linux-kernel - [PATCH v2 16/23] arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 14 Mar 2023 11:24:02 +0100
From:   Philippe Schenker <dev@...henker.ch>
To:     devicetree@...r.kernel.org, Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>
Cc:     NXP Linux Team <linux-imx@....com>,
        Frank Rowand <frowand.list@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Fabio Estevam <festevam@...il.com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        linux-arm-kernel@...ts.infradead.org,
        Philippe Schenker <philippe.schenker@...adex.com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH v2 16/23] arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card

From: Philippe Schenker <philippe.schenker@...adex.com>

Many Colibri carrier boards are using 3.3V pull-up resistors on the
SD-Card connector. Letting it switch to 1.8V is an invalid state.

Do prevent this from happening by keeping the signaling voltage at 3.3V.

Signed-off-by: Philippe Schenker <philippe.schenker@...adex.com>
---

(no changes since v1)

 arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index 61033b79e44e..2e228c5b8109 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -304,6 +304,7 @@ &usdhc2 {
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
 	disable-wp;
+	no-1-8-v;
 };
 
 &iomuxc {
-- 
2.39.2