Message-ID: <CAD=FV=UvaE1zFxP7pAXAzh=6Qdu9dSjd73DfEgJfmBeHNcJ_oA@mail.gmail.com>
Date:   Mon, 6 Mar 2023 09:35:34 -0800
From:   Doug Anderson <dianders@...omium.org>
To:     Vinod Polimera <quic_vpolimer@...cinc.com>
Cc:     dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, robdclark@...il.com,
        swboyd@...omium.org, quic_kalyant@...cinc.com,
        dmitry.baryshkov@...aro.org, quic_khsieh@...cinc.com,
        quic_vproddut@...cinc.com, quic_bjorande@...cinc.com,
        quic_abhinavk@...cinc.com, quic_sbillaka@...cinc.com
Subject: Re: [PATCH v14 00/14] Add PSR support for eDP

Hi,

On Thu, Mar 2, 2023 at 8:33 AM Vinod Polimera <quic_vpolimer@...cinc.com> wrote:
>
> Changes in v2:
>   - Use dp bridge to set psr entry/exit instead of dpu_enocder.
>   - Don't modify whitespaces.
>   - Set self refresh aware from atomic_check.
>   - Set self refresh aware only if psr is supported.
>   - Provide a stub for msm_dp_display_set_psr.
>   - Move dp functions to bridge code.
>
> Changes in v3:
>   - Change callback names to reflect atomic interfaces.
>   - Move bridge callback change to separate patch as suggested by Dmitry.
>   - Remove psr function declaration from msm_drv.h.
>   - Set self_refresh_aware flag only if psr is supported.
>   - Modify the variable names to simpler form.
>   - Define bit fields for PSR settings.
>   - Add comments explaining the steps to enter/exit psr.
>   - Change DRM_INFO to drm_dbg_db.
>
> Changes in v4:
>   - Move the get crtc functions to drm_atomic.
>   - Add atomic functions for DP bridge too.
>   - Add ternary operator to choose eDP or DP ops.
>   - Return true/false instead of 1/0.
>   - mode_valid missing in the eDP bridge ops.
>   - Move the functions to get crtc into drm_atomic.c.
>   - Fix compilation issues.
>   - Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc.
>   - Check for crtc state enable while reserving resources.
>
> Changes in v5:
>   - Move the mode_valid changes into a different patch.
>   - Complete psr_op_comp only when isr is set.
>   - Move the DP atomic callback changes to a different patch.
>   - Get crtc from drm connector state crtc.
>   - Move to separate patch for check for crtc state enable while
> reserving resources.
>
> Changes in v6:
>   - Remove crtc from dpu_encoder_virt struct.
>   - fix crtc check during vblank toggle crtc.
>   - Misc changes.
>
> Changes in v7:
>   - Add fix for underrun issue on kasan build.
>
> Changes in v8:
>   - Drop the enc spinlock as it won't serve any purpose in
> protetcing conn state.(Dmitry/Doug)
>
> Changes in v9:
>   - Update commit message and fix alignment using spaces.(Marijn)
>   - Misc changes.(Marijn)
>
> Changes in v10:
>   - Get crtc cached in dpu_enc during obj init.(Dmitry)
>
> Changes in v11:
>   - Remove crtc cached in dpu_enc during obj init.
>   - Update dpu_enc crtc state on crtc enable/disable during self refresh.
>
> Changes in v12:
>   - Update sc7180 intf mask to get intf timing gen status
> based on DPU_INTF_STATUS_SUPPORTED bit.(Dmitry)
>   - Remove "clear active interface in the datapath cleanup" change
> as it is already included.
>
> Changes in v13:
>   - Move core changes to top of the series.(Dmitry)
>   - Drop self refresh aware disable change after psr entry.(Dmitry)
>
> Changes in v14:
>   - Set self_refresh_aware for the PSR to kick in.
>
> Vinod Polimera (14):
>   drm: add helper functions to retrieve old and new crtc
>   drm/bridge: use atomic enable/disable callbacks for panel bridge
>   drm/bridge: add psr support for panel bridge callbacks
>   drm/msm/disp/dpu: check for crtc enable rather than crtc active to
>     release shared resources
>   drm/msm/disp/dpu: get timing engine status from intf status register
>   drm/msm/disp/dpu: wait for extra vsync till timing engine status is
>     disabled
>   drm/msm/disp/dpu: reset the datapath after timing engine disable
>   drm/msm/dp: use atomic callbacks for DP bridge ops
>   drm/msm/dp: Add basic PSR support for eDP
>   drm/msm/dp: use the eDP bridge ops to validate eDP modes
>   drm/msm/disp/dpu: use atomic enable/disable callbacks for encoder
>     functions
>   drm/msm/disp/dpu: add PSR support for eDP interface in dpu driver
>   drm/msm/disp/dpu: update dpu_enc crtc state on crtc enable/disable
>     during self refresh
>   drm/msm/dp: set self refresh aware based on psr support
>
>  drivers/gpu/drm/bridge/panel.c                     |  68 +++++++-
>  drivers/gpu/drm/drm_atomic.c                       |  60 +++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c           |  40 ++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        |  26 +++-
>  .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c   |  22 +++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |   3 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |  12 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c        |   8 +-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   2 +-
>  drivers/gpu/drm/msm/dp/dp_catalog.c                |  80 ++++++++++
>  drivers/gpu/drm/msm/dp/dp_catalog.h                |   4 +
>  drivers/gpu/drm/msm/dp/dp_ctrl.c                   |  80 ++++++++++
>  drivers/gpu/drm/msm/dp/dp_ctrl.h                   |   3 +
>  drivers/gpu/drm/msm/dp/dp_display.c                |  36 +++--
>  drivers/gpu/drm/msm/dp/dp_display.h                |   2 +
>  drivers/gpu/drm/msm/dp/dp_drm.c                    | 173 ++++++++++++++++++++-
>  drivers/gpu/drm/msm/dp/dp_drm.h                    |   9 +-
>  drivers/gpu/drm/msm/dp/dp_link.c                   |  36 +++++
>  drivers/gpu/drm/msm/dp/dp_panel.c                  |  22 +++
>  drivers/gpu/drm/msm/dp/dp_panel.h                  |   6 +
>  drivers/gpu/drm/msm/dp/dp_reg.h                    |  27 ++++
>  include/drm/drm_atomic.h                           |   7 +
>  22 files changed, 683 insertions(+), 43 deletions(-)

