[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230307153617.643260-6-sebastian.reichel@collabora.com>
Date: Tue, 7 Mar 2023 16:36:11 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Heiko Stuebner <heiko@...ech.de>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Lee Jones <lee@...nel.org>
Cc: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Mark Brown <broonie@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>,
kernel@...labora.com
Subject: [PATCHv7 05/11] mfd: rk808: split into core and i2c
Split rk808 into a core and an i2c part in preperation for
SPI support.
Acked-for-MFD-by: Lee Jones <lee@...nel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
drivers/clk/Kconfig | 2 +-
drivers/input/misc/Kconfig | 2 +-
drivers/mfd/Kconfig | 7 +-
drivers/mfd/Makefile | 3 +-
drivers/mfd/{rk808.c => rk8xx-core.c} | 209 +++++---------------------
drivers/mfd/rk8xx-i2c.c | 200 ++++++++++++++++++++++++
drivers/pinctrl/Kconfig | 2 +-
drivers/power/supply/Kconfig | 2 +-
drivers/regulator/Kconfig | 2 +-
drivers/rtc/Kconfig | 2 +-
include/linux/mfd/rk808.h | 6 +
sound/soc/codecs/Kconfig | 2 +-
12 files changed, 256 insertions(+), 183 deletions(-)
rename drivers/mfd/{rk808.c => rk8xx-core.c} (76%)
create mode 100644 drivers/mfd/rk8xx-i2c.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index b6c5bf69a2b2..b08fa3273c84 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -82,7 +82,7 @@ config COMMON_CLK_MAX9485
config COMMON_CLK_RK808
tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
- depends on MFD_RK808
+ depends on MFD_RK8XX
help
This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5c2d0c06d2a5..6a6978fc68fa 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -598,7 +598,7 @@ config INPUT_PWM_VIBRA
config INPUT_RK805_PWRKEY
tristate "Rockchip RK805 PMIC power key support"
- depends on MFD_RK808
+ depends on MFD_RK8XX
help
Select this option to enable power key driver for RK805.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fcc141e067b9..2998d04f8756 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1176,12 +1176,17 @@ config MFD_RC5T583
Additional drivers must be enabled in order to use the
different functionality of the device.
-config MFD_RK808
+config MFD_RK8XX
+ bool
+ select MFD_CORE
+
+config MFD_RK8XX_I2C
tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power Management Chip"
depends on I2C && OF
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
+ select MFD_RK8XX
help
If you say yes here you get support for the RK805, RK808, RK809,
RK817 and RK818 Power Management chips.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2f6c89d1e277..be9e4806d2e6 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -213,7 +213,8 @@ obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_NTXEC) += ntxec.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
-obj-$(CONFIG_MFD_RK808) += rk808.o
+obj-$(CONFIG_MFD_RK8XX) += rk8xx-core.o
+obj-$(CONFIG_MFD_RK8XX_I2C) += rk8xx-i2c.o
obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk8xx-core.c
similarity index 76%
rename from drivers/mfd/rk808.c
rename to drivers/mfd/rk8xx-core.c
index ce52307cbaea..5c0a5acef34c 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk8xx-core.c
@@ -1,18 +1,15 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * MFD core driver for Rockchip RK808/RK818
+ * MFD core driver for Rockchip RK8XX
*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
*
* Author: Chris Zhong <zyw@...k-chips.com>
* Author: Zhang Qing <zhangqing@...k-chips.com>
- *
- * Copyright (C) 2016 PHYTEC Messtechnik GmbH
- *
* Author: Wadim Egorov <w.egorov@...tec.de>
*/
-#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/mfd/rk808.h>
#include <linux/mfd/core.h>
@@ -27,92 +24,6 @@ struct rk808_reg_data {
int value;
};
-static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
-{
- /*
- * Notes:
- * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
- * we don't use that feature. It's better to cache.
- * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
- * bits are cleared in case when we shutoff anyway, but better safe.
- */
-
- switch (reg) {
- case RK808_SECONDS_REG ... RK808_WEEKS_REG:
- case RK808_RTC_STATUS_REG:
- case RK808_VB_MON_REG:
- case RK808_THERMAL_REG:
- case RK808_DCDC_UV_STS_REG:
- case RK808_LDO_UV_STS_REG:
- case RK808_DCDC_PG_REG:
- case RK808_LDO_PG_REG:
- case RK808_DEVCTRL_REG:
- case RK808_INT_STS_REG1:
- case RK808_INT_STS_REG2:
- return true;
- }
-
- return false;
-}
-
-static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
-{
- /*
- * Notes:
- * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
- * we don't use that feature. It's better to cache.
