| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20230308095209.14700-3-clamor95@gmail.com>
Date: Wed, 8 Mar 2023 11:52:09 +0200
From: Svyatoslav Ryhel <clamor95@...il.com>
To: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Svyatoslav Ryhel <clamor95@...il.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Jean Delvare <jdelvare@...e.de>,
Sebastian Reichel <sebastian.reichel@...labora.com>,
Daniel Jeong <gshark.jeong@...il.com>,
Ldd-Mlp <ldd-mlp@...t.ti.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v1 2/2] media: lm3560: convent to OF
If no pdata is available, try to read from device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@...il.com>
---
drivers/media/i2c/lm3560.c | 128 +++++++++++++++++++++++++++----------
1 file changed, 93 insertions(+), 35 deletions(-)
diff --git a/drivers/media/i2c/lm3560.c b/drivers/media/i2c/lm3560.c
index 5ef613604be7..5541051616b7 100644
--- a/drivers/media/i2c/lm3560.c
+++ b/drivers/media/i2c/lm3560.c
@@ -11,6 +11,7 @@
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/mutex.h>
@@ -22,16 +23,16 @@
/* registers definitions */
#define REG_ENABLE 0x10
-#define REG_TORCH_BR 0xa0
-#define REG_FLASH_BR 0xb0
-#define REG_FLASH_TOUT 0xc0
+#define REG_TORCH_BR 0xa0
+#define REG_FLASH_BR 0xb0
+#define REG_FLASH_TOUT 0xc0
#define REG_FLAG 0xd0
#define REG_CONFIG1 0xe0
/* fault mask */
-#define FAULT_TIMEOUT (1<<0)
-#define FAULT_OVERTEMP (1<<1)
-#define FAULT_SHORT_CIRCUIT (1<<2)
+#define FAULT_TIMEOUT BIT(0)
+#define FAULT_OVERTEMP BIT(1)
+#define FAULT_SHORT_CIRCUIT BIT(2)
enum led_enable {
MODE_SHDN = 0x0,
@@ -54,6 +55,7 @@ struct lm3560_flash {
struct device *dev;
struct lm3560_platform_data *pdata;
struct regmap *regmap;
+ struct gpio_desc *hwen_gpio;
struct mutex lock;
enum v4l2_flash_led_mode led_mode;
@@ -356,12 +358,19 @@ static int lm3560_subdev_init(struct lm3560_flash *flash,
flash->subdev_led[led_no].flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
strscpy(flash->subdev_led[led_no].name, led_name,
sizeof(flash->subdev_led[led_no].name));
+
rval = lm3560_init_controls(flash, led_no);
- if (rval)
+ if (rval) {
+ dev_err(flash->dev, "failed to init controls: %d\n", rval);
goto err_out;
+ }
+
rval = media_entity_pads_init(&flash->subdev_led[led_no].entity, 0, NULL);
- if (rval < 0)
+ if (rval < 0) {
+ dev_err(flash->dev, "failed to init media entity pads: %d\n", rval);
goto err_out;
+ }
+
flash->subdev_led[led_no].entity.function = MEDIA_ENT_F_FLASH;
return rval;
@@ -391,6 +400,49 @@ static int lm3560_init_device(struct lm3560_flash *flash)
return rval;
}
+static int lm3560_of_probe(struct lm3560_flash *flash)
+{
+ struct lm3560_platform_data *pdata;
+ struct fwnode_handle *node;
+ int ret, reg;
+
+ pdata = devm_kzalloc(flash->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENODEV;
+
+ ret = device_property_read_u32(flash->dev,
+ "ti,peak-current", &pdata->peak);
+ if (ret)
+ pdata->peak = LM3560_PEAK_3600mA;
+
+ ret = device_property_read_u32(flash->dev,
+ "ti,max-flash-timeout",
+ &pdata->max_flash_timeout);
+ if (ret)
+ pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
+
+ device_for_each_child_node(flash->dev, node) {
+ fwnode_property_read_u32(node, "reg", ®);
+
+ if (reg == LM3560_LED0 || reg == LM3560_LED1) {
