linux-kernel - Re: [PATCH v2 2/2] i2c: mpc: Use i2c-scl-clk-low-timeout-ms i2c property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <5c90f0d3-3085-e71a-3277-99ab2d694fcd@alliedtelesis.co.nz>
Date:   Sun, 12 Mar 2023 20:20:07 +0000
From:   Chris Packham <Chris.Packham@...iedtelesis.co.nz>
To:     Andi Shyti <andi.shyti@...nel.org>,
        "linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
CC:     Wolfram Sang <wsa@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@...aro.org>,
        Ryan Chen <ryan_chen@...eedtech.com>
Subject: Re: [PATCH v2 2/2] i2c: mpc: Use i2c-scl-clk-low-timeout-ms i2c
 property


On 13/03/23 03:55, Andi Shyti wrote:
> "fsl,timeout" is marked as deprecated and replaced by the
> "i2c-scl-clk-low-timeout-ms" i2c property.
>
> Use this latter and, in case it is missing, for back
> compatibility, check whether we still have "fsl,timeout" defined.
>
> Signed-off-by: Andi Shyti <andi.shyti@...nel.org>
> ---
>   drivers/i2c/busses/i2c-mpc.c | 11 ++++++++++-
>   1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 81ac92bb4f6f..fe6279a353c6 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -846,7 +846,16 @@ static int fsl_i2c_probe(struct platform_device *op)
>   			mpc_i2c_setup_8xxx(op->dev.of_node, i2c, clock);
>   	}
>   
> -	prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
> +	prop = of_get_property(op->dev.of_node,
> +			       "i2c-scl-clk-low-timeout-ms", &plen);
> +
> +	/*
> +	 * ensuring back compatibility as
> +	 * "fsl,timeout" is marked as deprecated
> +	 */
> +	if (!prop)
> +		prop = of_get_property(op->dev.of_node, "fsl,timeout", &plen);
> +
>   	if (prop && plen == sizeof(u32)) {
>   		mpc_ops.timeout = *prop * HZ / 1000000;
>   		if (mpc_ops.timeout < 5)

While you're here it might make sense to clean this up to use 
of_property_read_u32().

With or without that additional cleanup:

Reviewed-by: Chris Packham <chris.packham@...iedtelesis.co.nz>