linux-kernel - Re: [PATCH 2/8] arm64: dts: qcom: msm8998-fxtec: correct GPIO keys wakeup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 4 Mar 2023 13:56:55 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/8] arm64: dts: qcom: msm8998-fxtec: correct GPIO keys
 wakeup



On 4.03.2023 13:33, Krzysztof Kozlowski wrote:
> gpio-keys,wakeup is a deprecated property:
> 
>   msm8998-fxtec-pro1.dtb: gpio-hall-sensors: event-hall-sensor1: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>  arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> index 5aad9f05780a..8b71b1f8f300 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
> @@ -44,7 +44,7 @@ event-hall-sensor1 {
>  			label = "Keyboard Hall Sensor";
>  			gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
>  			debounce-interval = <15>;
> -			gpio-key,wakeup;
> +			wakeup-source;
>  			linux,input-type = <EV_SW>;
>  			linux,code = <SW_KEYPAD_SLIDE>;
>  		};
> @@ -116,7 +116,7 @@ button-vol-up {
>  			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
>  			linux,input-type = <EV_KEY>;
>  			linux,code = <KEY_VOLUMEUP>;
> -			gpio-key,wakeup;
> +			wakeup-source;
>  			debounce-interval = <15>;
>  		};
>