- */
-
- switch (reg) {
- case RK817_SECONDS_REG ... RK817_WEEKS_REG:
- case RK817_RTC_STATUS_REG:
- case RK817_CODEC_DTOP_LPT_SRST:
- case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
- case RK817_PMIC_CHRG_STS:
- case RK817_PMIC_CHRG_OUT:
- case RK817_PMIC_CHRG_IN:
- case RK817_INT_STS_REG0:
- case RK817_INT_STS_REG1:
- case RK817_INT_STS_REG2:
- case RK817_SYS_STS:
- return true;
- }
-
- return false;
-}
-
-static const struct regmap_config rk818_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = RK818_USB_CTRL_REG,
- .cache_type = REGCACHE_RBTREE,
- .volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk805_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = RK805_OFF_SOURCE_REG,
- .cache_type = REGCACHE_RBTREE,
- .volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk808_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = RK808_IO_POL_REG,
- .cache_type = REGCACHE_RBTREE,
- .volatile_reg = rk808_is_volatile_reg,
-};
-
-static const struct regmap_config rk817_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .max_register = RK817_GPIO_INT_CFG,
- .cache_type = REGCACHE_NONE,
- .volatile_reg = rk817_is_volatile_reg,
-};
-
static const struct resource rtc_resources[] = {
DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM),
};
@@ -605,9 +516,9 @@ static int rk808_restart(struct sys_off_data *data)
return NOTIFY_DONE;
}
-static void rk8xx_shutdown(struct i2c_client *client)
+void rk8xx_shutdown(struct device *dev)
{
- struct rk808 *rk808 = i2c_get_clientdata(client);
+ struct rk808 *rk808 = dev_get_drvdata(dev);
int ret;
switch (rk808->variant) {
@@ -628,61 +539,31 @@ static void rk8xx_shutdown(struct i2c_client *client)
return;
}
if (ret)
- dev_warn(&client->dev,
+ dev_warn(dev,
"Cannot switch to power down function\n");
}
+EXPORT_SYMBOL_GPL(rk8xx_shutdown);
-static const struct of_device_id rk808_of_match[] = {
- { .compatible = "rockchip,rk805" },
- { .compatible = "rockchip,rk808" },
- { .compatible = "rockchip,rk809" },
- { .compatible = "rockchip,rk817" },
- { .compatible = "rockchip,rk818" },
- { },
-};
-MODULE_DEVICE_TABLE(of, rk808_of_match);
-
-static int rk808_probe(struct i2c_client *client)
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap)
{
- struct device_node *np = client->dev.of_node;
struct rk808 *rk808;
const struct rk808_reg_data *pre_init_reg;
const struct mfd_cell *cells;
int nr_pre_init_regs;
int nr_cells;
- int msb, lsb;
- unsigned char pmic_id_msb, pmic_id_lsb;
int ret;
int i;
- rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL);
+ rk808 = devm_kzalloc(dev, sizeof(*rk808), GFP_KERNEL);
if (!rk808)
return -ENOMEM;
-
- if (of_device_is_compatible(np, "rockchip,rk817") ||
- of_device_is_compatible(np, "rockchip,rk809")) {
- pmic_id_msb = RK817_ID_MSB;
- pmic_id_lsb = RK817_ID_LSB;
- } else {
- pmic_id_msb = RK808_ID_MSB;
- pmic_id_lsb = RK808_ID_LSB;
- }
-
- /* Read chip variant */
- msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
- if (msb < 0)
- return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
-
- lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
- if (lsb < 0)
- return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
-
- rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK;
- dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
+ rk808->dev = dev;
+ rk808->variant = variant;
+ rk808->regmap = regmap;
+ dev_set_drvdata(dev, rk808);
switch (rk808->variant) {
case RK805_ID:
- rk808->regmap_cfg = &rk805_regmap_config;
rk808->regmap_irq_chip = &rk805_irq_chip;
pre_init_reg = rk805_pre_init_reg;
nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
@@ -690,7 +571,6 @@ static int rk808_probe(struct i2c_client *client)
nr_cells = ARRAY_SIZE(rk805s);
break;
case RK808_ID:
- rk808->regmap_cfg = &rk808_regmap_config;
rk808->regmap_irq_chip = &rk808_irq_chip;
pre_init_reg = rk808_pre_init_reg;
nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg);
@@ -698,7 +578,6 @@ static int rk808_probe(struct i2c_client *client)
nr_cells = ARRAY_SIZE(rk808s);
break;
