| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAA8EJpoL15vW0MnW2af4RLsW9_G3PQAxBdJJb0rvFY7Jfv2uPA@mail.gmail.com>
Date: Tue, 14 Mar 2023 13:34:11 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: "Sankeerth Billakanti (QUIC)" <quic_sbillaka@...cinc.com>
Cc: "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-arm-msm@...r.kernel.org" <linux-arm-msm@...r.kernel.org>,
"freedreno@...ts.freedesktop.org" <freedreno@...ts.freedesktop.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"robdclark@...il.com" <robdclark@...il.com>,
"seanpaul@...omium.org" <seanpaul@...omium.org>,
"swboyd@...omium.org" <swboyd@...omium.org>,
"Kalyan Thota (QUIC)" <quic_kalyant@...cinc.com>,
"Abhinav Kumar (QUIC)" <quic_abhinavk@...cinc.com>,
"dianders@...omium.org" <dianders@...omium.org>,
"Kuogee Hsieh (QUIC)" <quic_khsieh@...cinc.com>,
"Bjorn Andersson (QUIC)" <quic_bjorande@...cinc.com>,
"sean@...rly.run" <sean@...rly.run>,
"airlied@...ux.ie" <airlied@...ux.ie>,
"daniel@...ll.ch" <daniel@...ll.ch>,
"Vishnuvardhan Prodduturi (QUIC)" <quic_vproddut@...cinc.com>
Subject: Re: [RFC PATCH 1/2] drm/msm/dp: enumerate edp panel during driver probe
On Tue, 14 Mar 2023 at 12:23, Sankeerth Billakanti (QUIC)
<quic_sbillaka@...cinc.com> wrote:
>
> Hi Dmitry,
>
> >>>>
> >>>> The eDP panel is identified and enumerated during probe of the
> >>>> panel-edp driver. The current DP driver triggers this panel-edp
> >>>> driver probe while getting the panel-bridge associated with the eDP
> >>>> panel from the platform driver bind. If the panel-edp probe is
> >>>> deferred, then the whole bunch of MDSS parent and child drivers have
> >>>> to defer and
> >>> roll back.
> >>>
> >>> No, MDSS has not been rolled back since 5.19. Please shift your
> >>> development on top of the current msm-next.
> >>>
> >>
> >> Okay, I will move to the msm-next tip.
> >>
> >>>>
> >>>> So, we want to move the panel enumeration from bind to probe so that
> >>>> the probe defer is easier to handle and also both the drivers appear
> >>>> consistent in panel enumeration. This change moves the DP driver
> >>>> panel-bridge enumeration to probe.
> >>>>
> >>>> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@...cinc.com>
> >>>> ---
> >>>> drivers/gpu/drm/msm/dp/dp_aux.c | 149
> >>> ++++++++++++++++++++++++++--
> >>>> drivers/gpu/drm/msm/dp/dp_catalog.c | 12 +++
> >>>> drivers/gpu/drm/msm/dp/dp_catalog.h | 1 +
> >>>> drivers/gpu/drm/msm/dp/dp_display.c | 80 ++++++---------
> >>>> 4 files changed, 182 insertions(+), 60 deletions(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
> >>>> b/drivers/gpu/drm/msm/dp/dp_aux.c index
> >cc3efed593aa..5da95dfdeede
> >>>> 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> >>>> @@ -110,7 +110,7 @@ static ssize_t dp_aux_write(struct
> >>>> dp_aux_private *aux, }
> >>>>
> >>>> static ssize_t dp_aux_cmd_fifo_tx(struct dp_aux_private *aux,
> >>>> - struct drm_dp_aux_msg *msg)
> >>>> + struct drm_dp_aux_msg *msg, bool poll)
> >>>
> >>> What is the reason for working in polled mode rather than always
> >>> using the interrupts?
> >>>
> >>
> >> The mdss interrupts will be enabled and can be used after msm_irq_install
> >from msm_drm_bind.
> >> We want to perform aux transactions during probe. The aux data
> >> transmission is followed by an interrupt to indicate successful transmission
> >status and reply information.
> >
> >This is the price of developing on, let me guess, 5.15. Nowadays MDSS
> >interrupts are enabled and can be used during dp_display_probe() and
> >dp_display_bind(). If they can not for some reason, this is an issue that must
> >be fixed. Please reconsider your approach after rebasing onto msm-next or
> >6.3-rc1.
