| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 14 Mar 2023 14:28:34 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Marijn Suijten <marijn.suijten@...ainline.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: [PATCH v2 1/2] arm64: dts: qcom: msm8998-yoshino: Use SONY GPIO
names
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the Yoshino devices DTs to better document the hardware.
Lilac and Poplar have identical pin assignments.
Diff between these two and maple:
TLMM:
- "NC",
+ "TS_VDDIO_EN",
PMI8998:
- "NC"
+ "USB_SWITCH_SEL"
- "NC"
+ "4K_DISP_DCDC_EN"
PM8005:
- "NC"
+ "EAR_EN"
Which is probably due to Maple being designed and released quite a bit
earlier than the other two and it having a super high tech true-4K
display.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
.../dts/qcom/msm8998-sony-xperia-yoshino-maple.dts | 175 ++++++++++++++++++
.../boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 199 +++++++++++++++++++++
2 files changed, 374 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
index 1868ad649415..8b6a718835c7 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts
@@ -37,7 +37,29 @@ &lab {
qcom,soft-start-us = <200>;
};
+&pm8005_gpios {
+ gpio-line-names = "EAR_EN", /* GPIO_1 */
+ "NC",
+ "SLB",
+ "OPTION_1_PM8005";
+};
+
&pmi8998_gpios {
+ gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+ "NC",
+ "NC",
+ "TYPEC_UUSB_SEL",
+ "VIB_LDO_EN",
+ "NC",
+ "DISPLAY_TYPE_SEL",
+ "USB_SWITCH_SEL",
+ "NC",
+ "4K_DISP_DCDC_EN", /* GPIO_10 */
+ "NC",
+ "DIV_CLK3",
+ "SPMI_I2C_SEL",
+ "NC";
+
disp_dvdd_en: disp-dvdd-en-active-state {
pins = "gpio10";
function = "normal";
@@ -49,6 +71,159 @@ disp_dvdd_en: disp-dvdd-en-active-state {
};
};
+&tlmm {
+ gpio-line-names = "", /* GPIO_0 */
+ "",
+ "",
+ "",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "MDP_VSYNC_P", /* GPIO_10 */
+ "RGBC_IR_INT",
+ "NFC_VEN",
+ "CAM_MCLK0",
+ "CAM_MCLK1",
+ "NC",
+ "NC",
+ "CCI_I2C_SDA0",
+ "CCI_I2C_SCL0",
+ "CCI_I2C_SDA1",
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "MAIN_CAM_PWR_EN",
+ "TOF_INT_N",
+ "NC",
+ "NC",
+ "CHAT_CAM_PWR_EN",
+ "NC",
+ "TOF_RESET_N",
+ "CAM2_RSTN",
+ "NC",
+ "CAM1_RSTN", /* GPIO_30 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "CC_DIR",
+ "UIM2_DETECT_EN",
+ "FP_RESET_N", /* GPIO_40 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "BT_HCI_UART_TXD",
+ "BT_HCI_UART_RXD",
+ "BT_HCI_UART_CTS_N",
+ "BT_HCI_UART_RFR_N",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "NC",
+ "CODEC_INT2_N",
+ "CODEC_INT1_N",
+ "APPS_I2C_SDA",
+ "APPS_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "TRAY2_DET_DS",
+ "CODEC_RST_N",
+ "WSA_L_EN",
+ "WSA_R_EN",
+ "NC",
+ "NC",
+ "NC",
+ "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+ "LPASS_SLIMBUS_DATA0",
+ "LPASS_SLIMBUS_DATA1",
+ "BT_FM_SLIMBUS_DATA",
+ "BT_FM_SLIMBUS_CLK",
+ "NC",
+ "RF_LCD_ID_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO_80 */
+ "SW_SERVICE",
+ "TX_GTR_THRES_IN",
+ "HW_ID0",
+ "HW_ID1",
+ "NC",
+ "NC",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "NC", /* GPIO_90 */
+ "NC",
+ "NFC_IRQ",
+ "NFC_DWLD_EN",
+ "DISP_RESET_N",
+ "TRAY2_DET",
+ "CAM_SOF",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "DEBUG_GPIO0",
+ "DEBUG_GPIO1", /* GPIO_100 */
+ "GRFC4",
+ "NC",
+ "NC",
+ "RSVD",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RST",
+ "UIM1_PRESENT",
+ "UIM_BATT_ALARM",
+ "RSVD",
+ "NC",
+ "NC",
+ "ACCEL_INT",
+ "GYRO_INT",
+ "COMPASS_INT",
+ "ALS_PROX_INT_N", /* GPIO_120 */
+ "FP_INT_N",
+ "NC",
+ "BAROMETER_INT",
+ "ACC_COVER_OPEN",
+ "TS_INT_N",
+ "NC",
+ "NC",
+ "USB_DETECT_EN",
+ "NC",
+ "QLINK_REQUEST", /* GPIO_130 */
+ "QLINK_ENABLE",
+ "NC",
+ "TS_VDDIO_EN",
+ "WMSS_RESET_N",
+ "PA_INDICATOR_OR",
+ "NC",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK", /* GPIO_140 */
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "MSS_LTE_COXM_TXD",
+ "MSS_LTE_COXM_RXD",
+ "RFFE2_DATA",
+ "RFFE2_CLK",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
+};
+
&vreg_l22a_2p85 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 820414758888..ede12a583236 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -292,6 +292,13 @@ &lab {
regulator-soft-start;
};
+&pm8005_gpios {
+ gpio-line-names = "NC", /* GPIO_1 */
+ "NC",
+ "SLB",
+ "OPTION_1_PM8005";
+};
+
&pm8005_regulators {
/* VDD_GFX supply */
pm8005_s1: s1 {
@@ -304,6 +311,33 @@ pm8005_s1: s1 {
};
&pm8998_gpios {
+ gpio-line-names = "UIM_BATT_ALARM", /* GPIO_1 */
+ "NC",
+ "WLAN_SW_CTRL (DISALLOWED)",
+ "SSC_PWR_EN",
+ "VOL_DOWN_N",
+ "VOL_UP_N",
+ "SNAPSHOT_N",
+ "FOCUS_N",
+ "FLASH_THERM",
+ "", /* GPIO_10 */
+ "",
+ "",
+ "DIV_CLK1",
+ "NC",
+ "NC (DISALLOWED)",
+ "DIV_CLK3",
+ "NC",
+ "NC",
+ "NC",
+ "NC (DISALLOWED)", /* GPIO_20 */
+ "NFC_CLK_REQ",
+ "NC (DISALLOWED)",
+ "WCSS_PWR_REQ",
+ "OPTION_1 (DISALLOWED)",
+ "OPTION_2 (DISALLOWED)",
+ "PM_SLB (DISALLOWED)";
+
vol_down_pin_a: vol-down-active-state {
pins = "gpio5";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -336,6 +370,21 @@ audio_mclk_pin: audio-mclk-pin-active-state {
};
&pmi8998_gpios {
+ gpio-line-names = "MAIN_CAM_PWR_IO_EN", /* GPIO_1 */
+ "NC",
+ "NC",
+ "TYPEC_UUSB_SEL",
+ "VIB_LDO_EN",
+ "NC",
+ "DISPLAY_TYPE_SEL",
+ "NC",
+ "NC",
+ "NC", /* GPIO_10 */
