Message-ID: <fa9cfc41-1d6c-1003-e6d9-6a1545487177@gmail.com>
Date:   Wed, 8 Mar 2023 14:59:38 +0100
From:   Maximilian Luz <luzmaximilian@...il.com>
To:     Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
        Bjorn Andersson <andersson@...nel.org>
Cc:     Andy Gross <agross@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Ard Biesheuvel <ardb@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Johan Hovold <johan@...nel.org>,
        Sudeep Holla <sudeep.holla@....com>,
        Ilias Apalodimas <ilias.apalodimas@...aro.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Sumit Garg <sumit.garg@...aro.org>,
        Steev Klimaszewski <steev@...i.org>,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/4] firmware: Add support for Qualcomm Secure
 Execution Environment SCM interface

On 3/7/23 16:32, Dmitry Baryshkov wrote:
> On 05/03/2023 04:21, Maximilian Luz wrote:

[...]

>> +/* -- DMA helpers. ---------------------------------------------------------- */
>> +
>> +/* DMA requirements for QSEECOM SCM calls. */
>> +#define QSEECOM_DMA_ALIGNMENT        8
>> +#define QSEECOM_DMA_ALIGN(ptr)        ALIGN(ptr, QSEECOM_DMA_ALIGNMENT)
>> +
>> +/**
>> + * struct qseecom_dma - DMA memory region.
>> + * @size: Size of the memory region, in bytes.
>> + * @virt: Pointer / virtual address to the memory, accessible by the kernel.
>> + * @phys: Physical address of the memory region.
>> + */
>> +struct qseecom_dma {
>> +    unsigned long size;
> 
> size_t ?

Will fix.

>> +    void *virt;
>> +    dma_addr_t phys;
>> +};
> 
> Do we really need this wrapper and the wrappers bellow? They look like a pure syntax sugar for me, hiding the dma functions from the user.

The idea was that they take care of proper allocation. The Windows driver that
I've reverse-engineered this from allocates memory in multiples of PAGE_SIZE,
so I believe that this might be a requirement (at least on some systems). These
functions are there to ensure that and with that prevent potential bugs by
taking that responsibility from the caller.

>> +
>> +/**
>> + * qseecom_dma_alloc() - Allocate a DMA-able memory region suitable for QSEECOM
>> + * SCM calls.
>> + * @dev:  The device used for DMA memory allocation.
>> + * @dma:  Where to write the allocated memory addresses and size to.
>> + * @size: Minimum size of the memory to be allocated.
>> + * @gfp:  Flags used for allocation.
>> + *
>> + * Allocate a DMA-able memory region suitable for interaction with SEE
>> + * services/applications and the TzOS. The provided size is treated as the
>> + * minimum required size and rounded up, if necessary. The actually allocated
>> + * memory region will be stored in @dma. Allocated memory must be freed via
>> + * qseecom_dma_free().
>> + *
>> + * Return: Returns zero on success, -ENOMEM on allocation failure.
>> + */
>> +static inline int qseecom_dma_alloc(struct device *dev, struct qseecom_dma *dma,
>> +                    unsigned long size, gfp_t gfp)
> 
> size_t size
> 
> gfp is not used

Right, that should have been passed to dma_alloc_coherent(). Will fix that.

