| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <dda4c31e-e9d3-ec3d-c63e-71b3ad99734c@collabora.com>
Date: Tue, 14 Mar 2023 10:05:18 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: "Garmin.Chang" <Garmin.Chang@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Richard Cochran <richardcochran@...il.com>
Cc: Project_Global_Chrome_Upstream_Group@...iatek.com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-mediatek@...ts.infradead.org,
linux-clk@...r.kernel.org, netdev@...r.kernel.org
Subject: Re: [PATCH v6 02/19] clk: mediatek: Add MT8188 apmixedsys clock
support
Il 09/03/23 14:54, Garmin.Chang ha scritto:
> Add MT8188 apmixedsys clock controller which provides Plls
> generated from SoC 26m and ssusb clock gate control.
>
> Signed-off-by: Garmin.Chang <Garmin.Chang@...iatek.com>
> ---
> drivers/clk/mediatek/Kconfig | 11 ++
> drivers/clk/mediatek/Makefile | 1 +
> drivers/clk/mediatek/clk-mt8188-apmixedsys.c | 154 +++++++++++++++++++
> 3 files changed, 166 insertions(+)
> create mode 100644 drivers/clk/mediatek/clk-mt8188-apmixedsys.c
>
> diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
> index 2d14855dd37e..d7115089c4f6 100644
> --- a/drivers/clk/mediatek/Kconfig
> +++ b/drivers/clk/mediatek/Kconfig
> @@ -604,6 +604,17 @@ config COMMON_CLK_MT8186
> help
> This driver supports MediaTek MT8186 clocks.
>
> +config COMMON_CLK_MT8188
> + bool "Clock driver for MediaTek MT8188"
this can be a tristate.
> + depends on ARM64 || COMPILE_TEST
> + select COMMON_CLK_MEDIATEK
> + default ARCH_MEDIATEK
> + help
> + This driver supports MediaTek MT8188 basic clocks and clocks
> + required for various peripheral found on MediaTek. Choose
> + M or Y here if you want to use clocks such as peri_ao,
> + infra_ao, etc.
> +
> config COMMON_CLK_MT8192
> bool "Clock driver for MediaTek MT8192"
> depends on ARM64 || COMPILE_TEST
> diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
> index e5d018270ed0..1f822fcf6084 100644
> --- a/drivers/clk/mediatek/Makefile
> +++ b/drivers/clk/mediatek/Makefile
> @@ -91,6 +91,7 @@ obj-$(CONFIG_COMMON_CLK_MT8186) += clk-mt8186-mcu.o clk-mt8186-topckgen.o clk-mt
> clk-mt8186-mfg.o clk-mt8186-mm.o clk-mt8186-wpe.o \
> clk-mt8186-img.o clk-mt8186-vdec.o clk-mt8186-venc.o \
> clk-mt8186-cam.o clk-mt8186-mdp.o clk-mt8186-ipe.o
> +obj-$(CONFIG_COMMON_CLK_MT8188) += clk-mt8188-apmixedsys.o
> obj-$(CONFIG_COMMON_CLK_MT8192) += clk-mt8192.o
> obj-$(CONFIG_COMMON_CLK_MT8192_AUDSYS) += clk-mt8192-aud.o
> obj-$(CONFIG_COMMON_CLK_MT8192_CAMSYS) += clk-mt8192-cam.o
> diff --git a/drivers/clk/mediatek/clk-mt8188-apmixedsys.c b/drivers/clk/mediatek/clk-mt8188-apmixedsys.c
> new file mode 100644
> index 000000000000..db64340386d9
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt8188-apmixedsys.c
> @@ -0,0 +1,154 @@
> +// SPDX-License-Identifier: GPL-2.0-only
// SPDX ...
/*
* Copyright ...
* Author ..
*/
> +//
> +// Copyright (c) 2022 MediaTek Inc.
> +// Author: Garmin Chang <garmin.chang@...iatek.com>
> +
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
Please order by name: dt-bindings goes first.
> +
> +#include "clk-gate.h"
> +#include "clk-mtk.h"
> +#include "clk-pll.h"
> +
> +static const struct mtk_gate_regs apmixed_cg_regs = {
> + .set_ofs = 0x8,
> + .clr_ofs = 0x8,
> + .sta_ofs = 0x8,
> +};
> +
> +#define GATE_APMIXED(_id, _name, _parent, _shift) \
> + GATE_MTK(_id, _name, _parent, &apmixed_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
> +
> +static const struct mtk_gate apmixed_clks[] = {
> + GATE_APMIXED(CLK_APMIXED_PLL_SSUSB26M_EN, "pll_ssusb26m_en", "clk26m", 1),
> +};
> +
> +#define MT8188_PLL_FMAX (3800UL * MHZ)
> +#define MT8188_PLL_FMIN (1500UL * MHZ)
> +#define MT8188_INTEGER_BITS 8
> +
> +#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, \
> + _rst_bar_mask, _pcwbits, _pd_reg, _pd_shift, \
> + _tuner_reg, _tuner_en_reg, _tuner_en_bit, \
> + _pcw_reg, _pcw_shift, _pcw_chg_reg, \
> + _en_reg, _pll_en_bit) { \
> + .id = _id, \
> + .name = _name, \
> + .reg = _reg, \
> + .pwr_reg = _pwr_reg, \
> + .en_mask = _en_mask, \
> + .flags = _flags, \
> + .rst_bar_mask = _rst_bar_mask, \
> + .fmax = MT8188_PLL_FMAX, \
> + .fmin = MT8188_PLL_FMIN, \
> + .pcwbits = _pcwbits, \
> + .pcwibits = MT8188_INTEGER_BITS, \
> + .pd_reg = _pd_reg, \
> + .pd_shift = _pd_shift, \
> + .tuner_reg = _tuner_reg, \
> + .tuner_en_reg = _tuner_en_reg, \
> + .tuner_en_bit = _tuner_en_bit, \
> + .pcw_reg = _pcw_reg, \
> + .pcw_shift = _pcw_shift, \
> + .pcw_chg_reg = _pcw_chg_reg, \
