[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <891023d7-9510-445e-9053-ad5c0398d350@roeck-us.net>
Date: Sun, 5 Mar 2023 06:31:08 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>
Cc: Christophe JAILLET <christophe.jaillet@...adoo.fr>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-watchdog@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] watchdog: s3c2410_wdt: Use Use
devm_clk_get[_optional]_enabled() helpers
On Sun, Mar 05, 2023 at 12:15:00PM +0100, Uwe Kleine-König wrote:
> Hello Guenter,
>
> On Sat, Mar 04, 2023 at 02:10:47PM -0800, Guenter Roeck wrote:
> > On 3/4/23 13:46, Christophe JAILLET wrote:
> > > Le 04/03/2023 à 17:56, Guenter Roeck a écrit :
> > > > The devm_clk_get[_optional]_enabled() helpers:
> > > > - call devm_clk_get[_optional]()
> > > > - call clk_prepare_enable() and register what is needed in order to
> > > > call clk_disable_unprepare() when needed, as a managed resource.
> > > >
> > > > This simplifies the code and avoids the calls to clk_disable_unprepare().
> > > >
> > > > While at it, use dev_err_probe consistently, and use its return value
> > > > to return the error code.
> > > >
> > > > Cc: Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
> > > > Signed-off-by: Guenter Roeck <linux@...ck-us.net>
> > > > ---
> > > > drivers/watchdog/s3c2410_wdt.c | 45 +++++++---------------------------
> > > > 1 file changed, 9 insertions(+), 36 deletions(-)
> > > >
> > > > diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> > > > index 200ba236a72e..a1fcb79b0b7c 100644
> > > > --- a/drivers/watchdog/s3c2410_wdt.c
> > > > +++ b/drivers/watchdog/s3c2410_wdt.c
> > > > @@ -661,35 +661,17 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> > > > if (IS_ERR(wdt->reg_base))
> > > > return PTR_ERR(wdt->reg_base);
> > > > - wdt->bus_clk = devm_clk_get(dev, "watchdog");
> > > > - if (IS_ERR(wdt->bus_clk)) {
> > > > - dev_err(dev, "failed to find bus clock\n");
> > > > - return PTR_ERR(wdt->bus_clk);
> > > > - }
> > > > -
> > > > - ret = clk_prepare_enable(wdt->bus_clk);
> > > > - if (ret < 0) {
> > > > - dev_err(dev, "failed to enable bus clock\n");
> > > > - return ret;
> > > > - }
> > > > + wdt->bus_clk = devm_clk_get_enabled(dev, "watchdog");
> > > > + if (IS_ERR(wdt->bus_clk))
> > > > + return dev_err_probe(dev, PTR_ERR(wdt->bus_clk), "failed to get bus clock\n");
> > > > /*
> > > > * "watchdog_src" clock is optional; if it's not present -- just skip it
> > > > * and use "watchdog" clock as both bus and source clock.
> > > > */
> > > > - wdt->src_clk = devm_clk_get_optional(dev, "watchdog_src");
> > > > - if (IS_ERR(wdt->src_clk)) {
> > > > - dev_err_probe(dev, PTR_ERR(wdt->src_clk),
> > > > - "failed to get source clock\n");
> > > > - ret = PTR_ERR(wdt->src_clk);
> > > > - goto err_bus_clk;
> > > > - }
> > > > -
> > > > - ret = clk_prepare_enable(wdt->src_clk);
> > > > - if (ret) {
> > > > - dev_err(dev, "failed to enable source clock\n");
> > > > - goto err_bus_clk;
> > > > - }
> > > > + wdt->src_clk = devm_clk_get_optional_enabled(dev, "watchdog_src");
> > > > + if (IS_ERR(wdt->src_clk))
> > > > + return dev_err_probe(dev, PTR_ERR(wdt->src_clk), "failed to get source clock\n");
> > > > wdt->wdt_device.min_timeout = 1;
> > > > wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
> > > > @@ -710,7 +692,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> > > > S3C2410_WATCHDOG_DEFAULT_TIME);
> > > > } else {
> > > > dev_err(dev, "failed to use default timeout\n");
> > > > - goto err_src_clk;
> > > > + return ret;
> > >
> > > Hi,
> > >
> > > Nit: this also could be "return dev_err_probe()"
> > >
> > > > }
> > > > }
> > > > @@ -718,7 +700,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
> > > > pdev->name, pdev);
> > > > if (ret != 0) {
> > > > dev_err(dev, "failed to install irq (%d)\n", ret);
> > > > - goto err_src_clk;
> > > > + return ret;
> > >
> > > Nit: this also could be "return dev_err_probe()"
> > >
> >
> > The primary reason to call dev_err_probe() is that the error may be
> > -EPROBE_DEFER, in which case the error message is suppressed.
> > That is not the case for those two functions; they never return
> > -EPROBE_DEFER. Calling dev_err_probe() would give the false impression
> > that the functions _might_ return -EPROBE_DEFER.
>
> That is subjective. In my book dev_err_probe() handling -EPROBE_DEFER is
> only one aspect. Another is that using it allows to have return and error
> message in a single line and also that if already other exit paths use
> it to get a consistent style for the emitted messages. Having said that
> *I* wouldn't assume that the previous call might return -EPROBE_DEFER
> just because dev_err_probe() is used.
>
> Having said that, I also don't think there is much harm if someone
> thinks that a given function (here devm_request_irq()) might return
> -EPROBE_DEFER.
>
I guess we'll have to agree to disagree.
Guenter
Powered by blists - more mailing lists