lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y/9V71ZYy7FGiK4g@orome>
Date:   Wed, 1 Mar 2023 14:41:03 +0100
From:   Thierry Reding <thierry.reding@...il.com>
To:     Krishna Yarlagadda <kyarlagadda@...dia.com>
Cc:     robh+dt@...nel.org, broonie@...nel.org, peterhuewe@....de,
        jgg@...pe.ca, jarkko@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        linux-spi@...r.kernel.org, linux-tegra@...r.kernel.org,
        linux-integrity@...r.kernel.org, linux-kernel@...r.kernel.org,
        jonathanh@...dia.com, skomatineni@...dia.com, ldewangan@...dia.com
Subject: Re: [Patch V6 3/3] spi: tegra210-quad: Enable TPM wait polling

On Mon, Feb 27, 2023 at 10:51:08PM +0530, Krishna Yarlagadda wrote:
> Trusted Platform Module requires flow control. As defined in TPM
> interface specification, client would drive MISO line at same cycle as
> last address bit on MOSI.
> Tegra241 QSPI controller has TPM wait state detection feature which is
> enabled for TPM client devices reported in SPI device mode bits.
> Set half duplex flag for TPM device to detect and send entire message
> to controller in one shot.
> 
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@...dia.com>
> ---
>  drivers/spi/spi-tegra210-quad.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c
> index b967576b6c96..e1165584a20a 100644
> --- a/drivers/spi/spi-tegra210-quad.c
> +++ b/drivers/spi/spi-tegra210-quad.c
> @@ -142,6 +142,7 @@
>  
>  #define QSPI_GLOBAL_CONFIG			0X1a4
>  #define QSPI_CMB_SEQ_EN				BIT(0)
> +#define QSPI_TPM_WAIT_POLL_EN			BIT(1)
>  
>  #define QSPI_CMB_SEQ_ADDR			0x1a8
>  #define QSPI_ADDRESS_VALUE_SET(X)		(((x) & 0xFFFF) << 0)
> @@ -164,6 +165,7 @@
>  struct tegra_qspi_soc_data {
>  	bool has_dma;
>  	bool cmb_xfer_capable;
> +	bool support_tpm;

Nit: this could be "supports_tpm" for slightly more consistency with
"has_dma".

Thierry

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