART
tty: serial: fsl_lpuart: set RTS watermark for lpuart
tty: serial: fsl_lpuart: add imx8ulp support
Sven Schnelle (2):
tty: fix out-of-bounds access in tty_driver_lookup_tty()
tty/vt: prevent registration of console with invalid number
Tom Rix (1):
serial: imx: remove a redundant check
Uwe Kleine-König (1):
serial: 8250: Fix mismerge regarding serial_lsr_in()
Yi Yang (1):
serial: tegra: Add missing clk_disable_unprepare() in tegra_uart_hw_init()
Yuan Can (1):
serial: pic32: Add checks for devm_clk_get() in pic32_uart_probe()
Documentation/admin-guide/kernel-parameters.txt | 12 +-
Documentation/devicetree/bindings/serial/8250.yaml | 10 +-
.../devicetree/bindings/serial/8250_omap.yaml | 23 +-
.../bindings/serial/amlogic,meson-uart.yaml | 15 +-
.../devicetree/bindings/serial/cdns,uart.yaml | 27 +-
.../bindings/serial/fsl,s32-linflexuart.yaml | 2 +-
.../devicetree/bindings/serial/fsl-imx-uart.yaml | 11 +-
.../devicetree/bindings/serial/fsl-lpuart.yaml | 6 +-
.../devicetree/bindings/serial/fsl-mxs-auart.yaml | 2 +-
.../devicetree/bindings/serial/pl011.yaml | 1 +
.../devicetree/bindings/serial/qcom,msm-uart.txt | 25 -
.../devicetree/bindings/serial/qcom,msm-uart.yaml | 56 ++
.../bindings/serial/renesas,em-uart.yaml | 10 +-
.../devicetree/bindings/serial/renesas,hscif.yaml | 26 +-
.../devicetree/bindings/serial/renesas,sci.yaml | 24 +-
.../devicetree/bindings/serial/renesas,scif.yaml | 24 +-
.../devicetree/bindings/serial/renesas,scifa.yaml | 22 +-
.../devicetree/bindings/serial/renesas,scifb.yaml | 12 +-
.../devicetree/bindings/serial/rs485.yaml | 6 +
.../devicetree/bindings/serial/serial.yaml | 18 +-
.../devicetree/bindings/serial/sifive-serial.yaml | 6 +-
.../bindings/serial/snps-dw-apb-uart.yaml | 8 +
.../devicetree/bindings/serial/st,stm32-uart.yaml | 7 -
.../bindings/serial/xlnx,opb-uartlite.yaml | 6 +-
Documentation/driver-api/tty/n_gsm.rst | 19 +
Documentation/fpga/dfl.rst | 119 ++++
MAINTAINERS | 7 +
arch/arm/include/asm/semihost.h | 30 +
arch/arm64/include/asm/semihost.h | 24 +
arch/riscv/include/asm/semihost.h | 26 +
drivers/char/pcmcia/synclink_cs.c | 18 +-
drivers/fpga/dfl.c | 245 ++++++--
drivers/fpga/dfl.h | 43 ++
drivers/i2c/busses/i2c-qcom-geni.c | 2 +-
drivers/ipack/devices/ipoctal.c | 4 +-
drivers/mmc/core/sdio_uart.c | 13 +-
drivers/pps/clients/pps-ldisc.c | 6 +-
drivers/s390/char/con3215.c | 4 +-
drivers/soc/qcom/qcom-geni-se.c | 2 +-
drivers/spi/spi-geni-qcom.c | 2 +-
drivers/staging/greybus/uart.c | 4 +-
drivers/tty/amiserial.c | 12 +-
drivers/tty/hvc/hvc_console.c | 4 +-
drivers/tty/hvc/hvc_console.h | 2 +-
drivers/tty/hvc/hvc_iucv.c | 6 +-
drivers/tty/hvc/hvcs.c | 91 ++-
drivers/tty/moxa.c | 82 +--
drivers/tty/mxser.c | 11 +-
drivers/tty/n_gsm.c | 160 +++++-
drivers/tty/serial/8250/8250_dfl.c | 167 ++++++
drivers/tty/serial/8250/8250_early.c | 4 +-