> >
>
> On the msm-next also, I see the mdss irq is enabled from bind (in msm_drv.c).
> msm_drm_bind -> msm_drm_init -> msm_irq_install
MDSS IRQ domain is registered from mdss_probe() -> msm_mdss_init() ->
_msm_mdss_irq_domain_add().
Please note the difference between MDSS IRQs (handled by MDSS) vs
MDP/DPU irq (registered by msm_irq_install()).
> Currently, interrupts will not be available during the dp_display_probe.
I can not agree with you here.
> Is there a patch series which is enabling IRQs during mdss probe?
https://patchwork.freedesktop.org/series/98525/, merged for 5.19.
>
> >>
> >> As interrupts are not enabled, I took this polling approach for aux interrupts
> >during probe.
> >>
> >>>> {
> >>>> ssize_t ret;
> >>>> unsigned long time_left;
> >>>> @@ -121,10 +121,16 @@ static ssize_t dp_aux_cmd_fifo_tx(struct
> >>> dp_aux_private *aux,
> >>>> if (ret < 0)
> >>>> return ret;
> >>>>
> >>>> - time_left = wait_for_completion_timeout(&aux->comp,
> >>>> + if (!poll) {
> >>>> + time_left = wait_for_completion_timeout(&aux->comp,
> >>>> msecs_to_jiffies(250));
> >>>> - if (!time_left)
> >>>> - return -ETIMEDOUT;
> >>>> + if (!time_left)
> >>>> + return -ETIMEDOUT;
> >>>> + } else {
> >>>> + ret = dp_catalog_aux_poll_and_get_hw_interrupt(aux-
> >>catalog);
> >>>> + if (!ret)
> >>>> + dp_aux_isr(&aux->dp_aux);
> >>>> + }
> >>>>
> >>>> return ret;
> >>>> }
> >>>> @@ -238,7 +244,7 @@ static void
> >>> dp_aux_update_offset_and_segment(struct dp_aux_private *aux,
> >>>> */
> >>>> static void dp_aux_transfer_helper(struct dp_aux_private *aux,
> >>>> struct drm_dp_aux_msg *input_msg,
> >>>> - bool send_seg)
> >>>> + bool send_seg, bool poll)
> >>>> {
> >>>> struct drm_dp_aux_msg helper_msg;
> >>>> u32 message_size = 0x10;
> >>>> @@ -278,7 +284,7 @@ static void dp_aux_transfer_helper(struct
> >>> dp_aux_private *aux,
> >>>> helper_msg.address = segment_address;
> >>>> helper_msg.buffer = &aux->segment;
> >>>> helper_msg.size = 1;
> >>>> - dp_aux_cmd_fifo_tx(aux, &helper_msg);
> >>>> + dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
> >>>> }
> >>>>
> >>>> /*
> >>>> @@ -292,7 +298,7 @@ static void dp_aux_transfer_helper(struct
> >>> dp_aux_private *aux,
> >>>> helper_msg.address = input_msg->address;
> >>>> helper_msg.buffer = &aux->offset;
> >>>> helper_msg.size = 1;
> >>>> - dp_aux_cmd_fifo_tx(aux, &helper_msg);
> >>>> + dp_aux_cmd_fifo_tx(aux, &helper_msg, poll);
> >>>>
> >>>> end:
> >>>> aux->offset += message_size; @@ -300,6 +306,122 @@ static
> >>>> void dp_aux_transfer_helper(struct
> >>> dp_aux_private *aux,
> >>>> aux->segment = 0x0; /* reset segment at end of
> >>>> block */ }
> >>>>
> >>>> +/*
> >>>> + * This function does the real job to process an AUX transaction.
> >>>> + * It will call aux_reset() function to reset the AUX channel,
> >>>> + * if the waiting is timeout.
> >>>> + */
> >>>> +static ssize_t dp_aux_transfer_init(struct drm_dp_aux *dp_aux,
> >>>> + struct drm_dp_aux_msg *msg) {
> >>>> + ssize_t ret;
> >>>> + int const aux_cmd_native_max = 16;
> >>>> + int const aux_cmd_i2c_max = 128;
> >>>> + struct dp_aux_private *aux;
> >>>> +
> >>>> + aux = container_of(dp_aux, struct dp_aux_private, dp_aux);
> >>>> +
> >>>> + aux->native = msg->request & (DP_AUX_NATIVE_WRITE &
> >>>> + DP_AUX_NATIVE_READ);
> >>>> +
> >>>> + /* Ignore address only message */
> >>>> + if (msg->size == 0 || !msg->buffer) {
> >>>> + msg->reply = aux->native ?
