| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <269ed38b5eed9c3a259c183d59d4f1eb5128f132.camel@infradead.org>
Date: Tue, 07 Mar 2023 19:18:38 +0000
From: David Woodhouse <dwmw2@...radead.org>
To: Tom Lendacky <thomas.lendacky@....com>,
Usama Arif <usama.arif@...edance.com>, tglx@...utronix.de,
kim.phillips@....com, brgerst@...il.com,
"Rapan, Sabin" <sabrapan@...zon.com>
Cc: piotrgorski@...hyos.org, oleksandr@...alenko.name,
arjan@...ux.intel.com, mingo@...hat.com, bp@...en8.de,
dave.hansen@...ux.intel.com, hpa@...or.com, x86@...nel.org,
pbonzini@...hat.com, paulmck@...nel.org,
linux-kernel@...r.kernel.org, kvm@...r.kernel.org,
rcu@...r.kernel.org, mimoja@...oja.de, hewenliang4@...wei.com,
seanjc@...gle.com, pmenzel@...gen.mpg.de, fam.zheng@...edance.com,
punit.agrawal@...edance.com, simon.evans@...edance.com,
liangma@...ngbit.com
Subject: Re: [PATCH v13 00/11] Parallel CPU bringup for x86_64
On Tue, 2023-03-07 at 10:45 -0600, Tom Lendacky wrote:
> On 3/7/23 08:42, David Woodhouse wrote:
> > On Thu, 2023-03-02 at 11:12 +0000, Usama Arif wrote:
> > > The main code change over v12 is to fix the build error when
> > > CONFIG_FORCE_NR_CPUS is present.
> > >
> > > The commit message for removing initial stack has also been improved, typos
> > > have been fixed and extra comments have been added to make code clearer.
> >
> > Might something like this make it work in parallel with SEV-SNP? If so,
> > I can clean it up and adjust the C code to actually invoke it...
>
> This should be ok for both SEV-ES and SEV-SNP.
Thanks. So... something like this then?
Is static_branch_unlikely(&sev_es_enable_key) the right thing to use,
and does that cover SNP too?
Pushed to
https://git.infradead.org/users/dwmw2/linux.git/shortlog/refs/heads/parallel-6.2-rc8-v12bis
From d03aed91e5cfe840f4b18820fe6aed1765687321 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw@...zon.co.uk>
Date: Tue, 7 Mar 2023 19:06:50 +0000
Subject: [PATCH] x86/smpboot: Allow parallel bringup for SEV-ES
Enable parallel bringup for SEV-ES guests. The APs can't actually
execute the CPUID instruction directly during early startup, but they
can make the GHCB call directly instead, just as the VC trap handler
would do.
Factor out a prepare_parallel_bringup() function to help reduce the level
of complexity by allowing a simple 'return false' in the bail-out cases/
Thanks to Sabin for talking me through the way this works.
Suggested-by: Sabin Rapan <sabrapan@...zon.com>
Signed-off-by: David Woodhouse <dwmw@...zon.co.uk>
---
arch/x86/include/asm/sev-common.h | 3 +
arch/x86/include/asm/smp.h | 3 +-
arch/x86/kernel/head_64.S | 27 ++++++-
arch/x86/kernel/smpboot.c | 112 ++++++++++++++++++------------
4 files changed, 98 insertions(+), 47 deletions(-)
diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index b8357d6ecd47..f25df4bd318e 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -70,6 +70,7 @@
/* GHCBData[63:12] */ \
(((u64)(v) & GENMASK_ULL(63, 12)) >> 12)
+#ifndef __ASSEMBLY__
/*
* SNP Page State Change Operation
*
@@ -160,6 +161,8 @@ struct snp_psc_desc {
#define GHCB_RESP_CODE(v) ((v) & GHCB_MSR_INFO_MASK)
+#endif /* __ASSEMBLY__ */
+
/*
* Error codes related to GHCB input that can be communicated back to the guest
* by setting the lower 32-bits of the GHCB SW_EXITINFO1 field to 2.