case RK818_ID:
- rk808->regmap_cfg = &rk818_regmap_config;
rk808->regmap_irq_chip = &rk818_irq_chip;
pre_init_reg = rk818_pre_init_reg;
nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg);
@@ -707,7 +586,6 @@ static int rk808_probe(struct i2c_client *client)
break;
case RK809_ID:
case RK817_ID:
- rk808->regmap_cfg = &rk817_regmap_config;
rk808->regmap_irq_chip = &rk817_irq_chip;
pre_init_reg = rk817_pre_init_reg;
nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg);
@@ -715,27 +593,20 @@ static int rk808_probe(struct i2c_client *client)
nr_cells = ARRAY_SIZE(rk817s);
break;
default:
- dev_err(&client->dev, "Unsupported RK8XX ID %lu\n",
- rk808->variant);
+ dev_err(dev, "Unsupported RK8XX ID %lu\n", rk808->variant);
return -EINVAL;
}
- rk808->dev = &client->dev;
- i2c_set_clientdata(client, rk808);
-
- rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg);
- if (IS_ERR(rk808->regmap))
- return dev_err_probe(&client->dev, PTR_ERR(rk808->regmap),
- "regmap initialization failed\n");
+ dev_info(dev, "chip id: 0x%x\n", (unsigned int)rk808->variant);
- if (!client->irq)
- return dev_err_probe(&client->dev, -EINVAL, "No interrupt support, no core IRQ\n");
+ if (!irq)
+ return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n");
- ret = devm_regmap_add_irq_chip(&client->dev, rk808->regmap, client->irq,
+ ret = devm_regmap_add_irq_chip(dev, rk808->regmap, irq,
IRQF_ONESHOT, -1,
rk808->regmap_irq_chip, &rk808->irq_data);
if (ret)
- return dev_err_probe(&client->dev, ret, "Failed to add irq_chip\n");
+ return dev_err_probe(dev, ret, "Failed to add irq_chip\n");
for (i = 0; i < nr_pre_init_regs; i++) {
ret = regmap_update_bits(rk808->regmap,
@@ -743,45 +614,46 @@ static int rk808_probe(struct i2c_client *client)
pre_init_reg[i].mask,
pre_init_reg[i].value);
if (ret)
- return dev_err_probe(&client->dev, ret, "0x%x write err\n",
+ return dev_err_probe(dev, ret, "0x%x write err\n",
pre_init_reg[i].addr);
}
- ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE,
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
cells, nr_cells, NULL, 0,
regmap_irq_get_domain(rk808->irq_data));
if (ret)
- return dev_err_probe(&client->dev, ret, "failed to add MFD devices\n");
+ return dev_err_probe(dev, ret, "failed to add MFD devices\n");
- if (of_property_read_bool(np, "rockchip,system-power-controller")) {
- ret = devm_register_sys_off_handler(&client->dev,
+ if (device_property_read_bool(dev, "rockchip,system-power-controller")) {
+ ret = devm_register_sys_off_handler(dev,
SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH,
&rk808_power_off, rk808);
if (ret)
- return dev_err_probe(&client->dev, ret,
+ return dev_err_probe(dev, ret,
"failed to register poweroff handler\n");
switch (rk808->variant) {
case RK809_ID:
case RK817_ID:
- ret = devm_register_sys_off_handler(&client->dev,
+ ret = devm_register_sys_off_handler(dev,
SYS_OFF_MODE_RESTART, SYS_OFF_PRIO_HIGH,
&rk808_restart, rk808);
if (ret)
- dev_warn(&client->dev, "failed to register rst handler, %d\n", ret);
+ dev_warn(dev, "failed to register rst handler, %d\n", ret);
break;
default:
- dev_dbg(&client->dev, "pmic controlled board reset not supported\n");
+ dev_dbg(dev, "pmic controlled board reset not supported\n");
break;
}
}
return 0;
}
+EXPORT_SYMBOL_GPL(rk8xx_probe);
-static int __maybe_unused rk8xx_suspend(struct device *dev)
+int rk8xx_suspend(struct device *dev)
{
- struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+ struct rk808 *rk808 = dev_get_drvdata(dev);
int ret = 0;
switch (rk808->variant) {
@@ -804,10 +676,11 @@ static int __maybe_unused rk8xx_suspend(struct device *dev)
return ret;
}
+EXPORT_SYMBOL_GPL(rk8xx_suspend);
-static int __maybe_unused rk8xx_resume(struct device *dev)
+int rk8xx_resume(struct device *dev)
{
- struct rk808 *rk808 = i2c_get_clientdata(to_i2c_client(dev));
+ struct rk808 *rk808 = dev_get_drvdata(dev);
int ret = 0;
switch (rk808->variant) {
@@ -824,22 +697,10 @@ static int __maybe_unused rk8xx_resume(struct device *dev)
return ret;
}