> >>>> + DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
> >>>> + return msg->size;
> >>>> + }
> >>>> +
> >>>> + /* msg sanity check */
> >>>> + if ((aux->native && msg->size > aux_cmd_native_max) ||
> >>>> + msg->size > aux_cmd_i2c_max) {
> >>>> + DRM_ERROR("%s: invalid msg: size(%zu), request(%x)\n",
> >>>> + __func__, msg->size, msg->request);
> >>>> + return -EINVAL;
> >>>> + }
> >>>> +
> >>>> + mutex_lock(&aux->mutex);
> >>>> + if (!aux->initted) {
> >>>> + ret = -EIO;
> >>>> + goto exit;
> >>>> + }
> >>>> +
> >>>> + /*
> >>>> + * For eDP it's important to give a reasonably long wait here for HPD
> >>>> + * to be asserted. This is because the panel driver may have _just_
> >>>> + * turned on the panel and then tried to do an AUX transfer. The
> >panel
> >>>> + * driver has no way of knowing when the panel is ready, so it's up
> >>>> + * to us to wait. For DP we never get into this situation so let's
> >>>> + * avoid ever doing the extra long wait for DP.
> >>>> + */
> >>>> + if (aux->is_edp) {
> >>>> + ret = dp_catalog_aux_wait_for_hpd_connect_state(aux-
> >>catalog);
> >>>> + if (ret) {
> >>>> + DRM_DEBUG_DP("Panel not ready for aux transactions\n");
> >>>> + goto exit;
> >>>> + }
> >>>> + }
> >>>> +
> >>>> + dp_aux_update_offset_and_segment(aux, msg);
> >>>> + dp_aux_transfer_helper(aux, msg, true, true);
> >>>> +
> >>>> + aux->read = msg->request & (DP_AUX_I2C_READ &
> >>> DP_AUX_NATIVE_READ);
> >>>> + aux->cmd_busy = true;
> >>>> +
> >>>> + if (aux->read) {
> >>>> + aux->no_send_addr = true;
> >>>> + aux->no_send_stop = false;
> >>>> + } else {
> >>>> + aux->no_send_addr = true;
> >>>> + aux->no_send_stop = true;
> >>>> + }
> >>>> +
> >>>> + ret = dp_aux_cmd_fifo_tx(aux, msg, true);
> >>>> +
> >>>> + /* TODO: why is fifo_rx necessary here?
> >>>> + * Ideally fifo_rx need not be executed for an aux write
> >>>> + */
> >>>> + ret = dp_aux_cmd_fifo_rx(aux, msg);
> >>>> +
> >>>> + if (ret < 0) {
> >>>> + if (aux->native) {
> >>>> + aux->retry_cnt++;
> >>>> + if (!(aux->retry_cnt % MAX_AUX_RETRIES))
> >>>> + dp_catalog_aux_update_cfg(aux->catalog);
> >>>> + }
> >>>> + /* reset aux if link is in connected state */
> >>>> + if (dp_catalog_link_is_connected(aux->catalog))
> >>>> + dp_catalog_aux_reset(aux->catalog);
> >>>> + } else {
> >>>> + aux->retry_cnt = 0;
> >>>> + switch (aux->aux_error_num) {
> >>>> + case DP_AUX_ERR_NONE:
> >>>> + if (aux->read)
> >>>> + ret = dp_aux_cmd_fifo_rx(aux, msg);
> >>>> + msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_ACK :
> >>> DP_AUX_I2C_REPLY_ACK;
> >>>> + break;
> >>>> + case DP_AUX_ERR_DEFER:
> >>>> + msg->reply = aux->native ?