drivers/tty/serial/8250/8250_pci.c | 25 +-
drivers/tty/serial/8250/8250_pci1xxxx.c | 494 ++++++++++++++++
drivers/tty/serial/8250/8250_pcilib.c | 40 ++
drivers/tty/serial/8250/8250_pcilib.h | 15 +
drivers/tty/serial/8250/8250_port.c | 57 +-
drivers/tty/serial/8250/Kconfig | 27 +
drivers/tty/serial/8250/Makefile | 3 +
drivers/tty/serial/Kconfig | 16 +-
drivers/tty/serial/Makefile | 2 +-
...earlycon-arm-semihost.c => earlycon-semihost.c} | 25 +-
drivers/tty/serial/earlycon.c | 9 +-
drivers/tty/serial/fsl_lpuart.c | 119 +++-
drivers/tty/serial/imx.c | 308 +++++-----
drivers/tty/serial/liteuart.c | 241 ++++----
drivers/tty/serial/max3100.c | 2 +-
drivers/tty/serial/max310x.c | 3 +-
drivers/tty/serial/msm_serial.c | 1 +
drivers/tty/serial/pch_uart.c | 2 +-
drivers/tty/serial/pic32_uart.c | 2 +
drivers/tty/serial/qcom_geni_serial.c | 638 ++++++++++++++-------
drivers/tty/serial/sc16is7xx.c | 51 +-
drivers/tty/serial/sccnxp.c | 12 +-
drivers/tty/serial/serial-tegra.c | 7 +-
drivers/tty/serial/serial_core.c | 77 +--
drivers/tty/serial/stm32-usart.c | 6 +-
drivers/tty/serial/sunhv.c | 8 +-
drivers/tty/serial/ucc_uart.c | 2 +
drivers/tty/synclink_gt.c | 21 +-
drivers/tty/tty_io.c | 8 +-
drivers/tty/tty_ioctl.c | 8 +-
drivers/tty/tty_port.c | 22 +-
drivers/tty/vt/vt.c | 310 +++++-----
drivers/usb/class/cdc-acm.c | 4 +-
drivers/usb/serial/console.c | 2 +-
drivers/usb/serial/usb-serial.c | 6 +-
drivers/video/console/newport_con.c | 9 +-
drivers/video/console/sticon.c | 9 +-
drivers/video/console/vgacon.c | 8 +-
drivers/video/fbdev/core/fbcon.c | 35 +-
include/linux/console.h | 5 +-
include/linux/console_struct.h | 3 +-
include/linux/dfl.h | 8 +
include/linux/serial.h | 10 +
include/linux/serial_core.h | 9 +-
.../linux/{qcom-geni-se.h => soc/qcom/geni-se.h} | 3 +
include/linux/tty.h | 2 +-
include/linux/tty_ldisc.h | 4 +-
include/linux/tty_port.h | 10 +-
include/uapi/linux/gsmmux.h | 17 +-
include/uapi/linux/kd.h | 10 +-
include/uapi/linux/serial_core.h | 3 +
include/uapi/linux/serial_reg.h | 5 +
net/bluetooth/rfcomm/tty.c | 2 +-
104 files changed, 2908 insertions(+), 1283 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serial/qcom,msm-uart.txt
create mode 100644 Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml
create mode 100644 arch/arm/include/asm/semihost.h
create mode 100644 arch/arm64/include/asm/semihost.h
create mode 100644 arch/riscv/include/asm/semihost.h
create mode 100644 drivers/tty/serial/8250/8250_dfl.c
create mode 100644 drivers/tty/serial/8250/8250_pci1xxxx.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.c
create mode 100644 drivers/tty/serial/8250/8250_pcilib.h
rename drivers/tty/serial/{earlycon-arm-semihost.c => earlycon-semihost.c} (57%)
rename include/linux/{qcom-geni-se.h => soc/qcom/geni-se.h} (99%)
Powered by blists - more mailing lists