linux-kernel - Re: [PATCH v2 09/13] ARM: dts: qcom: sdx55-t55: Enable PCIe RC support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 27 Feb 2023 09:47:11 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
        andersson@...nel.org, lpieralisi@...nel.org, robh@...nel.org,
        kw@...ux.com, krzysztof.kozlowski+dt@...aro.org, vkoul@...nel.org
Cc:     bhelgaas@...gle.com, kishon@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v2 09/13] ARM: dts: qcom: sdx55-t55: Enable PCIe RC
 support



On 24.02.2023 11:59, Manivannan Sadhasivam wrote:
> Enable PCIe RC support on Thundercomm T55 board.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm/boot/dts/qcom-sdx55-t55.dts | 42 ++++++++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts
> index 7ed8feb99afb..6339af791b0b 100644
> --- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
> +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
> @@ -242,6 +242,23 @@ &ipa {
>  	memory-region = <&ipa_fw_mem>;
>  };
>  
> +&pcie_phy {
> +	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
> +	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
> +
> +	status = "okay";
> +};
> +
> +&pcie_rc {
> +	perst-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
> +	wake-gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
> +
> +	pinctrl-0 = <&pcie_default>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};
> +
>  &qpic_bam {
>  	status = "ok";
>  };
> @@ -265,6 +282,31 @@ &remoteproc_mpss {
>  	memory-region = <&mpss_adsp_mem>;
>  };
>  
> +&tlmm {
> +	pcie_default: pcie-default-state {
> +		clkreq-pins {
> +			pins = "gpio56";
> +			function = "pcie_clkreq";
> +			drive-strength = <2>;
> +			bias-pull-up;
> +		};
> +
> +		perst-pins {
> +			pins = "gpio57";
> +			function = "gpio";
> +			drive-strength = <2>;
> +			bias-pull-down;
> +		};
> +
> +		wake-pins {
> +		       pins = "gpio53";
> +		       function = "gpio";
> +		       drive-strength = <2>;
> +		       bias-pull-up;
> +	       };
> +	};
> +};
> +
>  &usb_hsphy {
>  	status = "okay";
>  	vdda-pll-supply = <&vreg_l4e_bb_0p875>;