> >>>> + DP_AUX_NATIVE_REPLY_DEFER :
> >>> DP_AUX_I2C_REPLY_DEFER;
> >>>> + break;
> >>>> + case DP_AUX_ERR_PHY:
> >>>> + case DP_AUX_ERR_ADDR:
> >>>> + case DP_AUX_ERR_NACK:
> >>>> + case DP_AUX_ERR_NACK_DEFER:
> >>>> + msg->reply = aux->native ? DP_AUX_NATIVE_REPLY_NACK :
> >>> DP_AUX_I2C_REPLY_NACK;
> >>>> + break;
> >>>> + case DP_AUX_ERR_TOUT:
> >>>> + ret = -ETIMEDOUT;
> >>>> + break;
> >>>> + }
> >>>> + }
> >>>> +
> >>>> + aux->cmd_busy = false;
> >>>> +
> >>>> +exit:
> >>>> + mutex_unlock(&aux->mutex);
> >>>> +
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> /*
> >>>> * This function does the real job to process an AUX transaction.
> >>>> * It will call aux_reset() function to reset the AUX channel, @@
> >>>> -355,7 +477,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
> >>> *dp_aux,
> >>>> }
> >>>>
> >>>> dp_aux_update_offset_and_segment(aux, msg);
> >>>> - dp_aux_transfer_helper(aux, msg, true);
> >>>> + dp_aux_transfer_helper(aux, msg, true, false);
> >>>>
> >>>> aux->read = msg->request & (DP_AUX_I2C_READ &
> >>> DP_AUX_NATIVE_READ);
> >>>> aux->cmd_busy = true;
> >>>> @@ -368,7 +490,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
> >>> *dp_aux,
> >>>> aux->no_send_stop = true;
> >>>> }
> >>>>
> >>>> - ret = dp_aux_cmd_fifo_tx(aux, msg);
> >>>> + ret = dp_aux_cmd_fifo_tx(aux, msg, false);
> >>>> if (ret < 0) {
> >>>> if (aux->native) {
> >>>> aux->retry_cnt++; @@ -535,6 +657,15 @@
> >>>> struct drm_dp_aux *dp_aux_get(struct device *dev, struct dp_catalog
> >*catalog,
> >>>> aux->catalog = catalog;
> >>>> aux->retry_cnt = 0;
> >>>>
> >>>> + /*
> >>>> + * Use the drm_dp_aux_init() to use the aux adapter
> >>>> + * before registering aux with the DRM device.
> >>>> + */
> >>>> + aux->dp_aux.name = "dpu_dp_aux";
> >>>> + aux->dp_aux.dev = dev;
> >>>> + aux->dp_aux.transfer = dp_aux_transfer_init;
> >>>> + drm_dp_aux_init(&aux->dp_aux);
> >>>
> >>> How do you use the aux adapter? It should not be used before
> >>> aux->drm_dev is setup.
> >>>
> >>
> >> The drm_dev registration happens during the bind. But we need to use aux
> >during probe.
> >>
> >> The kernel doc for the drm_dp_aux_init function suggested we can use
> >> the adapter before drm_dev registration. So, I used this function to enable
> >the aux usage during probe.
> >
> >Then please also change __drm_printk() to use (drm) ? (drm->dev) : NULL as
> >a first argument to dev_##level##type. Otherwise the first AUX transfer error
> >before aux->drm_dev is set will oops the kernel. See how
> >drm_err() is expanded.
> >
>
> Okay, will add this also.
Good.
>
> >>
> >> /**
> >> * drm_dp_aux_init() - minimally initialise an aux channel
> >> * @aux: DisplayPort AUX channel
> >> *
> >> * If you need to use the drm_dp_aux's i2c adapter prior to registering it
> >with
> >> * the outside world, call drm_dp_aux_init() first.
