[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20230308082424.140224-1-manivannan.sadhasivam@linaro.org>
Date: Wed, 8 Mar 2023 13:54:11 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: andersson@...nel.org, lpieralisi@...nel.org, robh@...nel.org,
kw@...ux.com, krzysztof.kozlowski+dt@...aro.org, vkoul@...nel.org
Cc: konrad.dybcio@...aro.org, bhelgaas@...gle.com, kishon@...nel.org,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v3 00/13] Add PCIe RC support to Qcom SDX55 SoC
Hi,
This series adds PCIe RC support to the Qcom SDX55 SoC. The PCIe controller
in SDX55 can act as both Root Complex and Endpoint but only one mode at a
time i.e., the mode cannot be switched during runtime.
This series has been tested on Thundercomm T55 board having QCA6390 WLAN
chipset connected to the PCIe controller. For powering up the WLAN chipset,
an out-of-tree patch has been used since we do not have a proper driver in
mainline to handle the power supplies.
NOTE: Even with this series, I couldn't get network connectivity using
QCA6390. But that's due to ath11k regression for which I've filed a bug
report: https://bugzilla.kernel.org/show_bug.cgi?id=217070
Merging strategy
----------------
PCI and binding patches through PCI tree
PHY patches through PHY tree
Devicetree patches through Qcom tree
Thanks,
Mani
Changes in v3:
* Removed "iommus" property from binding and dtsi file
* Fixed the PCIe I/O range
* Rebased on top of v6.3-rc1
* Collected reviews
Changes in v2:
* Added patch to move status property down
* Added patch to list property values vertically
* Addressed comments from Konrad
* Collected review tags
* Fixed review tag for dts patch
Manivannan Sadhasivam (13):
dt-bindings: PCI: qcom: Update maintainers entry
dt-bindings: PCI: qcom: Add iommu-map properties
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55-t55: Move "status" property down
phy: qcom-qmp-pcie: Split out EP related init sequence for SDX55
phy: qcom-qmp-pcie: Add RC init sequence for SDX55
PCI: qcom: Add support for SDX55 SoC
.../devicetree/bindings/pci/qcom,pcie-ep.yaml | 2 +-
.../devicetree/bindings/pci/qcom,pcie.yaml | 32 +++-
arch/arm/boot/dts/qcom-sdx55-t55.dts | 50 ++++-
.../boot/dts/qcom-sdx55-telit-fn980-tlb.dts | 2 +-
arch/arm/boot/dts/qcom-sdx55.dtsi | 178 +++++++++++++-----
drivers/pci/controller/dwc/pcie-qcom.c | 4 +-
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 91 +++++++--
.../qualcomm/phy-qcom-qmp-pcs-pcie-v4_20.h | 2 +
8 files changed, 297 insertions(+), 64 deletions(-)
--
2.25.1
Powered by blists - more mailing lists