Message-ID: <20230307233123.14a411ee@polar.lan>
Date:   Tue, 7 Mar 2023 23:31:23 +0100
From:   Thomas Mann <rauchwolke@....net>
To:     Alexander Wetzel <alexander@...zel-home.de>
Cc:     Linux regressions mailing list <regressions@...ts.linux.dev>,
        "linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        Stanislaw Gruszka <stf_xl@...pl>,
        Helmut Schaa <helmut.schaa@...glemail.com>,
        Johannes Berg <johannes.berg@...el.com>
Subject: Re: [Regression] rt2800usb - Wifi performance issues and connection
 drops

Hi Alexander,

i can't boot the binary kernel here, as the initramfs is included in my
kernel, if you send me a patch, i can apply it and test it.

Thomas

On Tue, 7 Mar 2023 21:54:31 +0100
Alexander Wetzel <alexander@...zel-home.de> wrote:

> >>
> >
> > I just uploaded a test patch to bugzilla.
> > Please have a look if that fixes the issue.
> >
> > If not I would be interested in the output of your iTXQ status.
> > Enable CONFIG_MAC80211_DEBUGFS and run this command when the
> > connection is bad and send/share/upload to bugzilla the resulting
> > debug.out:
> >
> > k=1; while [ $k -lt 10 ]; do \
> > cat /sys/kernel/debug/ieee80211/phy?/netdev:*/stations/*/aqm; \
> > k=$(($k+1)); done >> debug.out
>
> Thomas and I continued with some debugging in
> https://bugzilla.kernel.org/show_bug.cgi?id=217119
>
> But the results so far are unexpected and we decided to continue the
> debugging with the round here. Hoping someone sees something I miss.
>
> A very summary where we are:
> I can't reproduce the bug with a very similar card and kernel config
> so far. Thomas card stops the iTXQs for intervalls >30s. Mine
> operates normally.
>
> A more useful but longer summary:
>
> Thomas updated to a 6.2 kernel and reported "connection drops and
> bandwidth problems" with his rt2800usb wlan card. (6.1 is ok.) Asked
> for some more details he reported:
> "...slow bandwidth stuff works better, but the main problem/test case
> is to start a 8-16 mbit video stream, which sometimes runs for a few
> seconds and then stops or it doesn't start at all"
>
> He bisected the issue and identified my commit 4444bc2116ae ("wifi:
> mac80211: Proper mark iTXQs for resumption") as culprit.
>
> Checking the internal iTXQ status when the issue is ongoing shows,
> that TID zero is flagged as dirty and thus is not transmitting queued
> packets. Interesting line from
> /sys/kernel/debug/ieee80211/phy?/netdev:*/stations/*/aqm:
> tid ac backlog-bytes backlog-packets new-flows drops marks overlimit
> collisions tx-bytes tx-packets flags
> 0 2 619736 404 1681 0 0 0 1 4513965 3019 0xe(RUN AMPDU NO-AMSDU DIRTY)
>
> --> The "normal" iTXQ handling IEEE80211_AC_BE has queued packets and
> is flagged as DIRTY. There even is a potential race setting the DIRTY
> flag, but the fix for that is not helping.
>
> Thus Thomas applied two debug patches, to better understand why the
> DIRTY flag is not cleared.
>
> And looking at the output from those we see that the driver stops Tx
> by calling ieee80211_stop_queue(). When ieee80211_wake_queue()
> mac80211 correctly resumes TX but is getting stopped by the driver
> after a single packet again. (The start of the relevant log is
> missing, so that may be initially more).
> I assume TX is still ok at that stage. But after some singe Tx
> operations the driver stops the queues again. Here the relevant part
> of the log:
> [  179.584997] XXXX __ieee80211_wake_txqs: waking TID 0
> [  179.585022] XXXX drv_tx: TX
> [  179.585027] XXXX ieee80211_stop_queue: called
> [  179.585028] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.585030] XXXX __ieee80211_wake_txqs: TID 3 NOT dirty
> [  179.585031] XXXX __ieee80211_wake_txqs: TID 8 NOT dirty
> [  179.585033] XXXX __ieee80211_wake_txqs: TID 11 NOT dirty
> [  179.585034] XXXX __ieee80211_wake_txqs: EXIT
> [  179.585035] XXXX __ieee80211_wake_txqs: ENTRY
> [  179.585036] XXXX __ieee80211_wake_txqs: TID 1 NOT dirty
> [  179.585037] XXXX __ieee80211_wake_txqs: TID 2 NOT dirty
> [  179.585038] XXXX __ieee80211_wake_txqs: TID 9 NOT dirty
> [  179.585040] XXXX __ieee80211_wake_txqs: TID 10 NOT dirty
> [  179.585041] XXXX __ieee80211_wake_txqs: EXIT
> [  179.585047] XXXX drv_tx: TX
> [  179.585056] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.585271] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.585868] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.586120] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.586544] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.586792] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.587317] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.587591] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> [  179.588569] XXXX ieee80211_tx_dequeue: mark TID 0 dirty. Reason: 1
> ....
> [  214.307617] XXXX ieee80211_wake_queue: called
>
>
> --> So the driver blocked TX for more than 30s. Which is a good
> explanation of what Thomas observes.
>
> But there is nothing mac80211 can do differently here. Whatever is
> the real reason for the issue, it's nothing obvious I see.
>
> Luckily I found a card using the same driver and nearly the same card:
> Thomas systems:Linux version 6.2.2-gentoo (root@foo) (gcc (Gentoo
> Hardened 12.2.1_p20230121-r1 p10) 12.2.1 20230121, GNU ld (Gentoo
> 2.39 p5) 2.39.0) #2 SMP Fri Mar  3 16:59:02 CET 2023ieee80211 phy0:
> rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
> ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
> ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>
> My system, using the kernel config from Thomas with only minor
> modifications (different filesystems and initramfs settings and
> enabled mac80211 debug and developer options):
> Linux version 6.2.2-gentoo (root@...ry.mordor) (gcc (Gentoo
> 12.2.1_p20230121-r1 p10) 12.2.1 20230121, GNU ld (Gentoo 2.40 p2)
> 2.40.0) #2 SMP Tue Mar  7 18:18:47 CET 2023ieee80211 phy0:
> rt2x00_set_rt: Info - RT chipset 3070, rev 0200 detected
> ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
> ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware
> file 'rt2870.bin'
> ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected
> - version: 0.36
>
> But there is one big difference on my system: I can't reproduce the
> bug so far. It's working as it should... (I did not apply the debug
> patches myself so far)
>
> I'm now planning to look a bit more into the rt2800usb driver and
> provide another debug patch for interesting looking code pieces in it.
>
> @Thomas:
> I've also uploaded you my binary kernel I'm running at the moment
> here: https://www.awhome.eu/s/5FjqMS73rtCtSBM
>
> That kernel should also be able to boot and operate your system. Can
> you try that and tell me, if that makes any difference?
>
> I'm also planning to provide some more debug patches, to figuring out
> which part of commit 4444bc2116ae ("wifi: mac80211: Proper mark iTXQs
> for resumption") fixes the issue for you. Assuming my understanding
> above is correct the patch should not really fix/break anything for
> you...With the findings above I would have expected your git bisec to
> identify commit a790cc3a4fad ("wifi: mac80211: add wake_tx_queue
> callback to drivers") as the first broken commit...
>
> Alexander

Powered by blists - more mailing lists