-static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume);
-
-static struct i2c_driver rk808_i2c_driver = {
- .driver = {
- .name = "rk808",
- .of_match_table = rk808_of_match,
- .pm = &rk8xx_pm_ops,
- },
- .probe_new = rk808_probe,
- .shutdown = rk8xx_shutdown,
-};
-
-module_i2c_driver(rk808_i2c_driver);
+EXPORT_SYMBOL_GPL(rk8xx_resume);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Chris Zhong <zyw@...k-chips.com>");
MODULE_AUTHOR("Zhang Qing <zhangqing@...k-chips.com>");
MODULE_AUTHOR("Wadim Egorov <w.egorov@...tec.de>");
-MODULE_DESCRIPTION("RK808/RK818 PMIC driver");
+MODULE_DESCRIPTION("RK8xx PMIC core");
diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c
new file mode 100644
index 000000000000..6d121b589fec
--- /dev/null
+++ b/drivers/mfd/rk8xx-i2c.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip RK808/RK818 Core (I2C) driver
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (C) 2016 PHYTEC Messtechnik GmbH
+ *
+ * Author: Chris Zhong <zyw@...k-chips.com>
+ * Author: Zhang Qing <zhangqing@...k-chips.com>
+ * Author: Wadim Egorov <w.egorov@...tec.de>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/rk808.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ /*
+ * Notes:
+ * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+ * we don't use that feature. It's better to cache.
+ * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since
+ * bits are cleared in case when we shutoff anyway, but better safe.
+ */
+
+ switch (reg) {
+ case RK808_SECONDS_REG ... RK808_WEEKS_REG:
+ case RK808_RTC_STATUS_REG:
+ case RK808_VB_MON_REG:
+ case RK808_THERMAL_REG:
+ case RK808_DCDC_UV_STS_REG:
+ case RK808_LDO_UV_STS_REG:
+ case RK808_DCDC_PG_REG:
+ case RK808_LDO_PG_REG:
+ case RK808_DEVCTRL_REG:
+ case RK808_INT_STS_REG1:
+ case RK808_INT_STS_REG2:
+ return true;
+ }
+
+ return false;
+}
+
+static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ /*
+ * Notes:
+ * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but
+ * we don't use that feature. It's better to cache.
+ */
+
+ switch (reg) {
+ case RK817_SECONDS_REG ... RK817_WEEKS_REG:
+ case RK817_RTC_STATUS_REG:
+ case RK817_CODEC_DTOP_LPT_SRST:
+ case RK817_GAS_GAUGE_ADC_CONFIG0 ... RK817_GAS_GAUGE_CUR_ADC_K0:
+ case RK817_PMIC_CHRG_STS:
+ case RK817_PMIC_CHRG_OUT:
+ case RK817_PMIC_CHRG_IN:
+ case RK817_INT_STS_REG0:
+ case RK817_INT_STS_REG1:
+ case RK817_INT_STS_REG2:
+ case RK817_SYS_STS:
+ return true;
+ }
+
+ return false;
+}
+
+
+static const struct regmap_config rk818_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK818_USB_CTRL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk805_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK805_OFF_SOURCE_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk808_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK808_IO_POL_REG,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = rk808_is_volatile_reg,
+};
+
+static const struct regmap_config rk817_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RK817_GPIO_INT_CFG,
+ .cache_type = REGCACHE_NONE,
+ .volatile_reg = rk817_is_volatile_reg,
+};
+
+static int rk8xx_i2c_get_variant(struct i2c_client *client)
+{
+ u8 pmic_id_msb, pmic_id_lsb;
+ int msb, lsb;
+
+ if (of_device_is_compatible(client->dev.of_node, "rockchip,rk817") ||
+ of_device_is_compatible(client->dev.of_node, "rockchip,rk809")) {
+ pmic_id_msb = RK817_ID_MSB;
+ pmic_id_lsb = RK817_ID_LSB;
+ } else {
+ pmic_id_msb = RK808_ID_MSB;
+ pmic_id_lsb = RK808_ID_LSB;
+ }
+
+ /* Read chip variant */
+ msb = i2c_smbus_read_byte_data(client, pmic_id_msb);
+ if (msb < 0)
+ return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n");
+
+ lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb);
+ if (lsb < 0)
+ return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n");
+
+ return ((msb << 8) | lsb) & RK8XX_ID_MSK;
+}
+
+static int rk8xx_i2c_probe(struct i2c_client *client)
+{
+ const struct regmap_config *regmap_cfg;
+ struct regmap *regmap;
+ int variant;
+
+ variant = rk8xx_i2c_get_variant(client);
