| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1678164097-13247-10-git-send-email-quic_mmanikan@quicinc.com>
Date: Tue, 7 Mar 2023 10:11:35 +0530
From: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <jassisinghbrar@...il.com>,
<mathieu.poirier@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <quic_mmanikan@...cinc.com>,
<quic_gurus@...cinc.com>, <loic.poulain@...aro.org>,
<quic_eberman@...cinc.com>, <robimarko@...il.com>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-remoteproc@...r.kernel.org>,
<linux-clk@...r.kernel.org>
CC: <quic_srichara@...cinc.com>, <quic_gokulsri@...cinc.com>,
<quic_sjaganat@...cinc.com>, <quic_kathirav@...cinc.com>,
<quic_arajkuma@...cinc.com>, <quic_anusha@...cinc.com>,
<quic_poovendh@...cinc.com>
Subject: [PATCH 09/11] arm64: dtsi: qcom: ipq5018: enable nodes required for multipd
Enable nodes required for multipd remoteproc bring up
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@...cinc.com>
---
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 130 ++++++++++++++++++++++++++
1 file changed, 130 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 084fb7b30dfd..4fa0990ab543 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -95,6 +95,24 @@ tz: tz@...00000 {
reg = <0x0 0x4ac00000 0x0 0x00400000>;
no-map;
};
+
+ q6_region: wcnss@...00000 {
+ no-map;
+ reg = <0x0 0x4b000000 0x0 0x01700000>;
+ };
+
+ smem@...00000 {
+ compatible = "qcom,smem";
+ reg = <0x0 0x4ab00000 0x0 0x00100000>;
+ hwlocks = <&tcsr_mutex 0>;
+ no-map;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-ipq5018", "qcom,scm";
+ };
};
timer {
@@ -105,6 +123,30 @@ timer {
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ wcss: wcss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 9>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -217,5 +259,93 @@ frame@...8000 {
status = "disabled";
};
};
+
+ tcsr_mutex: hwlock@...5000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01905000 0x8000>;
+ #hwlock-cells = <1>;
+ };
+
+ apcs_glb: mailbox@...1000 {
+ compatible = "qcom,ipq5018-apcs-apps-global";
+ reg = <0x0b111000 0x1000>;
+ #clock-cells = <1>;
+ #mbox-cells = <1>;
+ };
+
+ q6v5_wcss: remoteproc@...0000 {
+ compatible = "qcom,ipq5018-q6-mpd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x0cd00000 0x4040>;
+ interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 0>,
+ <&wcss_smp2p_in 1 0>,
+ <&wcss_smp2p_in 2 0>,
+ <&wcss_smp2p_in 3 0>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+
+ q6_wcss_pd1: remoteproc_pd1 {
+ compatible = "qcom,ipq5018-wcss-ahb-mpd";
+ };
+
+ q6_wcss_pd2: remoteproc_pd2 {
+ compatible = "qcom,ipq5018-wcss-pcie-mpd";
+ interrupts-extended = <&wcss_smp2p_in 16 0>,
+ <&wcss_smp2p_in 17 0>,
+ <&wcss_smp2p_in 20 0>,
+ <&wcss_smp2p_in 19 0>;
+ interrupt-names = "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 16>,
+ <&wcss_smp2p_out 17>,
+ <&wcss_smp2p_out 18>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ status = "disabled";
+ };
+
+ q6_wcss_pd3: remoteproc_pd3 {
+ compatible = "qcom,ipq5018-wcss-pcie-mpd";
+ interrupts-extended = <&wcss_smp2p_in 24 0>,
+ <&wcss_smp2p_in 25 0>,
+ <&wcss_smp2p_in 28 0>,
+ <&wcss_smp2p_in 27 0>;
+ interrupt-names = "fatal",
+ "ready",
+ "spawn-ack",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 24>,
+ <&wcss_smp2p_out 25>,
+ <&wcss_smp2p_out 26>;
+ qcom,smem-state-names = "shutdown",
+ "stop",
+ "spawn";
+ status = "disabled";
+ };
+ };
};
};
--
2.34.1
Powered by blists - more mailing lists