[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1e4ff264-523e-7d40-f487-5ed535a520ea@baylibre.com>
Date: Thu, 9 Mar 2023 18:14:46 +0100
From: Amjad Ouled-Ameur <aouledameur@...libre.com>
To: Daniel Lezcano <daniel.lezcano@...aro.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
Fabien Parent <fparent@...libre.com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Rob Herring <robh@...nel.org>,
Markus Schneider-Pargmann <msp@...libre.com>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Michael Kao <michael.kao@...iatek.com>
Subject: Re: [PATCH v9 2/5] thermal: mediatek: control buffer enablement
tweaks
Hi Daniel,
On 1/27/23 22:48, Daniel Lezcano wrote:
> On 27/01/2023 16:44, Amjad Ouled-Ameur wrote:
>> From: Markus Schneider-Pargmann <msp@...libre.com>
>>
>> Add logic in order to be able to turn on the control buffer on MT8365.
>> This change now allows to have control buffer support for MTK_THERMAL_V1,
>> and it allows to define the register offset, and mask used to enable it.
>>
>> Signed-off-by: Markus Schneider-Pargmann <msp@...libre.com>
>> Signed-off-by: Fabien Parent <fparent@...libre.com>
>> Signed-off-by: Amjad Ouled-Ameur <aouledameur@...libre.com>
>> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
>> ---
>> drivers/thermal/mtk_thermal.c | 25 ++++++++++++++++++-------
>> 1 file changed, 18 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
>> index 8440692e3890..d8ddceb75372 100644
>> --- a/drivers/thermal/mtk_thermal.c
>> +++ b/drivers/thermal/mtk_thermal.c
>> @@ -271,6 +271,9 @@ struct mtk_thermal_data {
>> bool need_switch_bank;
>> struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
>> enum mtk_thermal_version version;
>> + u32 apmixed_buffer_ctl_reg;
>> + u32 apmixed_buffer_ctl_mask;
>> + u32 apmixed_buffer_ctl_set;
>> };
>> struct mtk_thermal {
>> @@ -514,6 +517,9 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>> .adcpnp = mt7622_adcpnp,
>> .sensor_mux_values = mt7622_mux_values,
>> .version = MTK_THERMAL_V2,
>> + .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
>> + .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
>> + .apmixed_buffer_ctl_set = BIT(0),
>> };
>> /*
>> @@ -963,14 +969,18 @@ static const struct of_device_id mtk_thermal_of_match[] = {
>> };
>> MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
>> -static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
>> +static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
>> + void __iomem *apmixed_base)
>> {
>> - int tmp;
>> + u32 tmp;
>> +
>> + if (!mt->conf->apmixed_buffer_ctl_reg)
>> + return;
>> - tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
>> - tmp &= ~(0x37);
>> - tmp |= 0x1;
>> - writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
>> + tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
>> + tmp &= mt->conf->apmixed_buffer_ctl_mask;
>> + tmp |= mt->conf->apmixed_buffer_ctl_set;
>> + writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
>> udelay(200);
>> }
>> @@ -1070,8 +1080,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>> goto err_disable_clk_auxadc;
>> }
>> + mtk_thermal_turn_on_buffer(mt, apmixed_base);
>> +
>> if (mt->conf->version == MTK_THERMAL_V2) {
>> - mtk_thermal_turn_on_buffer(apmixed_base);
>> mtk_thermal_release_periodic_ts(mt, auxadc_base);
>> }
>
> This change conflicts with commit 4f2ee0aa2e706
>
> I fixed it with:
>
> - if (mt->conf->version != MTK_THERMAL_V1) {
> - mtk_thermal_turn_on_buffer(apmixed_base);
> + mtk_thermal_turn_on_buffer(apmixed_base);
This should rather be "mtk_thermal_turn_on_buffer(mt, apmixed_base);" as this patch
also adds mtk_thermal arg to the function.
Regards,
Amjad
> +
> + if (mt->conf->version != MTK_THERMAL_V1)
> mtk_thermal_release_periodic_ts(mt, auxadc_base);
> - }
>
> Let me know if there is something wrong.
>
>
Powered by blists - more mailing lists