> >>
> >>>> +
> >>>> return &aux->dp_aux;
> >>>> }
> >>>>
> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> b/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> index 676279d0ca8d..ccf0400176f0 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
> >>>> @@ -258,6 +258,18 @@ int
> >>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
> >>> *dp_catalog)
> >>>> 2000, 500000); }
> >>>>
> >>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
> >>>> +*dp_catalog) {
> >>>> + u32 aux;
> >>>> + struct dp_catalog_private *catalog = container_of(dp_catalog,
> >>>> + struct dp_catalog_private,
> >>>> +dp_catalog);
> >>>> +
> >>>> + return readl_poll_timeout(catalog->io->dp_controller.ahb.base +
> >>>> + REG_DP_INTR_STATUS,
> >>>> + aux, aux & DP_INTERRUPT_STATUS1,
> >>>> + 250, 250000); }
> >>>> +
> >>>> static void dump_regs(void __iomem *base, int len) {
> >>>> int i;
> >>>> diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> b/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> index 1f717f45c115..ad4a9e0f71f2 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_catalog.h
> >>>> @@ -87,6 +87,7 @@ void dp_catalog_aux_enable(struct dp_catalog
> >>>> *dp_catalog, bool enable); void dp_catalog_aux_update_cfg(struct
> >>>> dp_catalog *dp_catalog); int
> >>>> dp_catalog_aux_wait_for_hpd_connect_state(struct dp_catalog
> >>>> *dp_catalog);
> >>>> u32 dp_catalog_aux_get_irq(struct dp_catalog *dp_catalog);
> >>>> +int dp_catalog_aux_poll_and_get_hw_interrupt(struct dp_catalog
> >>>> +*dp_catalog);
> >>>>
> >>>> /* DP Controller APIs */
> >>>> void dp_catalog_ctrl_state_ctrl(struct dp_catalog *dp_catalog, u32
> >>>> state); diff --git a/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> b/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> index bde1a7ce442f..a5dcef040b74 100644
> >>>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >>>> @@ -275,13 +275,6 @@ static int dp_display_bind(struct device *dev,
> >struct
> >>> device *master,
> >>>> dp->dp_display.drm_dev = drm;
> >>>> priv->dp[dp->id] = &dp->dp_display;
> >>>>
> >>>> - rc = dp->parser->parse(dp->parser);
> >>>> - if (rc) {
> >>>> - DRM_ERROR("device tree parsing failed\n");
> >>>> - goto end;
> >>>> - }
> >>>> -
> >>>> -
> >>>> dp->drm_dev = drm;
> >>>> dp->aux->drm_dev = drm;
> >>>> rc = dp_aux_register(dp->aux); @@ -290,12 +283,6 @@ static int
> >>>> dp_display_bind(struct device *dev, struct device *master,
> >>>> goto end;
> >>>> }
> >>>>
> >>>> - rc = dp_power_client_init(dp->power);
> >>>> - if (rc) {
> >>>> - DRM_ERROR("Power client create failed\n");
> >>>> - goto end;
> >>>> - }
> >>>> -
> >>>> rc = dp_register_audio_driver(dev, dp->audio);
> >>>> if (rc) {
> >>>> DRM_ERROR("Audio registration Dp failed\n"); @@ -787,6
> >>>> +774,12 @@ static int dp_init_sub_modules(struct dp_display_private
> >*dp)
> >>>> goto error;
> >>>> }
> >>>>
> >>>> + rc = dp->parser->parse(dp->parser);
> >>>> + if (rc) {
> >>>> + DRM_ERROR("device tree parsing failed\n");
> >>>> + goto error;
> >>>> + }
> >>>> +
> >>>> dp->catalog = dp_catalog_get(dev, &dp->parser->io);
> >>>> if (IS_ERR(dp->catalog)) {
> >>>> rc = PTR_ERR(dp->catalog); @@ -803,6 +796,12 @@ static
> >>>> int dp_init_sub_modules(struct dp_display_private *dp)
> >>>> goto error;
> >>>> }
> >>>>
> >>>> + rc = dp_power_client_init(dp->power);
> >>>> + if (rc) {
> >>>> + DRM_ERROR("Power client create failed\n");
> >>>> + goto error;
> >>>> + }
> >>>> +
> >>>> dp->aux = dp_aux_get(dev, dp->catalog, dp->dp_display.is_edp);
> >>>> if (IS_ERR(dp->aux)) {
> >>>> rc = PTR_ERR(dp->aux); @@ -1338,12 +1337,29 @@ static
> >>>> int dp_display_probe(struct platform_device *pdev)
> >>>>
> >>>> platform_set_drvdata(pdev, &dp->dp_display);
> >>>>
> >>>> + if (dp->dp_display.is_edp) {
> >>>> + dp_display_host_init(dp);
> >>>> + dp_display_host_phy_init(dp);
> >>>> + dp_catalog_ctrl_hpd_config(dp->catalog);
> >>>> +
> >>>> + rc = devm_of_dp_aux_populate_bus(dp->aux, NULL);
> >>>
> >>> You should pass a real done_probing handler here, if you are going to
> >refactor
> >>> this piece of code. The done_probing should then shut down the
> >resources
> >>> and bind the component.
