[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230304165653.2179835-1-linux@roeck-us.net>
Date: Sat, 4 Mar 2023 08:56:52 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: Alim Akhtar <alim.akhtar@...sung.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-kernel@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
Subject: [PATCH 1/2] watchdog: s3c2410_wdt: Use Use devm_clk_get[_optional]_enabled() helpers
The devm_clk_get[_optional]_enabled() helpers:
- call devm_clk_get[_optional]()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
While at it, use dev_err_probe consistently, and use its return value
to return the error code.
Cc: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
Signed-off-by: Guenter Roeck <linux@...ck-us.net>
---
drivers/watchdog/s3c2410_wdt.c | 45 +++++++---------------------------
1 file changed, 9 insertions(+), 36 deletions(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 200ba236a72e..a1fcb79b0b7c 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -661,35 +661,17 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
if (IS_ERR(wdt->reg_base))
return PTR_ERR(wdt->reg_base);
- wdt->bus_clk = devm_clk_get(dev, "watchdog");
- if (IS_ERR(wdt->bus_clk)) {
- dev_err(dev, "failed to find bus clock\n");
- return PTR_ERR(wdt->bus_clk);
- }
-
- ret = clk_prepare_enable(wdt->bus_clk);
- if (ret < 0) {
- dev_err(dev, "failed to enable bus clock\n");
- return ret;
- }
+ wdt->bus_clk = devm_clk_get_enabled(dev, "watchdog");
+ if (IS_ERR(wdt->bus_clk))
+ return dev_err_probe(dev, PTR_ERR(wdt->bus_clk), "failed to get bus clock\n");
/*
* "watchdog_src" clock is optional; if it's not present -- just skip it
* and use "watchdog" clock as both bus and source clock.
*/
- wdt->src_clk = devm_clk_get_optional(dev, "watchdog_src");
- if (IS_ERR(wdt->src_clk)) {
- dev_err_probe(dev, PTR_ERR(wdt->src_clk),
- "failed to get source clock\n");
- ret = PTR_ERR(wdt->src_clk);
- goto err_bus_clk;
- }
-
- ret = clk_prepare_enable(wdt->src_clk);
- if (ret) {
- dev_err(dev, "failed to enable source clock\n");
- goto err_bus_clk;
- }
+ wdt->src_clk = devm_clk_get_optional_enabled(dev, "watchdog_src");
+ if (IS_ERR(wdt->src_clk))
+ return dev_err_probe(dev, PTR_ERR(wdt->src_clk), "failed to get source clock\n");
wdt->wdt_device.min_timeout = 1;
wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
@@ -710,7 +692,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
S3C2410_WATCHDOG_DEFAULT_TIME);
} else {
dev_err(dev, "failed to use default timeout\n");
- goto err_src_clk;
+ return ret;
}
}
@@ -718,7 +700,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
pdev->name, pdev);
if (ret != 0) {
dev_err(dev, "failed to install irq (%d)\n", ret);
- goto err_src_clk;
+ return ret;
}
watchdog_set_nowayout(&wdt->wdt_device, nowayout);
@@ -744,7 +726,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
ret = watchdog_register_device(&wdt->wdt_device);
if (ret)
- goto err_src_clk;
+ return ret;
ret = s3c2410wdt_enable(wdt, true);
if (ret < 0)
@@ -766,12 +748,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
err_unregister:
watchdog_unregister_device(&wdt->wdt_device);
- err_src_clk:
- clk_disable_unprepare(wdt->src_clk);
-
- err_bus_clk:
- clk_disable_unprepare(wdt->bus_clk);
-
return ret;
}
@@ -786,9 +762,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
watchdog_unregister_device(&wdt->wdt_device);
- clk_disable_unprepare(wdt->src_clk);
- clk_disable_unprepare(wdt->bus_clk);
-
return 0;
}
--
2.39.1
Powered by blists - more mailing lists