Message-Id: <20230227064620.29468-1-zhuyinbo@loongson.cn>
Date:   Mon, 27 Feb 2023 14:46:20 +0800
From:   Yinbo Zhu <zhuyinbo@...ngson.cn>
To:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Huacai Chen <chenhuacai@...nel.org>,
        WANG Xuerui <kernel@...0n.name>,
        Jiaxun Yang <jiaxun.yang@...goat.com>,
        Yang Li <yang.lee@...ux.alibaba.com>,
        linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
        loongarch@...ts.linux.dev
Cc:     Jianmin Lv <lvjianmin@...ngson.cn>,
        Liu Peibao <liupeibao@...ngson.cn>, wanghongliang@...ngson.cn,
        Yinbo Zhu <zhuyinbo@...ngson.cn>
Subject: [PATCH v12 2/4] clk: clk-loongson2: add clock controller driver support

This driver provides support for clock controller on Loongson-2 SoC,
the Loongson-2 SoC uses a 100MHz clock as the PLL reference clock,
there are five independent PLLs inside, each of which PLL can
provide up to three sets of frequency dependent clock outputs.

Signed-off-by: Yinbo Zhu <zhuyinbo@...ngson.cn>
---
Change in v12:
		1. Change driver register way that use platform driver register.
Change in v11:
		1. Remove the repetitive COMMON_CLK config in loongarch Kconfig.
		2. Fixup the help paragraph descprition in COMMON_CLK_LOONGSON2.
		3. Drop the <linux/clkdev.h>.
		4. Drop the cast in clock driver.
		5. Use div_u64() replace do_div().
		6. Inline this function for loongson2_check_clk_hws.
		7. Fixup the comma deposition on the loongson2_check_clk_hws.
		8. Drop the loongson2_obtain_fixed_clk_hw and rework this driver
		   use clk_parent_data and the 'fw_name'.
Change in v10:
		1. Detach of_clk_init to another patch. 
Change in v9:
		1. Add all history changelog information.
Change in v8:
		1. Remove the flag "CLK_IS_BASIC".
Change in v7:
		1. Adjust position alphabetically in Kconfig and Makefile.
		2. Add static for loongson2_pll_base.
		3. Move other file-scope variables in probe.
Change in v6:
		1. NO change, but other patch in this series of patches has
		   changes.
Change in v5:
		1. Replace loongson2 with Loongson-2 in commit info.
		2. Replace Loongson2 with Loongson-2 in binding and
		   Kconfig file.
		3. Replace soc with SoC.
Change in v4:
		1. Fixup clock-names that replace "xxx-clk" with "xxx".
Change in v3:
		1. NO change, but other patch in this series of patches has
		   changes.
Change in v2:
		1. Update the include filename.
		2. Change string from refclk/REFCLK to ref/REF.

 MAINTAINERS                 |   1 +
 drivers/clk/Kconfig         |   9 +
 drivers/clk/Makefile        |   1 +
 drivers/clk/clk-loongson2.c | 337 ++++++++++++++++++++++++++++++++++++
 4 files changed, 348 insertions(+)
 create mode 100644 drivers/clk/clk-loongson2.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 6147c2742563..1901c3230bc0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12090,6 +12090,7 @@ LOONGSON-2 SOC SERIES CLOCK DRIVER
 M:	Yinbo Zhu <zhuyinbo@...ngson.cn>
 L:	linux-clk@...r.kernel.org
 S:	Maintained
+F:	drivers/clk/clk-loongson2.c
 F:	include/dt-bindings/clock/loongson,ls2k-clk.h
 
 LOONGSON GPIO DRIVER
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index b6c5bf69a2b2..27c5fa02916a 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -325,6 +325,15 @@ config COMMON_CLK_LOCHNAGAR
 	  This driver supports the clocking features of the Cirrus Logic
 	  Lochnagar audio development board.
 