> >>>
> >>
> >> I removed the resource enabling part from probe in the next patch where I
> >implemented pm_runtime_ops.
> >> I moved the host_init, phy_init and hpd_config into runtime_resume and
> >calling pm_runtime_get_sync from aux_transfer.
> >
> >Next patch doesn't exist at this point. So, please, either reorder them,
> >or make this patch correct per se.
> >
> >Also, the key part is a call to component_add(). It should come from
> >done_probing callback. AUX bus probing is asynchronous. The kernel
> >registers a device and then it might take some time for the correct
> >driver to be loaded, etc. We clearly expect dp_display_bind to be used
> >only when the panel has been probed.
> >
>
>
> Okay, will add the done_probe function
Thank you.
>
> >>
> >>>> +
> >>>> + dp_display_host_phy_exit(dp);
> >>>> + dp_display_host_deinit(dp);
> >>>> +
> >>>> + if (rc) {
> >>>> + DRM_ERROR("failed to initialize panel, rc = %d\n", rc);
> >>>> + goto error;
> >>>> + }
> >>>> + }
> >>>> +
> >>>> rc = component_add(&pdev->dev, &dp_display_comp_ops);
> >>>> if (rc) {
> >>>> DRM_ERROR("component add failed, rc=%d\n", rc);
> >>>> dp_display_deinit_sub_modules(dp);
> >>>> }
> >>>>
> >>>> +error:
> >>>> return rc;
> >>>> }
> >>>>
> >>>> @@ -1546,40 +1562,8 @@ static int dp_display_get_next_bridge(struct
> >>>> msm_dp *dp) {
> >>>> int rc;
> >>>> struct dp_display_private *dp_priv;
> >>>> - struct device_node *aux_bus;
> >>>> - struct device *dev;
> >>>>
> >>>> dp_priv = container_of(dp, struct dp_display_private, dp_display);
> >>>> - dev = &dp_priv->pdev->dev;
> >>>> - aux_bus = of_get_child_by_name(dev->of_node, "aux-bus");
> >>>> -
> >>>> - if (aux_bus && dp->is_edp) {
> >>>> - dp_display_host_init(dp_priv);
> >>>> - dp_catalog_ctrl_hpd_config(dp_priv->catalog);
> >>>> - dp_display_host_phy_init(dp_priv);
> >>>> - enable_irq(dp_priv->irq);
> >>>> -
> >>>> - /*
> >>>> - * The code below assumes that the panel will finish probing
> >>>> - * by the time devm_of_dp_aux_populate_ep_devices()
> >returns.
> >>>> - * This isn't a great assumption since it will fail if the
> >>>> - * panel driver is probed asynchronously but is the best we
> >>>> - * can do without a bigger driver reorganization.
> >>>> - */
> >>>> - rc = of_dp_aux_populate_bus(dp_priv->aux, NULL);
> >>>> - of_node_put(aux_bus);
> >>>> - if (rc)
> >>>> - goto error;
> >>>> -
> >>>> - rc = devm_add_action_or_reset(dp->drm_dev->dev,
> >>>> - of_dp_aux_depopulate_bus_void,
> >>>> - dp_priv->aux);
> >>>> - if (rc)
> >>>> - goto error;
> >>>> - } else if (dp->is_edp) {
> >>>> - DRM_ERROR("eDP aux_bus not found\n");
> >>>> - return -ENODEV;
> >>>> - }
> >>>>
> >>>> /*
> >>>> * External bridges are mandatory for eDP interfaces: one has
> >>>> to @@ -1597,12 +1581,6 @@ static int dp_display_get_next_bridge(struct
> >>> msm_dp *dp)
> >>>> return 0;
> >>>> }
> >>>>
> >>>> -error:
> >>>> - if (dp->is_edp) {
> >>>> - disable_irq(dp_priv->irq);
> >>>> - dp_display_host_phy_exit(dp_priv);
> >>>> - dp_display_host_deinit(dp_priv);
> >>>> - }
> >>>> return rc;
> >>>> }
> >>>>
> >>>> --
> >>>> 2.39.0
> >>>>
> >>>
> >>>
> >>> --
> >>> With best wishes
> >>> Dmitry
> >
> >--
> >With best wishes
> >Dmitry
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists