[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <865ybizqfi.wl-maz@kernel.org>
Date: Thu, 02 Mar 2023 23:25:37 +0000
From: Marc Zyngier <maz@...nel.org>
To: Aristeu Rozanski <aris@...hat.com>,
Darren Hart <darren@...amperecomputing.com>
Cc: linux-kernel@...r.kernel.org
Subject: Re: Error reports at boot time in Ampere Altra machines since c733ebb7c
On Thu, 02 Mar 2023 20:17:32 +0000,
Aristeu Rozanski <aris@...hat.com> wrote:
>
> Hi Marc,
>
> Since c733ebb7cb67d ("irqchip/gic-v3-its: Reset each ITS's BASERn
> register before probe"), Ampere Altra machines are reporting corrected
> errors during boot:
>
> [ 0.294334] HEST: Table parsing has been initialized.
> [ 0.294397] sdei: SDEIv1.0 (0x0) detected in firmware.
> [ 0.299622] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
> [ 0.299626] {1}[Hardware Error]: event severity: recoverable
> [ 0.299629] {1}[Hardware Error]: Error 0, type: recoverable
> [ 0.299633] {1}[Hardware Error]: section type: unknown, e8ed898d-df16-43cc-8ecc-54f060ef157f
> [ 0.299638] {1}[Hardware Error]: section length: 0x30
> [ 0.299645] {1}[Hardware Error]: 00000000: 00000005 ec30000e 00080110 80001001 ......0.........
> [ 0.299648] {1}[Hardware Error]: 00000010: 00000300 00000000 00000000 00000000 ................
> [ 0.299650] {1}[Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................
> [ 0.299714] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 3
> [ 0.299716] {2}[Hardware Error]: event severity: recoverable
> [ 0.299717] {2}[Hardware Error]: Error 0, type: recoverable
> [ 0.299718] {2}[Hardware Error]: section type: unknown, e8ed898d-df16-43cc-8ecc-54f060ef157f
> [ 0.299720] {2}[Hardware Error]: section length: 0x30
> [ 0.299722] {2}[Hardware Error]: 00000000: 40000005 ec30000e 00080110 80005001 ...@.........P..
> [ 0.299724] {2}[Hardware Error]: 00000010: 00000300 00000000 00000000 00000000 ................
> [ 0.299726] {2}[Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................
> [ 0.299912] GHES: APEI firmware first mode is enabled by APEI bit.
>
> Because the errors are being reported later in boot, it's hard to
> pinpoint exactly what's causing it without decoding the error information,
> which I currently don't know how to do it.
+ Darren
Hopefully someone at Ampere can decode this and tell us what is happening.
> There're no problems other than of course triggering tests because of
> the warnings.
It says "Hardware Error". In my book, that's pretty bad. Do you see
this on more than a single machine?
> Do you know what's going on here?
No idea. I haven't seen this on the Altra I have access to so far,
It could be related to firmware and/or things like power management,
but again, someone needs to help us with the error report above.
Thanks,
M.
--
Without deviation from the norm, progress is not possible.
Powered by blists - more mailing lists