I put these patches on top of msm-next. With that, I was at least able
to see the PSR transition function being called by:

echo "dp_catalog_ctrl_set_psr" > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_on
cat /sys/kernel/debug/tracing/trace_pipe

I didn't do anything to actually confirm that the panel was in PSR
mode nor that power savings are happening, but at least I can confirm
that the function is being called again (AKA the fix from v13 to v14
seems to have worked).

---

I also backported these to chromeos-5.15 and let a hoglin device sit
there on my desk for a few hours with the cursor blinking to see if I
could see any of the "flickers" that I saw before. I was running a
KASAN build and forcing cpus to the lowest frequencies:

echo userspace > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq > \
    /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed

echo userspace > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu4/cpufreq/cpuinfo_min_freq > \
    /sys/devices/system/cpu/cpu4/cpufreq/scaling_setspeed

echo userspace > /sys/devices/system/cpu/cpu7/cpufreq/scaling_governor
cat /sys/devices/system/cpu/cpu7/cpufreq/cpuinfo_min_freq > \
    /sys/devices/system/cpu/cpu7/cpufreq/scaling_setspeed

I did manage to see the screen flicker once over a period of an hour
or two. That's not terribly surprising because of the changes in v13
which dropped your previous fix for this. I'll look forward to seeing
a future patch to fix this in the core.

---

In any case, with all the caveats mentioned above, I'm OK with:

Tested-by: Douglas Anderson <dianders@...omium.org>

Powered by blists - more mailing lists