lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 13 Mar 2023 10:07:50 +0800
From:   Dongliang Mu <mudongliangabcd@...il.com>
To:     Krishna Kurapati <quic_kriskura@...cinc.com>
Cc:     Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Felipe Balbi <balbi@...nel.org>, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, quic_pkondeti@...cinc.com,
        quic_ppratap@...cinc.com, quic_wcheng@...cinc.com,
        quic_jackp@...cinc.com, quic_harshq@...cinc.com,
        ahalaney@...hat.com, quic_shazhuss@...cinc.com
Subject: Re: [PATCH 3/8] usb: dwc3: core: Skip setting event buffers for host
 only controllers

On Sat, Mar 11, 2023 at 12:40 AM Krishna Kurapati
<quic_kriskura@...cinc.com> wrote:
>
> On some SoC's like SA8295P where the teritiary controller is host-only
> capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
> Trying to setup them up during core_init leads to a crash.
>
> For DRD/Peripheral supported controllers, event buffer setup is done
> again in gadget_pullup. Skip setup or cleanup of event buffers if
> controller is host-only capable.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
>  drivers/usb/dwc3/core.c | 20 ++++++++++++++------
>  1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 076c0f8a4441..1ca9fa40a66e 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -840,7 +840,11 @@ static void dwc3_clk_disable(struct dwc3 *dwc)
>
>  static void dwc3_core_exit(struct dwc3 *dwc)
>  {
> -       dwc3_event_buffers_cleanup(dwc);
> +       unsigned int    hw_mode;
> +
> +       hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
> +       if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
> +               dwc3_event_buffers_cleanup(dwc);

quick question about dwc3_event_buffers_cleanup, there are other
similar sites calling this function.

C symbol: dwc3_event_buffers_cleanup

  File   Function                   Line
0 core.h <global>                   1546 void
dwc3_event_buffers_cleanup(struct dwc3 *dwc);
1 core.c __dwc3_set_mode             152 dwc3_event_buffers_cleanup(dwc);
2 core.c dwc3_event_buffers_cleanup  522 void
dwc3_event_buffers_cleanup(struct dwc3 *dwc)
3 core.c dwc3_core_exit              842 dwc3_event_buffers_cleanup(dwc);
4 core.c dwc3_probe                 1936 dwc3_event_buffers_cleanup(dwc);
5 drd.c  dwc3_otg_update             363 dwc3_event_buffers_cleanup(dwc);
6 drd.c  dwc3_drd_exit               607 dwc3_event_buffers_cleanup(dwc);

For 1, 5, and 6, any need to take care of this situation?

>
>         usb_phy_set_suspend(dwc->usb2_phy, 1);
>         usb_phy_set_suspend(dwc->usb3_phy, 1);
> @@ -1177,10 +1181,12 @@ static int dwc3_core_init(struct dwc3 *dwc)
>         if (ret < 0)
>                 goto err3;
>
> -       ret = dwc3_event_buffers_setup(dwc);
> -       if (ret) {
> -               dev_err(dwc->dev, "failed to setup event buffers\n");
> -               goto err4;
> +       if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) {
> +               ret = dwc3_event_buffers_setup(dwc);
> +               if (ret) {
> +                       dev_err(dwc->dev, "failed to setup event buffers\n");
> +                       goto err4;
> +               }
>         }
>
>         /*
> @@ -2008,7 +2014,9 @@ static int dwc3_probe(struct platform_device *pdev)
>
>  err5:
>         dwc3_debugfs_exit(dwc);
> -       dwc3_event_buffers_cleanup(dwc);
> +
> +       if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST)
> +               dwc3_event_buffers_cleanup(dwc);
>
>         usb_phy_set_suspend(dwc->usb2_phy, 1);
>         usb_phy_set_suspend(dwc->usb3_phy, 1);
> --
> 2.39.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