+ "NC",
+ "DIV_CLK3",
+ "SPMI_I2C_SEL",
+ "NC";
+
cam_vio_default: cam-vio-active-state {
pins = "gpio1";
function = PMIC_GPIO_FUNC_NORMAL;
@@ -590,6 +639,156 @@ &sdhc2 {
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
+ gpio-line-names = "", /* GPIO_0 */
+ "",
+ "",
+ "",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "MDP_VSYNC_P", /* GPIO_10 */
+ "RGBC_IR_INT",
+ "NFC_VEN",
+ "CAM_MCLK0",
+ "CAM_MCLK1",
+ "NC",
+ "NC",
+ "CCI_I2C_SDA0",
+ "CCI_I2C_SCL0",
+ "CCI_I2C_SDA1",
+ "CCI_I2C_SCL1", /* GPIO_20 */
+ "MAIN_CAM_PWR_EN",
+ "TOF_INT_N",
+ "NC",
+ "NC",
+ "CHAT_CAM_PWR_EN",
+ "NC",
+ "TOF_RESET_N",
+ "CAM2_RSTN",
+ "NC",
+ "CAM1_RSTN", /* GPIO_30 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "CC_DIR",
+ "UIM2_DETECT_EN",
+ "FP_RESET_N", /* GPIO_40 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "BT_HCI_UART_TXD",
+ "BT_HCI_UART_RXD",
+ "BT_HCI_UART_CTS_N",
+ "BT_HCI_UART_RFR_N",
+ "NC",
+ "NC", /* GPIO_50 */
+ "NC",
+ "NC",
+ "CODEC_INT2_N",
+ "CODEC_INT1_N",
+ "APPS_I2C_SDA",
+ "APPS_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "NC",
+ "NC",
+ "NC", /* GPIO_60 */
+ "NC",
+ "NC",
+ "TRAY2_DET_DS",
+ "CODEC_RST_N",
+ "WSA_L_EN",
+ "WSA_R_EN",
+ "NC",
+ "NC",
+ "NC",
+ "LPASS_SLIMBUS_CLK", /* GPIO_70 */
+ "LPASS_SLIMBUS_DATA0",
+ "LPASS_SLIMBUS_DATA1",
+ "BT_FM_SLIMBUS_DATA",
+ "BT_FM_SLIMBUS_CLK",
+ "NC",
+ "RF_LCD_ID_EN",
+ "NC",
+ "NC",
+ "NC",
+ "NC", /* GPIO_80 */
+ "SW_SERVICE",
+ "TX_GTR_THRES_IN",
+ "HW_ID0",
+ "HW_ID1",
+ "NC",
+ "NC",
+ "TS_I2C_SDA",
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "NC", /* GPIO_90 */
+ "NC",
+ "NFC_IRQ",
+ "NFC_DWLD_EN",
+ "DISP_RESET_N",
+ "TRAY2_DET",
+ "CAM_SOF",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "DEBUG_GPIO0",
+ "DEBUG_GPIO1", /* GPIO_100 */
+ "GRFC4",
+ "NC",
+ "NC",
+ "RSVD",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK", /* GPIO_110 */
+ "UIM1_RST",
+ "UIM1_PRESENT",
+ "UIM_BATT_ALARM",
+ "RSVD",
+ "NC",
+ "NC",
+ "ACCEL_INT",
+ "GYRO_INT",
+ "COMPASS_INT",
+ "ALS_PROX_INT_N", /* GPIO_120 */
+ "FP_INT_N",
+ "NC",
+ "BAROMETER_INT",
+ "ACC_COVER_OPEN",
+ "TS_INT_N",
+ "NC",
+ "NC",
+ "USB_DETECT_EN",
+ "NC",
+ "QLINK_REQUEST", /* GPIO_130 */
+ "QLINK_ENABLE",
+ "NC",
+ "NC",
+ "WMSS_RESET_N",
+ "PA_INDICATOR_OR",
+ "NC",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK", /* GPIO_140 */
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "MSS_LTE_COXM_TXD",
+ "MSS_LTE_COXM_RXD",
+ "RFFE2_DATA",
+ "RFFE2_CLK",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
mdp_vsync_n: mdp-vsync-n-state {
pins = "gpio10";
--
2.39.2
Powered by blists - more mailing lists