linux-kernel - Re: [PATCH v3 04/15] drm/msm/a6xx: Extend and explain UBWC config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <487a6890-4b8f-d541-e074-5d3ab7424678@linaro.org>
Date:   Tue, 28 Feb 2023 21:40:16 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Akhil P Oommen <quic_akhilpo@...cinc.com>,
        Rob Clark <robdclark@...il.com>,
        Abhinav Kumar <quic_abhinavk@...cinc.com>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Sean Paul <sean@...rly.run>, David Airlie <airlied@...il.com>,
        Daniel Vetter <daniel@...ll.ch>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>
Cc:     linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Rob Clark <robdclark@...omium.org>
Subject: Re: [PATCH v3 04/15] drm/msm/a6xx: Extend and explain UBWC config



On 28.02.2023 21:23, Akhil P Oommen wrote:
> On 2/23/2023 5:36 PM, Konrad Dybcio wrote:
>> Rename lower_bit to hbb_lo and explain what it signifies.
>> Add explanations (wherever possible to other tunables).
>>
>> Sort the variable definition and assignment alphabetically.
> Sorting based on decreasing order of line length is more readable, isn't it?
I can do that.

>>
>> Port setting min_access_length, ubwc_mode and hbb_hi from downstream.
>> Set default values for all of the tunables to zero, as they should be.
>>
>> Values were validated against downstream and will be fixed up in
>> separate commits so as not to make this one even more messy.
>>
>> A618 remains untouched (left at hw defaults) in this patch.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
>> ---
>>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 55 ++++++++++++++++++++++++++++-------
>>  1 file changed, 45 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> index c5f5d0bb3fdc..bdae341e0a7c 100644
>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
>> @@ -786,39 +786,74 @@ static void a6xx_set_cp_protect(struct msm_gpu *gpu)
>>  static void a6xx_set_ubwc_config(struct msm_gpu *gpu)
>>  {
>>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
>> -	u32 lower_bit = 2;
>> +	/* Unknown, introduced with A640/680 */
>>  	u32 amsbc = 0;
>> +	/*
>> +	 * The Highest Bank Bit value represents the bit of the highest DDR bank.
>> +	 * We then subtract 13 from it (13 is the minimum value allowed by hw) and
>> +	 * write the lowest two bits of the remaining value as hbb_lo and the
>> +	 * one above it as hbb_hi to the hardware. The default values (when HBB is
>> +	 * not specified) are 0, 0.
>> +	 */
>> +	u32 hbb_hi = 0;
>> +	u32 hbb_lo = 0;
>> +	/* Whether the minimum access length is 64 bits */
>> +	u32 min_acc_len = 0;
>> +	/* Unknown, introduced with A650 family, related to UBWC mode/ver 4 */
>>  	u32 rgb565_predicator = 0;
>> +	/* Unknown, introduced with A650 family */
>>  	u32 uavflagprd_inv = 0;
>> +	/* Entirely magic, per-GPU-gen value */
>> +	u32 ubwc_mode = 0;
>>  
>>  	/* a618 is using the hw default values */
>>  	if (adreno_is_a618(adreno_gpu))
>>  		return;
>>  
>> -	if (adreno_is_a640_family(adreno_gpu))
>> +	if (adreno_is_a619(adreno_gpu)) {
>> +		/* HBB = 14 */
>> +		hbb_lo = 1;
>> +	}
>> +
>> +	if (adreno_is_a630(adreno_gpu)) {
>> +		/* HBB = 15 */
>> +		hbb_lo = 2;
>> +	}
>> +
>> +	if (adreno_is_a640_family(adreno_gpu)) {
>>  		amsbc = 1;
>> +		/* HBB = 15 */
>> +		hbb_lo = 2;
>> +	}
>>  
>>  	if (adreno_is_a650(adreno_gpu) || adreno_is_a660(adreno_gpu)) {
>> -		/* TODO: get ddr type from bootloader and use 2 for LPDDR4 */
>> -		lower_bit = 3;
>>  		amsbc = 1;
>> +		/* TODO: get ddr type from bootloader and use 2 for LPDDR4 */
>> +		/* HBB = 16 */
>> +		hbb_lo = 3;
>>  		rgb565_predicator = 1;
>>  		uavflagprd_inv = 2;
>>  	}
>>  
>>  	if (adreno_is_7c3(adreno_gpu)) {
>> -		lower_bit = 1;
>>  		amsbc = 1;
>> +		/* HBB is unset in downstream DTS, defaulting to 0 */
> This is incorrect. For 7c3 hbb value is 14. So hbb_lo should be 1. FYI, hbb configurations were moved to the driver from DT in recent downstream kernels.
Right, seems to have happened with msm-5.10. Though a random kernel I
grabbed seems to suggest it's 15 and not 14?

https://github.com/sonyxperiadev/kernel/blob/aosp/K.P.1.0.r1/drivers/gpu/msm/adreno-gpulist.h#L1710

Konrad
> 
> -Akhil.
>>  		rgb565_predicator = 1;
>>  		uavflagprd_inv = 2;
>>  	}
>>  
>>  	gpu_write(gpu, REG_A6XX_RB_NC_MODE_CNTL,
>> -		rgb565_predicator << 11 | amsbc << 4 | lower_bit << 1);
>> -	gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, lower_bit << 1);
>> -	gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL,
>> -		uavflagprd_inv << 4 | lower_bit << 1);
>> -	gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, lower_bit << 21);
>> +		  rgb565_predicator << 11 | hbb_hi << 10 | amsbc << 4 |
>> +		  min_acc_len << 3 | hbb_lo << 1 | ubwc_mode);
>> +
>> +	gpu_write(gpu, REG_A6XX_TPL1_NC_MODE_CNTL, hbb_hi << 4 |
>> +		  min_acc_len << 3 | hbb_lo << 1 | ubwc_mode);
>> +
>> +	gpu_write(gpu, REG_A6XX_SP_NC_MODE_CNTL, hbb_hi << 10 |
>> +		  uavflagprd_inv << 4 | min_acc_len << 3 |
>> +		  hbb_lo << 1 | ubwc_mode);
>> +
>> +	gpu_write(gpu, REG_A6XX_UCHE_MODE_CNTL, min_acc_len << 23 | hbb_lo << 21);
>>  }
>>  
>>  static int a6xx_cp_init(struct msm_gpu *gpu)
>>
>