| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230227211651.GA896532-robh@kernel.org>
Date: Mon, 27 Feb 2023 15:16:51 -0600
From: Rob Herring <robh@...nel.org>
To: "Peng Fan (OSS)" <peng.fan@....nxp.com>
Cc: gregkh@...uxfoundation.org, krzysztof.kozlowski+dt@...aro.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, xu.yang_2@....com,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
jun.li@....com, Peng Fan <peng.fan@....com>
Subject: Re: [PATCH V3 4/7] dt-bindings: usb: ci-hdrc-usb2: convert to DT
schema format
On Sun, Feb 26, 2023 at 09:05:36PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@....com>
>
> Convert the binding to DT schema format. To fix the dtbs_check
> error, some properties were also added, such as nvidia,phy, reset-names
> ulpi.
>
> Signed-off-by: Peng Fan <peng.fan@....com>
> ---
> .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 159 -------
> .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 408 ++++++++++++++++++
> 2 files changed, 408 insertions(+), 159 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
> create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
[...]
> diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> new file mode 100644
> index 000000000000..b30ed11fa22f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml
> @@ -0,0 +1,408 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/ci-hdrc-usb2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: USB2 ChipIdea USB controller for ci13xxx Binding
Drop ' for ci13xxx Binding'
> +
> +maintainers:
> + - Xu Yang <xu.yang_2@....com>
> + - Peng Fan <peng.fan@....com>
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - chipidea,usb2
> + - fsl,imx7ulp-usb
> + - lsi,zevio-usb
> + - nvidia,tegra20-udc
> + - nvidia,tegra30-udc
> + - nvidia,tegra114-udc
> + - nvidia,tegra124-udc
> + - qcom,ci-hdrc
> + - items:
> + - enum:
> + - fsl,imx23-usb
> + - fsl,imx25-usb
> + - fsl,imx28-usb
> + - fsl,imx6q-usb
> + - fsl,imx6sl-usb
> + - fsl,imx6sx-usb
> + - fsl,imx6ul-usb
> + - fsl,imx7d-usb
> + - const: fsl,imx27-usb
> + - items:
> + - const: fsl,imx8mm-usb
> + - const: fsl,imx7d-usb
But not compatible with imx27?
> + - items:
> + - const: fsl,imx7ulp-usb
> + - const: fsl,imx6ul-usb
> + - items:
> + - const: xlnx,zynq-usb-2.20a
> + - const: chipidea,usb2
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
Defined in usb-hcd.yaml, so drop.
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> +
> + interrupts:
> + minItems: 1
> + maxItems: 2
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + minItems: 1
> + maxItems: 2
> +
> + dr_mode: true
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + maxItems: 1
> +
> + "#reset-cells":
> + const: 1
> +
> + phy_type: true
> +
> + itc-setting:
> + description:
> + interrupt threshold control register control, the setting should be
> + aligned with ITC bits at register USBCMD.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> + ahb-burst-config:
> + description:
> + it is vendor dependent, the required value should be aligned with
> + AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
> + used to change AHB burst configuration, check the chipidea spec for
> + meaning of each value. If this property is not existed, it will use
> + the reset value.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0x0
> + maximum: 0x7
> +
> + tx-burst-size-dword:
> + description:
> + it is vendor dependent, the tx burst size in dword (4 bytes), This
> + register represents the maximum length of a the burst in 32-bit
> + words while moving data from system memory to the USB bus, the value
> + of this property will only take effect if property "ahb-burst-config"
> + is set to 0, if this property is missing the reset default of the
> + hardware implementation will be used.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0x0
> + maximum: 0x20
> +
> + rx-burst-size-dword:
> + description:
> + it is vendor dependent, the rx burst size in dword (4 bytes), This
> + register represents the maximum length of a the burst in 32-bit words
> + while moving data from the USB bus to system memory, the value of
> + this property will only take effect if property "ahb-burst-config"
> + is set to 0, if this property is missing the reset default of the
> + hardware implementation will be used.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0x0
> + maximum: 0x20
> +
> + extcon:
> + description: |
> + Phandles to external connector devices. First phandle should point
> + to external connector, which provide "USB" cable events, the second
> + should point to external connector device, which provide "USB-HOST"
> + cable events. If one of the external connector devices is not
> + required, empty <0> phandle should be specified.
