| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20230307113621.64153-5-gautam.dawar@amd.com>
Date: Tue, 7 Mar 2023 17:06:06 +0530
From: Gautam Dawar <gautam.dawar@....com>
To: <linux-net-drivers@....com>, <jasowang@...hat.com>,
Edward Cree <ecree.xilinx@...il.com>,
Martin Habets <habetsm.xilinx@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
"Jakub Kicinski" <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Richard Cochran <richardcochran@...il.com>,
<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
CC: <eperezma@...hat.com>, <harpreet.anand@....com>,
<tanuj.kamde@....com>, <koushik.dutta@....com>,
Gautam Dawar <gautam.dawar@....com>
Subject: [PATCH net-next v2 04/14] sfc: evaluate vdpa support based on FW capability CLIENT_CMD_VF_PROXY
Add and update vdpa_supported field to struct efx_nic to true if
running Firmware supports CLIENT_CMD_VF_PROXY capability. This is
required to ensure DMA isolation between MCDI command buffer and guest
buffers.
Signed-off-by: Gautam Dawar <gautam.dawar@....com>
---
drivers/net/ethernet/sfc/ef100_netdev.c | 26 +++++++++++++++---
drivers/net/ethernet/sfc/ef100_nic.c | 35 +++++++++----------------
drivers/net/ethernet/sfc/ef100_nic.h | 6 +++--
drivers/net/ethernet/sfc/ef100_vdpa.h | 5 ++--
4 files changed, 41 insertions(+), 31 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ef100_netdev.c b/drivers/net/ethernet/sfc/ef100_netdev.c
index d916877b5a9a..5d93e870d9b7 100644
--- a/drivers/net/ethernet/sfc/ef100_netdev.c
+++ b/drivers/net/ethernet/sfc/ef100_netdev.c
@@ -355,6 +355,28 @@ void ef100_remove_netdev(struct efx_probe_data *probe_data)
efx->state = STATE_PROBED;
}
+static void efx_ef100_update_tso_features(struct efx_nic *efx)
+{
+ struct ef100_nic_data *nic_data = efx->nic_data;
+ struct net_device *net_dev = efx->net_dev;
+ netdev_features_t tso;
+
+ if (!efx_ef100_has_cap(nic_data->datapath_caps2, TX_TSO_V3))
+ return;
+
+ tso = NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_PARTIAL |
+ NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM |
+ NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM;
+
+ net_dev->features |= tso;
+ net_dev->hw_features |= tso;
+ net_dev->hw_enc_features |= tso;
+ /* EF100 HW can only offload outer checksums if they are UDP,
+ * so for GRE_CSUM we have to use GSO_PARTIAL.
+ */
+ net_dev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
+}
+
int ef100_probe_netdev(struct efx_probe_data *probe_data)
{
struct efx_nic *efx = &probe_data->efx;
@@ -387,9 +409,7 @@ int ef100_probe_netdev(struct efx_probe_data *probe_data)
ESE_EF100_DP_GZ_TSO_MAX_HDR_NUM_SEGS_DEFAULT);
efx->mdio.dev = net_dev;
- rc = efx_ef100_init_datapath_caps(efx);
- if (rc < 0)
- goto fail;
+ efx_ef100_update_tso_features(efx);
rc = ef100_phy_probe(efx);
if (rc)
diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c
index 8cbe5e0f4bdf..ef6e295efcf7 100644
--- a/drivers/net/ethernet/sfc/ef100_nic.c
+++ b/drivers/net/ethernet/sfc/ef100_nic.c
@@ -161,7 +161,7 @@ int ef100_get_mac_address(struct efx_nic *efx, u8 *mac_address,
return 0;
}
-int efx_ef100_init_datapath_caps(struct efx_nic *efx)
+static int efx_ef100_init_datapath_caps(struct efx_nic *efx)
{
MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_CAPABILITIES_V7_OUT_LEN);
struct ef100_nic_data *nic_data = efx->nic_data;
@@ -197,25 +197,15 @@ int efx_ef100_init_datapath_caps(struct efx_nic *efx)
if (rc)
return rc;
- if (efx_ef100_has_cap(nic_data->datapath_caps2, TX_TSO_V3)) {
- struct net_device *net_dev = efx->net_dev;
- netdev_features_t tso = NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_PARTIAL |
- NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM |
- NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM;
-
- net_dev->features |= tso;
- net_dev->hw_features |= tso;
- net_dev->hw_enc_features |= tso;
- /* EF100 HW can only offload outer checksums if they are UDP,
- * so for GRE_CSUM we have to use GSO_PARTIAL.
- */
- net_dev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
- }
efx->num_mac_stats = MCDI_WORD(outbuf,
GET_CAPABILITIES_V4_OUT_MAC_STATS_NUM_STATS);
netif_dbg(efx, probe, efx->net_dev,
"firmware reports num_mac_stats = %u\n",
efx->num_mac_stats);
+
+ nic_data->vdpa_supported = efx_ef100_has_cap(nic_data->datapath_caps3,
+ CLIENT_CMD_VF_PROXY) &&
+ efx->type->is_vf;
return 0;
}
@@ -806,13 +796,6 @@ static char *bar_config_name[] = {
[EF100_BAR_CONFIG_VDPA] = "vDPA",
};
-#ifdef CONFIG_SFC_VDPA
-static bool efx_vdpa_supported(struct efx_nic *efx)
-{
- return efx->type->is_vf;
-}
-#endif
-
int efx_ef100_set_bar_config(struct efx_nic *efx,
enum ef100_bar_config new_config)
{
@@ -828,7 +811,7 @@ int efx_ef100_set_bar_config(struct efx_nic *efx,
#ifdef CONFIG_SFC_VDPA
/* Current EF100 hardware supports vDPA on VFs only */
- if (new_config == EF100_BAR_CONFIG_VDPA && !efx_vdpa_supported(efx)) {
+ if (new_config == EF100_BAR_CONFIG_VDPA && !nic_data->vdpa_supported) {
pci_err(efx->pci_dev, "vdpa over PF not supported : %s",
efx->name);
return -EOPNOTSUPP;
@@ -1208,6 +1191,12 @@ static int ef100_probe_main(struct efx_nic *efx)
goto fail;
}
+ rc = efx_ef100_init_datapath_caps(efx);
+ if (rc) {
+ pci_info(efx->pci_dev, "Unable to initialize datapath caps\n");
+ goto fail;
+ }
+
return 0;
fail:
return rc;
diff --git a/drivers/net/ethernet/sfc/ef100_nic.h b/drivers/net/ethernet/sfc/ef100_nic.h
index 4562982f2965..117a73d0795c 100644
--- a/drivers/net/ethernet/sfc/ef100_nic.h
+++ b/drivers/net/ethernet/sfc/ef100_nic.h
@@ -76,6 +76,9 @@ struct ef100_nic_data {
u32 datapath_caps3;
unsigned int pf_index;
u16 warm_boot_count;
+#ifdef CONFIG_SFC_VDPA
+ bool vdpa_supported; /* true if vdpa is supported on this PCIe FN */
+#endif
u8 port_id[ETH_ALEN];
DECLARE_BITMAP(evq_phases, EFX_MAX_CHANNELS);
enum ef100_bar_config bar_config;
@@ -95,9 +98,8 @@ struct ef100_nic_data {
};
#define efx_ef100_has_cap(caps, flag) \
- (!!((caps) & BIT_ULL(MC_CMD_GET_CAPABILITIES_V4_OUT_ ## flag ## _LBN)))
+ (!!((caps) & BIT_ULL(MC_CMD_GET_CAPABILITIES_V7_OUT_ ## flag ## _LBN)))
-int efx_ef100_init_datapath_caps(struct efx_nic *efx);
int ef100_phy_probe(struct efx_nic *efx);
int ef100_filter_table_probe(struct efx_nic *efx);
diff --git a/drivers/net/ethernet/sfc/ef100_vdpa.h b/drivers/net/ethernet/sfc/ef100_vdpa.h
index f6564448d0c7..90062fd8a25d 100644
--- a/drivers/net/ethernet/sfc/ef100_vdpa.h
+++ b/drivers/net/ethernet/sfc/ef100_vdpa.h
@@ -1,7 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
-/* Driver for Xilinx network controllers and boards
- * Copyright (C) 2020-2022, Xilinx, Inc.
- * Copyright (C) 2022, Advanced Micro Devices, Inc.
+/* Driver for AMD network controllers and boards
+ * Copyright (C) 2023, Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
--
2.30.1
Powered by blists - more mailing lists