+config COMMON_CLK_LOONGSON2
+	bool "Clock driver for Loongson-2 SoC"
+	depends on COMMON_CLK && OF
+	help
+          This driver provides support for clock controller on Loongson-2 SoC.
+          The clock controller can generates and supplies clock to various
+          peripherals within the SoC.
+          Say Y here to support Loongson-2 SoC clock driver.
+
 config COMMON_CLK_NXP
 	def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
 	select REGMAP_MMIO if ARCH_LPC32XX
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e3ca0d058a25..b298c5dabc1a 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_COMMON_CLK_K210)		+= clk-k210.o
 obj-$(CONFIG_LMK04832)			+= clk-lmk04832.o
 obj-$(CONFIG_COMMON_CLK_LAN966X)	+= clk-lan966x.o
 obj-$(CONFIG_COMMON_CLK_LOCHNAGAR)	+= clk-lochnagar.o
+obj-$(CONFIG_COMMON_CLK_LOONGSON2)	+= clk-loongson2.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
 obj-$(CONFIG_COMMON_CLK_MAX9485)	+= clk-max9485.o
 obj-$(CONFIG_ARCH_MILBEAUT_M10V)	+= clk-milbeaut.o
diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
new file mode 100644
index 000000000000..e0f269994327
--- /dev/null
+++ b/drivers/clk/clk-loongson2.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Author: Yinbo Zhu <zhuyinbo@...ngson.cn>
+ * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+#define LOONGSON2_PLL_MULT_SHIFT		32
+#define LOONGSON2_PLL_MULT_WIDTH		10
+#define LOONGSON2_PLL_DIV_SHIFT			26
+#define LOONGSON2_PLL_DIV_WIDTH			6
+#define LOONGSON2_APB_FREQSCALE_SHIFT		20
+#define LOONGSON2_APB_FREQSCALE_WIDTH		3
+#define LOONGSON2_USB_FREQSCALE_SHIFT		16
+#define LOONGSON2_USB_FREQSCALE_WIDTH		3
+#define LOONGSON2_SATA_FREQSCALE_SHIFT		12
+#define LOONGSON2_SATA_FREQSCALE_WIDTH		3
+
+static void __iomem *loongson2_pll_base;
+
+static const struct clk_parent_data pdata[] = {
+	{ .fw_name = "ref_100m", .name = "ref_clk", },
+};
+
+static struct clk_hw *loongson2_clk_register(struct device_node *np,
+					  const char *name,
+					  const char *parent_name,
+					  const struct clk_ops *ops,
+					  unsigned long flags)
+{
+	int ret;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+
+	/* allocate the divider */
+	hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+	if (!hw)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = ops;
+	init.flags = flags;
+	init.num_parents = 1;
+
+	if (!parent_name)
+		init.parent_data = pdata;
+	else
+		init.parent_names = &parent_name;
+
+	hw->init = &init;
+
+	/* register the clock */
+	ret = of_clk_hw_register(np, hw);
+	if (ret) {
+		kfree(hw);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+static unsigned long loongson2_calc_pll_rate(int offset, unsigned long rate)
+{
+	u64 val;
+	u32 mult = 1, div = 1;
+
+	val = readq(loongson2_pll_base + offset);
+
+	mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
+			clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
+	div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
+			clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
+
+	return div_u64((u64)rate * mult, div);
+}
+
+static unsigned long loongson2_node_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_pll_rate(0x0, parent_rate);
+}
+
+static const struct clk_ops loongson2_node_clk_ops = {
+	.recalc_rate = loongson2_node_recalc_rate,
+};
+
+static unsigned long loongson2_ddr_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_pll_rate(0x10, parent_rate);
+}
+
+static const struct clk_ops loongson2_ddr_clk_ops = {
+	.recalc_rate = loongson2_ddr_recalc_rate,
+};
+
+static unsigned long loongson2_dc_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_pll_rate(0x20, parent_rate);
+}
+
+static const struct clk_ops loongson2_dc_clk_ops = {
+	.recalc_rate = loongson2_dc_recalc_rate,
+};
+
+static unsigned long loongson2_pix0_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_pll_rate(0x30, parent_rate);
+}
+
+static const struct clk_ops loongson2_pix0_clk_ops = {
+	.recalc_rate = loongson2_pix0_recalc_rate,
+};
+
+static unsigned long loongson2_pix1_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_pll_rate(0x40, parent_rate);
+}
+
+static const struct clk_ops loongson2_pix1_clk_ops = {
+	.recalc_rate = loongson2_pix1_recalc_rate,
+};
+
+static unsigned long loongson2_calc_rate(unsigned long rate,
+					 int shift, int width)
+{
+	u64 val;
+	u32 mult;
+
+	val = readq(loongson2_pll_base + 0x50);
+
+	mult = (val >> shift) & clk_div_mask(width);
+
+	return div_u64((u64)rate * (mult + 1), 8);
+}
+
+static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_rate(parent_rate,
+				   LOONGSON2_APB_FREQSCALE_SHIFT,
+				   LOONGSON2_APB_FREQSCALE_WIDTH);
+}
+
+static const struct clk_ops loongson2_apb_clk_ops = {
+	.recalc_rate = loongson2_apb_recalc_rate,
+};
+
