linux-kernel - [PATCH v1 07/25] arm64: dts: colibri-imx8x: Split pinctrl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20230308125300.58244-8-dev@pschenker.ch>
Date:   Wed,  8 Mar 2023 13:52:41 +0100
From:   Philippe Schenker <dev@...henker.ch>
To:     devicetree@...r.kernel.org, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>
Cc:     NXP Linux Team <linux-imx@....com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Frank Rowand <frowand.list@...il.com>,
        linux-arm-kernel@...ts.infradead.org,
        Fabio Estevam <festevam@...il.com>,
        Philippe Schenker <philippe.schenker@...adex.com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v1 07/25] arm64: dts: colibri-imx8x: Split pinctrl_hog1

From: Philippe Schenker <philippe.schenker@...adex.com>

Split pinctrl_hog1 into a second group so CSI_MCLK can be muxed to a
gpio on its own.

Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
---

 arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index e1b907b7a85d..432449359625 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -119,7 +119,8 @@ &usdhc2 {
 
 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>;
+	pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>,
+		    <&pinctrl_hog2>;
 
 	/* On-module touch pen-down interrupt */
 	pinctrl_ad7879_int: ad7879intgrp {
@@ -253,6 +254,10 @@ pinctrl_hog1: hog1grp {
 			   <IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16			0x20>;		/* SODIMM  93 */
 	};
 
+	pinctrl_hog2: hog2grp {
+		fsl,pins = <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01			0x20>;		/* SODIMM  75 */
+	};
+
 	/*
 	 * This pin is used in the SCFW as a UART. Using it from
 	 * Linux would require rewritting the SCFW board file.
-- 
2.39.2