+ if (variant < 0)
+ return variant;
+
+ switch (variant) {
+ case RK805_ID:
+ regmap_cfg = &rk805_regmap_config;
+ break;
+ case RK808_ID:
+ regmap_cfg = &rk808_regmap_config;
+ break;
+ case RK818_ID:
+ regmap_cfg = &rk818_regmap_config;
+ break;
+ case RK809_ID:
+ case RK817_ID:
+ regmap_cfg = &rk817_regmap_config;
+ break;
+ default:
+ return dev_err_probe(&client->dev, -EINVAL, "Unsupported RK8XX ID %x\n", variant);
+ }
+
+ regmap = devm_regmap_init_i2c(client, regmap_cfg);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(regmap),
+ "regmap initialization failed\n");
+
+ return rk8xx_probe(&client->dev, variant, client->irq, regmap);
+}
+
+static void rk8xx_i2c_shutdown(struct i2c_client *client)
+{
+ rk8xx_shutdown(&client->dev);
+}
+
+static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume);
+
+static const struct of_device_id rk8xx_i2c_of_match[] = {
+ { .compatible = "rockchip,rk805" },
+ { .compatible = "rockchip,rk808" },
+ { .compatible = "rockchip,rk809" },
+ { .compatible = "rockchip,rk817" },
+ { .compatible = "rockchip,rk818" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match);
+
+static struct i2c_driver rk8xx_i2c_driver = {
+ .driver = {
+ .name = "rk8xx-i2c",
+ .of_match_table = rk8xx_i2c_of_match,
+ .pm = &rk8xx_i2c_pm_ops,
+ },
+ .probe_new = rk8xx_i2c_probe,
+ .shutdown = rk8xx_i2c_shutdown,
+};
+module_i2c_driver(rk8xx_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chris Zhong <zyw@...k-chips.com>");
+MODULE_AUTHOR("Zhang Qing <zhangqing@...k-chips.com>");
+MODULE_AUTHOR("Wadim Egorov <w.egorov@...tec.de>");
+MODULE_DESCRIPTION("RK8xx I2C PMIC driver");
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index dcb53c4a9584..38e6c5401554 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -407,7 +407,7 @@ config PINCTRL_PISTACHIO
config PINCTRL_RK805
tristate "Pinctrl and GPIO driver for RK805 PMIC"
- depends on MFD_RK808
+ depends on MFD_RK8XX
select GPIOLIB
select PINMUX
select GENERIC_PINCONF
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index c78be9f322e6..4a5e8e1d1237 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -706,7 +706,7 @@ config CHARGER_BQ256XX
config CHARGER_RK817
tristate "Rockchip RK817 PMIC Battery Charger"
- depends on MFD_RK808
+ depends on MFD_RK8XX
help
Say Y to include support for Rockchip RK817 Battery Charger.
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index aae28d0a489c..7f479753de5c 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1056,7 +1056,7 @@ config REGULATOR_RC5T583
config REGULATOR_RK808
tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
- depends on MFD_RK808
+ depends on MFD_RK8XX
help
Select this option to enable the power regulator of ROCKCHIP
PMIC RK805,RK809&RK817,RK808 and RK818.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 5a71579af0a1..86c5cee2cb33 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -395,7 +395,7 @@ config RTC_DRV_NCT3018Y
config RTC_DRV_RK808
tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
- depends on MFD_RK808
+ depends on MFD_RK8XX
help
If you say yes here you will get support for the
RTC of RK805, RK809 and RK817, RK808 and RK818 PMIC.
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index a89ddd9ba68e..4183427a80fe 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -794,4 +794,10 @@ struct rk808 {
const struct regmap_config *regmap_cfg;
const struct regmap_irq_chip *regmap_irq_chip;
};
+
+void rk8xx_shutdown(struct device *dev);
+int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap);
+int rk8xx_suspend(struct device *dev);
+int rk8xx_resume(struct device *dev);
+
#endif /* __LINUX_REGULATOR_RK808_H */
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 07747565c3b5..8b7cc25a6618 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1257,7 +1257,7 @@ config SND_SOC_RK3328
config SND_SOC_RK817
tristate "Rockchip RK817 audio CODEC"
- depends on MFD_RK808 || COMPILE_TEST
+ depends on MFD_RK8XX || COMPILE_TEST
config SND_SOC_RL6231
tristate
--
2.39.2
Powered by blists - more mailing lists