[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bfb859da-ea8e-50a1-81b0-7f84a55e930f@linaro.org>
Date: Wed, 8 Mar 2023 14:13:06 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Svyatoslav Ryhel <clamor95@...il.com>,
Mark Brown <broonie@...nel.org>
Cc: Guenter Roeck <linux@...ck-us.net>,
Jean Delvare <jdelvare@...e.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 1/2] dt-bindings: hwmon: ina2xx: add supply property
On 08/03/2023 13:58, Svyatoslav Ryhel wrote:
>
>
> 8 березня 2023 р. 14:54:34 GMT+02:00, Mark Brown <broonie@...nel.org> написав(-ла):
>> On Wed, Mar 08, 2023 at 11:40:23AM +0200, Svyatoslav Ryhel wrote:
>>> Add supply property.
>>
>>> + vdd-supply: true
>>> +
>>> required:
>>> - compatible
>>> - reg
>>
>> Unless the device can work without power the supply should be required.
>
> Device can work without supply defined on most devices,
Are you sure they can work without any power? INA231 does not say VS
supply is optional. Datasheet says:
"The INA231 is typically powered by a separate supply that can range
from 2.7 V to 5.5 V."
Although it uses word "typically" which could suggest other design, but
are you sure it can work without it? From where it gets the power?
> but in my case power is gated with gpio and devices will not work
without fixed regulator.
BTW, wrap your lines to match mailing list style.
Best regards,
Krzysztof
Powered by blists - more mailing lists