> +
> + phy-clkgate-delay-us:
> + description: |
> + The delay time (us) between putting the PHY into low power mode and
> + gating the PHY clock.
> +
> + non-zero-ttctrl-ttha:
> + description: |
> + After setting this property, the value of register ttctrl.ttha
> + will be 0x7f; if not, the value will be 0x0, this is the default
> + value. It needs to be very carefully for setting this property, it
> + is recommended that consult with your IC engineer before setting
> + this value. On the most of chipidea platforms, the "usage_tt" flag
> + at RTL is 0, so this property only affects siTD.
> +
> + If this property is not set, the max packet size is 1023 bytes, and
> + if the total of packet size for pervious transactions are more than
> + 256 bytes, it can't accept any transactions within this frame. The
> + use case is single transaction, but higher frame rate.
> +
> + If this property is set, the max packet size is 188 bytes, it can
> + handle more transactions than above case, it can accept transactions
> + until it considers the left room size within frame is less than 188
> + bytes, software needs to make sure it does not send more than 90%
> + maximum_periodic_data_per_frame. The use case is multiple
> + transactions, but less frame rate.
> +
> + mux-controls:
> + description: |
> + The mux control for toggling host/device output of this controller.
> + It's expected that a mux state of 0 indicates device mode and a mux
> + state of 1 indicates host mode.
> + maxItems: 1
> +
> + mux-control-names:
> + const: usb_switch
> +
> + pinctrl-names:
> + description: |
> + Names for optional pin modes in "default", "host", "device".
> + In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
> + In this case, the "idle" state needs to pull down the data and
> + strobe pin and the "active" state needs to pull up the strobe pin.
items:
enum: [ default, host, device, idle, active ]
> +
> + pinctrl-0:
> + maxItems: 1
> +
> + pinctrl-1:
> + maxItems: 1
> +
> + phys:
> + maxItems: 1
> +
> + phy-names:
> + const: usb-phy
> +
> + vbus-supply:
> + description: reference to the VBUS regulator.
> +
> + fsl,usbmisc:
> + description:
> + Phandler of non-core register device, with one argument that
> + indicate usb controller index
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to usbmisc node
> + - description: index of usb controller
> +
> + fsl,anatop:
> + description: phandle for the anatop node.
> + $ref: /schemas/types.yaml#/definitions/phandle
> +
> + disable-over-current:
> + type: boolean
> + description: disable over current detect
> +
> + over-current-active-low:
> + type: boolean
> + description: over current signal polarity is active low
> +
> + over-current-active-high:
> + type: boolean
> + description: |
> + Over current signal polarity is active high. It's recommended to
> + specify the over current polarity.
> +
> + power-active-high:
> + type: boolean
> + description: power signal polarity is active high
> +
> + external-vbus-divider:
> + type: boolean
> + description: enables off-chip resistor divider for Vbus
> +
> + samsung,picophy-pre-emp-curr-control:
> + description: |
> + HS Transmitter Pre-Emphasis Current Control. This signal controls
> + the amount of current sourced to the USB_OTG*_DP and USB_OTG*_DN
> + pins after a J-to-K or K-to-J transition. The range is from 0x0 to
> + 0x3, the default value is 0x1. Details can refer to TXPREEMPAMPTUNE0
> + bits of USBNC_n_PHY_CFG1.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0x0
> + maximum: 0x3
> +
> + samsung,picophy-dc-vol-level-adjust:
> + description: |
> + HS DC Voltage Level Adjustment. Adjust the high-speed transmitter DC
> + level voltage. The range is from 0x0 to 0xf, the default value is
> + 0x3. Details can refer to TXVREFTUNE0 bits of USBNC_n_PHY_CFG1.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0x0
> + maximum: 0xf
> +
> + usb-phy:
> + description: phandle for the PHY device. Use "phys" instead.