+ ret = device_property_read_u32(flash->dev,
+ "ti,max-flash-current",
+ &pdata->max_flash_brt[reg]);
+ if (ret)
+ pdata->max_flash_brt[reg] = LM3560_FLASH_TOUT_MAX;
+
+ ret = device_property_read_u32(flash->dev,
+ "ti,max-torch-current",
+ &pdata->max_torch_brt[reg]);
+ if (ret)
+ pdata->max_torch_brt[reg] = LM3560_TORCH_BRT_MAX;
+ }
+ }
+ flash->pdata = pdata;
+
+ return 0;
+}
+
static int lm3560_probe(struct i2c_client *client)
{
struct lm3560_flash *flash;
@@ -398,44 +450,41 @@ static int lm3560_probe(struct i2c_client *client)
int rval;
flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
- if (flash == NULL)
+ if (!flash)
return -ENOMEM;
flash->regmap = devm_regmap_init_i2c(client, &lm3560_regmap);
- if (IS_ERR(flash->regmap)) {
- rval = PTR_ERR(flash->regmap);
- return rval;
- }
+ if (IS_ERR(flash->regmap))
+ return dev_err_probe(&client->dev, PTR_ERR(flash->regmap),
+ "failed to init regmap\n");
- /* if there is no platform data, use chip default value */
- if (pdata == NULL) {
- pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
- if (pdata == NULL)
- return -ENODEV;
- pdata->peak = LM3560_PEAK_3600mA;
- pdata->max_flash_timeout = LM3560_FLASH_TOUT_MAX;
- /* led 1 */
- pdata->max_flash_brt[LM3560_LED0] = LM3560_FLASH_BRT_MAX;
- pdata->max_torch_brt[LM3560_LED0] = LM3560_TORCH_BRT_MAX;
- /* led 2 */
- pdata->max_flash_brt[LM3560_LED1] = LM3560_FLASH_BRT_MAX;
- pdata->max_torch_brt[LM3560_LED1] = LM3560_TORCH_BRT_MAX;
- }
- flash->pdata = pdata;
flash->dev = &client->dev;
mutex_init(&flash->lock);
+ /* if there is no platform data, try to read from device tree */
+ if (!pdata)
+ lm3560_of_probe(flash);
+
+ flash->hwen_gpio = devm_gpiod_get_optional(flash->dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(flash->hwen_gpio))
+ return dev_err_probe(&client->dev, PTR_ERR(flash->hwen_gpio),
+ "failed to get hwen gpio\n");
+
rval = lm3560_subdev_init(flash, LM3560_LED0, "lm3560-led0");
if (rval < 0)
- return rval;
+ return dev_err_probe(&client->dev, rval,
+ "failed to init led0 subdev\n");
rval = lm3560_subdev_init(flash, LM3560_LED1, "lm3560-led1");
if (rval < 0)
- return rval;
+ return dev_err_probe(&client->dev, rval,
+ "failed to init led1 subdev\n");
rval = lm3560_init_device(flash);
if (rval < 0)
- return rval;
+ return dev_err_probe(&client->dev, rval,
+ "failed to init device\n");
i2c_set_clientdata(client, flash);
@@ -452,21 +501,30 @@ static void lm3560_remove(struct i2c_client *client)
v4l2_ctrl_handler_free(&flash->ctrls_led[i]);
media_entity_cleanup(&flash->subdev_led[i].entity);
}
+
+ gpiod_set_value_cansleep(flash->hwen_gpio, 0);
}
+static const struct of_device_id lm3560_match[] = {
+ { .compatible = "ti,lm3559" },
+ { .compatible = "ti,lm3560" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lm3560_match);
+
static const struct i2c_device_id lm3560_id_table[] = {
{LM3559_NAME, 0},
{LM3560_NAME, 0},
{}
};
-
MODULE_DEVICE_TABLE(i2c, lm3560_id_table);
static struct i2c_driver lm3560_i2c_driver = {
.driver = {
- .name = LM3560_NAME,
- .pm = NULL,
- },
+ .name = LM3560_NAME,
+ .pm = NULL,
+ .of_match_table = lm3560_match,
+ },
.probe_new = lm3560_probe,
.remove = lm3560_remove,
.id_table = lm3560_id_table,
--
2.37.2
Powered by blists - more mailing lists