>> +{
>> +    size = PAGE_ALIGN(size);
>> +
>> +    dma->virt = dma_alloc_coherent(dev, size, &dma->phys, GFP_KERNEL);
>> +    if (!dma->virt)
>> +        return -ENOMEM;
>> +
>> +    dma->size = size;
>> +    return 0;
>> +}
>> +
>> +/**
>> + * qseecom_dma_free() - Free a DMA memory region.
>> + * @dev: The device used for allocation.
>> + * @dma: The DMA region to be freed.
>> + *
>> + * Free a DMA region previously allocated via qseecom_dma_alloc(). Note that
>> + * freeing sub-regions is not supported.
>> + */
>> +static inline void qseecom_dma_free(struct device *dev, struct qseecom_dma *dma)
>> +{
>> +    dma_free_coherent(dev, dma->size, dma->virt, dma->phys);
>> +}
>> +
>> +/**
>> + * qseecom_dma_realloc() - Re-allocate DMA memory region with the requested size.
>> + * @dev:  The device used for allocation.
>> + * @dma:  The region descriptor to be updated.
>> + * @size: The new requested size.
>> + * @gfp:  Flags used for allocation.
>> + *
>> + * Re-allocates a DMA memory region suitable for QSEECOM SCM calls to fit the
>> + * requested amount of bytes, if necessary. Does nothing if the provided region
>> + * already has enough space to store the requested data.
>> + *
>> + * See qseecom_dma_alloc() for details.
>> + *
>> + * Return: Returns zero on success, -ENOMEM on allocation failure.
>> + */
>> +static inline int qseecom_dma_realloc(struct device *dev, struct qseecom_dma *dma,
>> +                      unsigned long size, gfp_t gfp)
>> +{
>> +    if (PAGE_ALIGN(size) <= dma->size)
>> +        return 0;
>> +
>> +    qseecom_dma_free(dev, dma);
>> +    return qseecom_dma_alloc(dev, dma, size, gfp);
>> +}
> 
> I'll comment on this function when commenting patch 4.
> 
>> +
>> +/**
>> + * qseecom_dma_aligned() - Create a aligned DMA memory sub-region suitable for
>> + * QSEECOM SCM calls.
>> + * @base:   Base DMA memory region, in which the new region will reside.
>> + * @out:    Descriptor to store the aligned sub-region in.
>> + * @offset: The offset inside base region at which to place the new sub-region.
>> + *
>> + * Creates an aligned DMA memory region suitable for QSEECOM SCM calls at or
>> + * after the given offset. The size of the sub-region will be set to the
>> + * remaining size in the base region after alignment, i.e., the end of the
>> + * sub-region will be equal the end of the base region.
>> + *
>> + * Return: Returns zero on success or -EINVAL if the new aligned memory address
>> + * would point outside the base region.
>> + */
>> +static inline int qseecom_dma_aligned(const struct qseecom_dma *base, struct qseecom_dma *out,
>> +                      unsigned long offset)
>> +{
>> +    void *aligned = (void *)QSEECOM_DMA_ALIGN((uintptr_t)base->virt + offset);
>> +
>> +    if (aligned - base->virt > base->size)
>> +        return -EINVAL;
>> +
>> +    out->virt = aligned;
>> +    out->phys = base->phys + (out->virt - base->virt);
>> +    out->size = base->size - (out->virt - base->virt);
>> +
>> +    return 0;
>> +}
>> +
>> +
>> +/* -- Common interface. ----------------------------------------------------- */
>> +
>> +struct qseecom_device {
>> +    struct device *dev;
>> +    struct mutex scm_call_lock;    /* Guards QSEECOM SCM calls. */
> 
> There can be only one instance of the qseecom call infrastructure. Make this mutex static in the qcom_scm.c

Right, will do that.

>> +};
>> +
>> +
>> +/* -- Secure-OS SCM call interface. ----------------------------------------- */
>> +
>> +#define QSEECOM_TZ_OWNER_TZ_APPS        48
>> +#define QSEECOM_TZ_OWNER_QSEE_OS        50
>> +
>> +#define QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER    0
>> +#define QSEECOM_TZ_SVC_APP_MGR            1
>> +
>> +enum qseecom_scm_result {
>> +    QSEECOM_RESULT_SUCCESS            = 0,
>> +    QSEECOM_RESULT_INCOMPLETE        = 1,
>> +    QSEECOM_RESULT_BLOCKED_ON_LISTENER    = 2,
>> +    QSEECOM_RESULT_FAILURE            = 0xFFFFFFFF,
>> +};
>> +
>> +enum qseecom_scm_resp_type {
>> +    QSEECOM_SCM_RES_APP_ID            = 0xEE01,
>> +    QSEECOM_SCM_RES_QSEOS_LISTENER_ID    = 0xEE02,
>> +};
>> +
>> +/**
>> + * struct qseecom_scm_resp - QSEECOM SCM call response.
>> + * @status:    Status of the SCM call. See &enum qseecom_scm_result.
>> + * @resp_type: Type of the response. See &enum qseecom_scm_resp_type.
>> + * @data:      Response data. The type of this data is given in @resp_type.
>> + */
>> +struct qseecom_scm_resp {
>> +    u64 status;
>> +    u64 resp_type;
>> +    u64 data;
>> +};
>> +
>> +int qseecom_scm_call(struct qseecom_device *qsee, const struct qcom_scm_desc *desc,
>> +             struct qseecom_scm_resp *res);
>> +
>> +
>> +/* -- Secure App interface. ------------------------------------------------- */
>> +
>> +#define QSEECOM_MAX_APP_NAME_SIZE            64
>> +
>> +int qseecom_app_get_id(struct qseecom_device *qsee, const char *app_name, u32 *app_id);
>> +int qseecom_app_send(struct qseecom_device *qsee, u32 app_id, struct qseecom_dma *req,
>> +             struct qseecom_dma *rsp);
> 
> I think that only these calls should be made public / available to other modules. qseecom_scm_call also is an internal helper.

So move all calls to qcom_scm and only make these two public? Or move only
qseecom_scm_call() to qcom_scm (which would require to make it public there,
however). Or how would you want this to look?

>> +
>> +#endif /* _LINUX_QCOM_QSEECOM_H */
> 

Regards,
Max

Powered by blists - more mailing lists