> + $ref: /schemas/types.yaml#/definitions/phandle
> + deprecated: true
> +
> + fsl,usbphy:
> + description: phandle of usb phy that connects to the port. Use "phys" instead.
> + $ref: /schemas/types.yaml#/definitions/phandle
> + deprecated: true
> +
> + nvidia,phy:
> + description: phandle of usb phy that connects to the port. Use "phys" instead.
> + $ref: /schemas/types.yaml#/definitions/phandle
deprecated: true
> +
> + port:
> + description:
> + Any connector to the data bus of this controller should be modelled
> + using the OF graph bindings specified, if the "usb-role-switch"
> + property is used.
> + $ref: /schemas/graph.yaml#/properties/port
> +
> + reset-gpios:
> + maxItems: 1
> +
> + ulpi:
> + type: object
> + properties:
> + phy:
> + description: The phy child node for Qcom chips.
> + type: object
> + $ref: /schemas/phy/qcom,usb-hs-phy.yaml
> +
> +patternProperties:
> + "^.*@[0-9a-f]{1,2}$":
> + description: The hard wired USB devices
> + type: object
> + $ref: /schemas/usb/usb-device.yaml
Defined in usb-hcd.yaml, so drop.
> +
> +dependencies:
> + port: [ usb-role-switch ]
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +allOf:
> + - $ref: usb-hcd.yaml#
> + - $ref: usb-drd.yaml#
> + - if:
> + properties:
> + mux-controls:
> + true
> + then:
> + properties:
> + mux-control-names:
> + const: usb_switch
> + - if:
> + properties:
> + phy_type:
> + const: hsic
> + required:
> + - phy_type
> + then:
> + properties:
> + pinctrl-names:
> + items:
> + - const: idle
> + - const: active
> + else:
> + properties:
> + pinctrl-names:
> + minItems: 1
> + maxItems: 2
> + oneOf:
> + - items:
> + - const: default
> + - enum:
> + - host
> + - device
> + - items:
> + - const: default
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - chipidea,usb2
> + - lsi,zevio-usb
> + - nvidia,tegra20-udc
> + - nvidia,tegra30-udc
> + - nvidia,tegra114-udc
> + - nvidia,tegra124-udc
> + - qcom,ci-hdrc
> + - xlnx,zynq-usb-2.20a
> + then:
> + properties:
> + fsl,usbmisc: false
> + disable-over-current: false
> + over-current-active-low: false
> + over-current-active-high: false
> + power-active-high: false
> + external-vbus-divider: false
> + samsung,picophy-pre-emp-curr-control: false
> + samsung,picophy-dc-vol-level-adjust: false
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/berlin2.h>
> +
> + usb@...d0000 {
> + compatible = "chipidea,usb2";
> + reg = <0xf7ed0000 0x10000>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&chip CLKID_USB0>;
> + phys = <&usb_phy0>;
> + phy-names = "usb-phy";
> + vbus-supply = <®_usb0_vbus>;
> + itc-setting = <0x4>; /* 4 micro-frames */
> + /* Incremental burst of unspecified length */
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x10>; /* 64 bytes */
> + rx-burst-size-dword = <0x10>;
> + extcon = <0>, <&usb_id>;
> + phy-clkgate-delay-us = <400>;
> + mux-controls = <&usb_switch>;
> + mux-control-names = "usb_switch";
> + };
> +
> + # Example for HSIC:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/imx6qdl-clock.h>
> +
> + usb@...4400 {
> + compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
> + reg = <0x02184400 0x200>;
> + interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMX6QDL_CLK_USBOH3>;
> + fsl,usbphy = <&usbphynop1>;
> + fsl,usbmisc = <&usbmisc 2>;
> + phy_type = "hsic";
> + dr_mode = "host";
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x10>;
> + rx-burst-size-dword = <0x10>;
> + pinctrl-names = "idle", "active";
> + pinctrl-0 = <&pinctrl_usbh2_idle>;
> + pinctrl-1 = <&pinctrl_usbh2_active>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethernet@1 {
> + compatible = "usb424,9730";
> + reg = <1>;
> + };
> + };
> +
> +...
> --
> 2.37.1
>
Powered by blists - more mailing lists