+static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_rate(parent_rate,
+				   LOONGSON2_USB_FREQSCALE_SHIFT,
+				   LOONGSON2_USB_FREQSCALE_WIDTH);
+}
+
+static const struct clk_ops loongson2_usb_clk_ops = {
+	.recalc_rate = loongson2_usb_recalc_rate,
+};
+
+static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	return loongson2_calc_rate(parent_rate,
+				   LOONGSON2_SATA_FREQSCALE_SHIFT,
+				   LOONGSON2_SATA_FREQSCALE_WIDTH);
+}
+
+static const struct clk_ops loongson2_sata_clk_ops = {
+	.recalc_rate = loongson2_sata_recalc_rate,
+};
+
+static inline void loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
+{
+	unsigned int i;
+
+	for (i = 0; i < count; i++)
+		if (IS_ERR(clks[i]))
+			pr_err("Loongson2 clk %u: register failed with %ld\n",
+				i, PTR_ERR(clks[i]));
+}
+
+static void loongson2_clocks_init(struct device_node *np)
+{
+	struct clk_hw **hws;
+	struct clk_hw_onecell_data *clk_hw_data;
+	spinlock_t loongson2_clk_lock;
+
+	loongson2_pll_base = of_iomap(np, 0);
+
+	if (!loongson2_pll_base) {
+		pr_err("clk: unable to map loongson2 clk registers\n");
+		return;
+	}
+
+	clk_hw_data = kzalloc(struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
+					GFP_KERNEL);
+	if (WARN_ON(!clk_hw_data))
+		goto err;
+
+	clk_hw_data->num = LOONGSON2_CLK_END;
+	hws = clk_hw_data->hws;
+
+	hws[LOONGSON2_NODE_PLL] = loongson2_clk_register(np, "node_pll",
+						NULL,
+						&loongson2_node_clk_ops, 0);
+
+	hws[LOONGSON2_DDR_PLL] = loongson2_clk_register(np, "ddr_pll",
+						NULL,
+						&loongson2_ddr_clk_ops, 0);
+
+	hws[LOONGSON2_DC_PLL] = loongson2_clk_register(np, "dc_pll",
+						NULL,
+						&loongson2_dc_clk_ops, 0);
+
+	hws[LOONGSON2_PIX0_PLL] = loongson2_clk_register(np, "pix0_pll",
+						NULL,
+						&loongson2_pix0_clk_ops, 0);
+
+	hws[LOONGSON2_PIX1_PLL] = loongson2_clk_register(np, "pix1_pll",
+						NULL,
+						&loongson2_pix1_clk_ops, 0);
+
+	hws[LOONGSON2_NODE_CLK] = clk_hw_register_divider(NULL, "node",
+						"node_pll", 0,
+						loongson2_pll_base + 0x8, 0,
+						6, CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	/*
+	 * The hda clk divisor in the upper 32bits and the clk-prodiver
+	 * layer code doesn't support 64bit io operation thus a conversion
+	 * is required that subtract shift by 32 and add 4byte to the hda
+	 * address
+	 */
+	hws[LOONGSON2_HDA_CLK] = clk_hw_register_divider(NULL, "hda",
+						"ddr_pll", 0,
+						loongson2_pll_base + 0x22, 12,
+						7, CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	hws[LOONGSON2_GPU_CLK] = clk_hw_register_divider(NULL, "gpu",
+						"ddr_pll", 0,
+						loongson2_pll_base + 0x18, 22,
+						6, CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	hws[LOONGSON2_DDR_CLK] = clk_hw_register_divider(NULL, "ddr",
+						"ddr_pll", 0,
+						loongson2_pll_base + 0x18, 0,
+						6, CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	hws[LOONGSON2_GMAC_CLK] = clk_hw_register_divider(NULL, "gmac",
+						"dc_pll", 0,
+						loongson2_pll_base + 0x28, 22,
+						6, CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	hws[LOONGSON2_DC_CLK] = clk_hw_register_divider(NULL, "dc",
+						"dc_pll", 0,
+						loongson2_pll_base + 0x28, 0,
+						6, CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	hws[LOONGSON2_APB_CLK] = loongson2_clk_register(NULL, "apb",
+						"gmac",
+						&loongson2_apb_clk_ops, 0);
+
+	hws[LOONGSON2_USB_CLK] = loongson2_clk_register(NULL, "usb",
+						"gmac",
+						&loongson2_usb_clk_ops, 0);
+
+	hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(NULL, "sata",
+						"gmac",
+						&loongson2_sata_clk_ops, 0);
+
+	hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
+						"pix0_pll", 0,
+						loongson2_pll_base + 0x38, 0, 6,
+						CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
+						"pix1_pll", 0,
+						loongson2_pll_base + 0x48, 0, 6,
+						CLK_DIVIDER_ONE_BASED,
+						&loongson2_clk_lock);
+
+	loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
+
+	of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_hw_data);
+
+err:
+	iounmap(loongson2_pll_base);
+}
+
+static const struct of_device_id loongson2_clk_match_table[] = {
+	{ .compatible = "loongson,ls2k-clk" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, loongson2_clk_match_table);
+
+static int loongson2_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+
+	loongson2_clocks_init(np);
+
+	return 0;
+}
+
+static struct platform_driver loongson2_clk_driver = {
+	.probe	= loongson2_clk_probe,
+	.driver	= {
+		.name	= "loongson2-clk",
+		.of_match_table	= loongson2_clk_match_table,
+	},
+};
+module_platform_driver(loongson2_clk_driver);
+
+MODULE_DESCRIPTION("Loongson2 clock driver");
+MODULE_LICENSE("GPL");
-- 
2.31.1

Powered by blists - more mailing lists