> + .en_reg = _en_reg, \
> + .pll_en_bit = _pll_en_bit, \
> + }
> +
> +static const struct mtk_pll_data plls[] = {
> + PLL(CLK_APMIXED_ETHPLL, "ethpll", 0x044C, 0x0458, 0,
> + 0, 0, 22, 0x0450, 24, 0, 0, 0, 0x0450, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x0514, 0x0520, 0,
> + 0, 0, 22, 0x0518, 24, 0, 0, 0, 0x0518, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_TVDPLL1, "tvdpll1", 0x0524, 0x0530, 0,
> + 0, 0, 22, 0x0528, 24, 0, 0, 0, 0x0528, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_TVDPLL2, "tvdpll2", 0x0534, 0x0540, 0,
> + 0, 0, 22, 0x0538, 24, 0, 0, 0, 0x0538, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0544, 0x0550, 0xff000000,
> + HAVE_RST_BAR, BIT(23), 22, 0x0548, 24, 0, 0, 0, 0x0548, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x045C, 0x0468, 0xff000000,
> + HAVE_RST_BAR, BIT(23), 22, 0x0460, 24, 0, 0, 0, 0x0460, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_IMGPLL, "imgpll", 0x0554, 0x0560, 0,
> + 0, 0, 22, 0x0558, 24, 0, 0, 0, 0x0558, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x0504, 0x0510, 0xff000000,
> + HAVE_RST_BAR, BIT(23), 22, 0x0508, 24, 0, 0, 0, 0x0508, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_ADSPPLL, "adsppll", 0x042C, 0x0438, 0,
> + 0, 0, 22, 0x0430, 24, 0, 0, 0, 0x0430, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_APLL1, "apll1", 0x0304, 0x0314, 0,
> + 0, 0, 32, 0x0308, 24, 0x0034, 0x0000, 12, 0x030C, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_APLL2, "apll2", 0x0318, 0x0328, 0,
> + 0, 0, 32, 0x031C, 24, 0x0038, 0x0000, 13, 0x0320, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_APLL3, "apll3", 0x032C, 0x033C, 0,
> + 0, 0, 32, 0x0330, 24, 0x003C, 0x0000, 14, 0x0334, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_APLL4, "apll4", 0x0404, 0x0414, 0,
> + 0, 0, 32, 0x0408, 24, 0x0040, 0x0000, 15, 0x040C, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_APLL5, "apll5", 0x0418, 0x0428, 0,
> + 0, 0, 32, 0x041C, 24, 0x0044, 0x0000, 16, 0x0420, 0, 0, 0, 9),
> + PLL(CLK_APMIXED_MFGPLL, "mfgpll", 0x0340, 0x034C, 0,
> + 0, 0, 22, 0x0344, 24, 0, 0, 0, 0x0344, 0, 0, 0, 9),
> +};
> +
> +static const struct of_device_id of_match_clk_mt8188_apmixed[] = {
> + { .compatible = "mediatek,mt8188-apmixedsys", },
You don't need the comma after compatible
{ .compatible = "mediatek,mt8188-apmixedsys" },
> + {}
At the end, please say what the last entry is; a common way to do this is:
{ /* sentinel */ }
...since that's a sentinel! :-)
> +};
You miss just one little step for module auto-loading here.
MODULE_DEVICE_TABLE(of, of_match_clk_mt8188_apmixed);
> +
> +static int clk_mt8188_apmixed_probe(struct platform_device *pdev)
> +{
> + struct clk_hw_onecell_data *clk_data;
> + struct device_node *node = pdev->dev.of_node;
> + int r;
> +
> + clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + r = mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
> + if (r)
> + goto free_apmixed_data;
> +
> + r = mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
> + ARRAY_SIZE(apmixed_clks), clk_data);
> + if (r)
> + goto unregister_plls;
> +
> + r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
> + if (r)
> + goto unregister_gates;
> +
> + platform_set_drvdata(pdev, clk_data);
> +
> + return r;
Reaching this point means that no error occurred, so here...
return 0;
> +
> +unregister_gates:
> + mtk_clk_unregister_gates(apmixed_clks, ARRAY_SIZE(apmixed_clks), clk_data);
> +unregister_plls:
> + mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
> +free_apmixed_data:
> + mtk_free_clk_data(clk_data);
> + return r;
> +}
> +
> +static int clk_mt8188_apmixed_remove(struct platform_device *pdev)
> +{
> + struct device_node *node = pdev->dev.of_node;
> + struct clk_hw_onecell_data *clk_data = platform_get_drvdata(pdev);
> +
> + of_clk_del_provider(node);
> + mtk_clk_unregister_gates(apmixed_clks, ARRAY_SIZE(apmixed_clks), clk_data);
> + mtk_clk_unregister_plls(plls, ARRAY_SIZE(plls), clk_data);
> + mtk_free_clk_data(clk_data);
> +
> + return 0;
> +}
> +
> +static struct platform_driver clk_mt8188_apmixed_drv = {
> + .probe = clk_mt8188_apmixed_probe,
> + .remove = clk_mt8188_apmixed_remove,
> + .driver = {
> + .name = "clk-mt8188-apmixed",
> + .of_match_table = of_match_clk_mt8188_apmixed,
> + },
> +};
> +builtin_platform_driver(clk_mt8188_apmixed_drv);
You can change builtin_platform_driver() to module_platform_driver() here to
achieve modularity.
Regards,
Angelo
Powered by blists - more mailing lists