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index defe76ee9e64..b3f67a764bfa 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -204,7 +204,8 @@ extern unsigned int smpboot_control;
/* Control bits for startup_64 */
#define STARTUP_APICID_CPUID_0B 0x80000000
#define STARTUP_APICID_CPUID_01 0x40000000
+#define STARTUP_APICID_SEV_ES 0x20000000
-#define STARTUP_PARALLEL_MASK (STARTUP_APICID_CPUID_01 | STARTUP_APICID_CPUID_0B)
+#define STARTUP_PARALLEL_MASK (STARTUP_APICID_CPUID_01 | STARTUP_APICID_CPUID_0B | STARTUP_APICID_SEV_ES)
#endif /* _ASM_X86_SMP_H */
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index c35f7c173832..3f5904eab678 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -26,7 +26,7 @@
#include <asm/nospec-branch.h>
#include <asm/fixmap.h>
#include <asm/smp.h>
-
+#include <asm/sev-common.h>
/*
* We are not able to switch in one step to the final KERNEL ADDRESS SPACE
* because we need identity-mapped pages.
@@ -242,6 +242,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
*
* Bit 31 STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
* Bit 30 STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
+ * Bit 29 STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
* Bit 0-24 CPU# if STARTUP_APICID_CPUID_xx flags are not set
*/
movl smpboot_control(%rip), %ecx
@@ -249,6 +250,8 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
jnz .Luse_cpuid_0b
testl $STARTUP_APICID_CPUID_01, %ecx
jnz .Luse_cpuid_01
+ testl $STARTUP_APICID_SEV_ES, %ecx
+ jnz .Luse_sev_cpuid_0b
andl $0x0FFFFFFF, %ecx
jmp .Lsetup_cpu
@@ -259,6 +262,28 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
shr $24, %edx
jmp .Lsetup_AP
+.Luse_sev_cpuid_0b:
+ /* Set the GHCB MSR to request CPUID 0xB_EDX */
+ movl $MSR_AMD64_SEV_ES_GHCB, %ecx
+ movl $(GHCB_CPUID_REQ_EDX << 30) | GHCB_MSR_CPUID_REQ, %eax
+ movl $0x0B, %edx
+ wrmsr
+
+ /* Perform GHCB MSR protocol */
+ vmgexit
+
+ /*
+ * Get the result. After the RDMSR:
+ * EAX should be 0xc0000005
+ * EDX should have the CPUID register value and since EDX
+ * is the target register, no need to move the result.
+ */
+ rdmsr
+ andl $GHCB_MSR_INFO_MASK, %eax
+ cmpl $GHCB_MSR_CPUID_RESP, %eax
+ jne 1f
+ jmp .Lsetup_AP
+
.Luse_cpuid_0b:
mov $0x0B, %eax
xorl %ecx, %ecx
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9d956571ecc1..d194c4ffeef8 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1510,6 +1510,71 @@ void __init smp_prepare_cpus_common(void)
set_cpu_sibling_map(0);
}
+
+/*
+ * We can do 64-bit AP bringup in parallel if the CPU reports its APIC
+ * ID in CPUID (either leaf 0x0B if we need the full APIC ID in X2APIC
+ * mode, or leaf 0x01 if 8 bits are sufficient). Otherwise it's too
+ * hard. And not for SEV-ES guests because they can't use CPUID that
+ * early.
+ */
+static bool __init prepare_parallel_bringup(void)
+{
+ if (IS_ENABLED(CONFIG_X86_32) || boot_cpu_data.cpuid_level < 1)
+ return false;
+
+ if (x2apic_mode) {
+ unsigned int eax, ebx, ecx, edx;
+
+ if (boot_cpu_data.cpuid_level < 0xb)
+ return false;
+
+ /*
+ * To support parallel bringup in x2apic mode, the AP will need
+ * to obtain its APIC ID from CPUID 0x0B, since CPUID 0x01 has
+ * only 8 bits. Check that it is present and seems correct.
+ */
+ cpuid_count(0xb, 0, &eax, &ebx, &ecx, &edx);
+
+ /*
+ * AMD says that if executed with an umimplemented level in
+ * ECX, then it will return all zeroes in EAX. Intel says it
+ * will return zeroes in both EAX and EBX. Checking only EAX
+ * should be sufficient.
+ */
+ if (!eax) {
+ pr_info("Disabling parallel bringup because CPUID 0xb looks untrustworthy\n");
+ return false;
+ }
+
+ if (IS_ENABLED(AMD_MEM_ENCRYPT) && static_branch_unlikely(&sev_es_enable_key)) {
+ pr_debug("Using SEV-ES CPUID 0xb for parallel CPU startup\n");
+ smpboot_control = STARTUP_APICID_SEV_ES;
+ } else if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) {
+ /*
+ * Other forms of memory encryption need to implement a way of
+ * finding the APs' APIC IDs that early.
+ */
+ return false;
+ } else {
+ pr_debug("Using CPUID 0xb for parallel CPU startup\n");
+ smpboot_control = STARTUP_APICID_CPUID_0B;
+ }
+ } else {
+ if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
+ return false;
+
+ /* Without X2APIC, what's in CPUID 0x01 should suffice. */
+ pr_debug("Using CPUID 0x1 for parallel CPU startup\n");
+ smpboot_control = STARTUP_APICID_CPUID_01;
+ }
+
+ cpuhp_setup_state_nocalls(CPUHP_BP_PARALLEL_DYN, "x86/cpu:kick",
+ native_cpu_kick, NULL);
+
+ return true;
+}
+
/*
* Prepare for SMP bootup.
* @max_cpus: configured maximum number of CPUs, It is a legacy parameter
@@ -1550,51 +1615,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
speculative_store_bypass_ht_init();
- /*
- * We can do 64-bit AP bringup in parallel if the CPU reports
- * its APIC ID in CPUID (either leaf 0x0B if we need the full
- * APIC ID in X2APIC mode, or leaf 0x01 if 8 bits are
- * sufficient). Otherwise it's too hard. And not for SEV-ES
- * guests because they can't use CPUID that early.
- */
- if (IS_ENABLED(CONFIG_X86_32) || boot_cpu_data.cpuid_level < 1 ||
- (x2apic_mode && boot_cpu_data.cpuid_level < 0xb) ||
- cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT))
- do_parallel_bringup = false;
-
- if (do_parallel_bringup && x2apic_mode) {
- unsigned int eax, ebx, ecx, edx;
-
- /*
- * To support parallel bringup in x2apic mode, the AP will need
- * to obtain its APIC ID from CPUID 0x0B, since CPUID 0x01 has
- * only 8 bits. Check that it is present and seems correct.
- */
- cpuid_count(0xb, 0, &eax, &ebx, &ecx, &edx);
-
- /*
- * AMD says that if executed with an umimplemented level in
- * ECX, then it will return all zeroes in EAX. Intel says it
- * will return zeroes in both EAX and EBX. Checking only EAX
- * should be sufficient.
- */
- if (eax) {
- pr_debug("Using CPUID 0xb for parallel CPU startup\n");
- smpboot_control = STARTUP_APICID_CPUID_0B;
- } else {
- pr_info("Disabling parallel bringup because CPUID 0xb looks untrustworthy\n");
- do_parallel_bringup = false;
- }
- } else if (do_parallel_bringup) {
- /* Without X2APIC, what's in CPUID 0x01 should suffice. */
- pr_debug("Using CPUID 0x1 for parallel CPU startup\n");
- smpboot_control = STARTUP_APICID_CPUID_01;
- }
-
- if (do_parallel_bringup) {
- cpuhp_setup_state_nocalls(CPUHP_BP_PARALLEL_DYN, "x86/cpu:kick",
- native_cpu_kick, NULL);
- }
+ if (do_parallel_bringup)
+ do_parallel_bringup = prepare_parallel_bringup();
snp_set_wakeup_secondary_cpu();
}
--
2.39.0
Download attachment "smime.p7s" of type "application/pkcs7-signature" (5965 bytes)
Powered by blists - more mailing lists